Skip to the content
12345678

OPA2320AID

Texas InstrumentsExtended

-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.2pA 0.2pA 1.45mA 1.5uV/℃ 1.8V~5.5V 10V/us 114dB 2 20MHz 40uV 65mA 7nV/√Hz@10kHz EMI filtering/RF suppression、ESD protection、Built-in compensation、Reverse-phase input protection、Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHS

Part id
ti/OPA2320AID
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
5,700 at JLCPCB (C2863402)
Used on
3 open-source boards

Overview

The OPA2320AID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.2pA 0.2pA 1.45mA 1.5uV/℃ 1.8V~5.5V 10V/us 114dB 2 20MHz 40uV 65mA 7nV/√Hz@10kHz EMI filtering/RF suppression、ESD protection、Built-in compensation、Reverse-phase input protection、Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (Celestial_Opamp:TI OPA2320, from Altium's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 5,700 are in stock at JLCPCB (part C2863402). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1OUT A2–3+4V-8V+
Celestial_Opamp:TI OPA2320From Altium's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
1.8 V · V+ relative to V–, recommended operating min · p. 6
Supply, most
5.5 V · V+ relative to V–, recommended operating max · p. 6
Supply, absolute maximum
6 V · V+ relative to V–, absolute max · p. 6
Works from
-40 °C · Specified operating free-air temperature min · p. 6
Works up to
125 °C · Specified operating free-air temperature max · p. 6
Junction, hottest
150 °C · Junction temperature absolute max · p. 6
Takes working
2.9 mA · sum of two amplifiers' typical quiescent currents, VS = 5.5 V, IO = 0 mA, TA = 25°C · p. 9
Junction to air (D (SOIC))
122.6 K/W · Junction-to-ambient thermal resistance · p. 7
Junction to board (D (SOIC))
64 K/W · Junction-to-board thermal resistance · p. 7
Junction to case (D (SOIC))
67.1 K/W · Junction-to-case(top) thermal resistance · p. 7

What it is and has

11
Amplifiers
2 · p. 1
Input offset voltage
150 µV maximum · p. 1
CMRR
114 dB · p. 1
Input and output
Rail-to-rail · p. 1
Input bias current
0.9 pA maximum · p. 1
Input voltage noise density
7 nV/√Hz at 10 kHz · p. 1
Bandwidth
20 MHz · p. 1
Slew rate
10 V/µs · p. 1
Quiescent current
1.45 mA/Ch · p. 1
Single-supply voltage range
1.8 V to 5.5 V · p. 1
Stability
Unity-gain stable · p. 1

Specifications

57
ParameterConditionsAs printedPage
Supply, VS = (V+) – (V–) VSOver operating free-air temperature rangemax 6 V6
Signal input pin (2)Currentmin -10 · max 10 mA6
Operating range, TA TAAbsolute maximum temperature rangemin -40 · max 150 °C6
Junction, TJ TJmax 150 °C6
Storage, Tstg Tstgmin -65 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1); rating ±4000 Vmax 4000 V6
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101 (2); rating ±1000 Vmax 1000 V6
Electrostatic discharge V(ESD)Machine model (MM); rating ±200 Vmax 200 V6
Specified voltage VSOver operating free-air temperature rangemin 1.8 · max 5.5 V6
Specified temperature TAOperating free-air temperaturemin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJAOPA2320, D (SOIC), 8 PINStyp 122.6 °C/W7
Junction-to-case(top) thermal resistance RθJC(top)OPA2320, D (SOIC), 8 PINStyp 67.1 °C/W7
Junction-to-board thermal resistance RθJBOPA2320, D (SOIC), 8 PINStyp 64 °C/W7
Junction-to-top characterization parameter ψJTOPA2320, D (SOIC), 8 PINStyp 13.2 °C/W7
Junction-to-board characterization parameter ψJBOPA2320, D (SOIC), 8 PINStyp 63.4 °C/W7
Input offset voltage VOSTA = 25°Ctyp 40 · max 150 uV7
Input offset voltage vs temperature dVOS/dTVS = 5.5 V, TA = –40°C to 125°Ctyp 1.5 · max 5 uV/°C7
Input offset voltage vs power supply PSRVS = 1.8 V to 5.5 V, TA = 25°Ctyp 5 · max 20 uV/V7
Input offset voltage vs power supply PSRVS = 1.8 V to 5.5 V, TA = –40°C to 125°Ctyp 15 uV/V7
Channel separation1 kHztyp 130 dB7
Common-mode rejection ratio CMRRVS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = 25°Cmin 100 · typ 114 dB7
Common-mode rejection ratio CMRRVS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = –40°C to 125°Cmin 96 dB7
Input bias current IBTA = 25°C; typical ±0.2, maximum ±0.9typ 0.2 · max 0.9 pA7
Input bias current IBTA = –40°C to 85°C; maximum ±50max 50 pA7
Input bias current IBOPA2320; TA = –40°C to 125°C; maximum ±400max 400 pA7
Input offset current IOSTA = 25°C; typical ±0.2, maximum ±0.9typ 0.2 · max 0.9 pA7
Input offset current IOSTA = –40°C to 85°C; maximum ±50max 50 pA7
Input offset current IOSTA = –40°C to 125°C; maximum ±400max 400 pA7
Input voltage noisef = 0.1 Hz to 10 Hztyp 2.8 uVPP8
Input voltage noise density enf = 1 kHztyp 8.5 nV/√Hz8
Input voltage noise density enf = 10 kHztyp 7 nV/√Hz8
Input current noise density inf = 1 kHztyp 0.6 fA/√Hz8
DifferentialInput capacitancetyp 5 pF8
Common modeInput capacitancetyp 4 pF8
Open-loop voltage gain AOL0.1 V < VO < (V+) – 0.1 V, RL = 10 kΩ, TA = 25°Cmin 114 · typ 132 dB8
Open-loop voltage gain AOL0.1 V < VO < (V+) – 0.1 V, RL = 10 kΩ, TA = –40°C to 125°Cmin 100 · typ 130 dB8
Open-loop voltage gain AOL0.2 V < VO < (V+) – 0.2 V, RL = 2 kΩ, TA = 25°Cmin 108 · typ 123 dB8
Open-loop voltage gain AOL0.2 V < VO < (V+) – 0.2 V, RL = 2 kΩ, TA = –40°C to 125°Cmin 96 · typ 130 dB8
Phase margin PMVS = 5 V, CL = 50 pFtyp 47 °8
Gain bandwidth product GBPUnity gain; VS = 5 V, CL = 50 pFtyp 20 MHz8
Slew rate SRG = +1; VS = 5 V, CL = 50 pFtyp 10 V/us8
Settling time tSto 0.1%, 2-V step, G = +1; VS = 5 V, CL = 50 pFtyp 0.25 us8
Settling time tSto 0.01%, 2-V step, G = +1; VS = 5 V, CL = 50 pFtyp 0.32 us8
Settling time tSto 0.0015%, 2-V step, G = +1 (1); VS = 5 V, CL = 50 pF; based on simulationtyp 0.5 us8
Overload recovery timeVIN × G > VS; VS = 5 V, CL = 50 pFtyp 100 ns8
Total harmonic distortion + noise (2) THD+NVO = 4 VPP, G = 1, f = 10 kHz, RL = 10 kΩ; third-order filter, bandwidth = 80 kHz at –3 dBtyp 0.0005 %8
Total harmonic distortion + noise (2) THD+NVO = 2 VPP, G = 1, f = 10 kHz, RL = 600 Ω; third-order filter, bandwidth = 80 kHz at –3 dBtyp 0.0011 %8
Voltage output swing from both rails VORL = 10 kΩ, TA = 25°Ctyp 10 · max 20 mV8
Voltage output swing from both rails VORL = 2 kΩ, TA = 25°Ctyp 25 · max 35 mV8
Voltage output swing from both rails VORL = 10 kΩ, TA = –40°C to 125°Cmax 30 mV8
Voltage output swing from both rails VORL = 2 kΩ, TA = –40°C to 125°Cmax 45 mV8
Short-circuit current ISCVS = 5.5 V; typical ±65typ 65 mA8
Open-loop output resistance ROIO = 0 mA, f = 1 MHztyp 90 Ω8
Specified voltage VSmin 1.8 · max 5.5 V9
Quiescent current per amplifier, OPA2320 and OPA2320S IQOPA2320; IO = 0 mA, VS = 5.5 V, TA = 25°Ctyp 1.45 · max 1.6 mA9
Quiescent current per amplifier, OPA2320 and OPA2320S IQOPA2320; IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°Cmax 1.7 mA9
Power-on timeV+ = 0 V to 5 V, to 90% IQ leveltyp 28 us9

Pins, by the datasheet

6
2 –IN A
Inverting input, channel A. · p. 4
3 +IN A
Noninverting input, channel A. · p. 4
4 V–
Negative (lowest) power supply. · p. 4
5 +IN B
Noninverting input, channel B. · p. 4
6 –IN B
Inverting input, channel B. · p. 4
8 V+
Positive (highest) power supply. · p. 4

Open-source boards using it

3
  • 4 layers82.8 × 88.9 mmMetal detector test, the printed circuit board in 3D

    Metal detector test

    bobasaurus/lumber-plunder-metal-detector

    A VLF induction balance metal detector with a wooden body

    111 parts11GPL-3.0
  • 4 layers99.7 × 74.5 mmPolarimeter, the printed circuit board in 3D

    Polarimeter

    HearnChristian/polarimeter

    4-layer KiCad photodiode polarimeter: low-noise transimpedance front-end (OPA381/OPA320), precision REF3425 reference, LT8609/LP5912 power. Schematic, PCB, gerbers + BOM.

    66 parts
  • 4 layers100 × 80 mmTester dock, the printed circuit board in 3D

    Tester dock

    njcoburn/OPENIMAGESENSOR

    OPENIMAGESENSOR - An open source image sensor.

    81 partsApache-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2320AID?

Yes. The symbol is Celestial_Opamp:TI OPA2320 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2320AID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2320AID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2320AID?

JLCPCB lists it as part C2863402, with 5,700 in stock; the sellers' links on this page open their listings.

What can replace the OPA2320AID?

Parts like it in the library: the TS922IDT by STMicroelectronics, the LMV358B-SR by 3PEAK, the MC33178D by onsemi and the BUF634AID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2320AID?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.