Skip to the content
12345678

NE5534D

Texas InstrumentsExtended

-20V~-3V、3V~20V 0℃~+70℃ 1 1.5uA 100dB 10MHz 13V/us 3.5nV/√Hz@1kHz 300nA 38mA 4mA 4mV Built-in compensation SOIC-8 Operational Amplifier ROHS

Part id
ti/NE5534D
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
2,579 at JLCPCB (C9916)
Used on
29 open-source boards

Overview

The NE5534D is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -20V~-3V、3V~20V 0℃~+70℃ 1 1.5uA 100dB 10MHz 13V/us 3.5nV/√Hz@1kHz 300nA 38mA 4mA 4mV Built-in compensation SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:NE5534, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 2,579 are in stock at JLCPCB (part C9916). 29 open-source boards in 24 repositories on GitHub use it.

Symbol

1BAL2-3+4V-5COMP67V+8C/B
Amplifier_Operational:NE5534From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the NE5534D
PinNameType
1BALInput
2-Input
3+Input
4V-Power in
5COMPInput
6—Output
7V+Power in
8C/BInput

Open-source boards using it

29See all 29
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146
  • 4 layers121.6 × 79.8 mmUsbSound, the printed circuit board in 3D

    UsbSound

    SteveSyfuhs/UsbSound

    A custom-made USB sound card for Balanced Audio

    91 parts12MIT
  • 2 layers52.6 × 25.9 mmPreampV3, the printed circuit board in 3D

    PreampV3

    ouspg/SOP-Robot

    Robot project for the Embedded Software Project [521275A] and Software Project [521479S]

    18 parts5
  • 2 layers74.2 × 87.1 mmNc1, the printed circuit board in 3D

    Nc1

    nietamten/VoltageConverterForSolar

    NCP1034 buck with regulated output voltage, output current, minimum input voltage

    76 parts4
  • 2 layers70 × 54.5 mm9v preamp, the printed circuit board in 3D

    9v preamp

    Supermagnum/piezo-9v

    A small PCB for pizoelectric amplifier, runs on 9V

    36 parts4CC0-1.0
  • 2 layers51 × 31 mmAudioAmplifierPCB, the printed circuit board in 3D

    AudioAmplifierPCB

    ODARI-CHARLES1/AudioAmplifierPCB-NE5532

    Audio Amplifier using NE5532 OP. AMP in KICAD

    16 parts2
  • 2 layers100 × 100 mmTRX RA3XDH, the printed circuit board in 3D

    TRX RA3XDH

    ra3xdh/TRX_RA3XDH_v2

    My HF transceiver project, PCBs and schematics

    264 parts2
  • 2 layers94.5 × 55.6 mmAudioFilter, the printed circuit board in 3D

    AudioFilter

    Acramonics/AudioFilter

    High-/Band-/Low-pass filter based on Jake Rothman's Audio Out, Practical Electronics May 2026

    60 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NE5534D?

Yes. The symbol is Amplifier_Operational:NE5534 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NE5534D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the NE5534D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the NE5534D?

JLCPCB lists it as part C9916, with 2,579 in stock; the sellers' links on this page open their listings.

What can replace the NE5534D?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358DT by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NE5534D?

29 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.