Skip to the content
12345678

OPA2196ID

Texas InstrumentsExtended

-18V~-2.25V、2.25V~18V -40℃~+125℃ 140dB 140uA 15nV/√Hz@1kHz 2 2.5MHz 20pA 25uV 4.5V~36V 500nV/℃ 5pA 65mA 7.5V/us EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
ti/OPA2196ID
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
1,678 at JLCPCB (C2057972)
Used on
5 open-source boards

Overview

The OPA2196ID is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 140dB 140uA 15nV/√Hz@1kHz 2 2.5MHz 20pA 25uV 4.5V~36V 500nV/℃ 5pA 65mA 7.5V/us EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA2196xD, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,678 are in stock at JLCPCB (part C2057972). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:OPA2196xDFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA2196ID
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

5
  • 2 layers84.1 × 47.3 mmFinalPCB, the printed circuit board in 3D

    FinalPCB

    daumemo/DIY-Signal-Generator

    DIY portable Wi-Fi enabled signal generator

    143 parts45
  • 2 layers40 × 35 mmBPS Amperes, the printed circuit board in 3D

    BPS Amperes

    lhr-solar/BPS-AmperesPCB-Daybreak

    52 parts
  • 2 layers170 × 125 mmEload 4ch, the printed circuit board in 3D

    Eload 4ch

    metallarox/eload-60v

    Electronic load 60V

    143 partsCERN-OHL-S-2.0
  • 4 layers64 × 115 mmAmp board, the printed circuit board in 3D

    Amp board

    splogdes/Audio-Engine-A5-Input-Stage

    198 parts
  • 2 layers86 × 103 mmESP32 test board, the printed circuit board in 3D

    ESP32 test board

    JCastel358/Eltec406mca

    code for industrial automation process

    55 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2196ID?

Yes. The symbol is Amplifier_Operational:OPA2196xD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2196ID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2196ID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2196ID?

JLCPCB lists it as part C2057972, with 1,678 in stock; the sellers' links on this page open their listings.

What can replace the OPA2196ID?

Parts like it in the library: the TS922IDT by STMicroelectronics, the LMV358B-SR by 3PEAK, the MC33178D by onsemi and the BUF634AID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2196ID?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.