Skip to the content
12345

LP2980AIM5-3.0

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 125uA 150uVrms 16V 225mV@(50mA) 3V 50mA 63dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP2980AIM5-3.0
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
2,048 at JLCPCB (C181455)
Used on
2 open-source boards

Overview

The LP2980AIM5-3.0 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 125uA 150uVrms 16V 225mV@(50mA) 3V 50mA 63dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,048 are in stock at JLCPCB (part C181455). 2 open-source boards in 1 repository on GitHub use it.

Symbol

1IN3EN5OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the LP2980AIM5-3.0
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

2
  • 2 layers52.1 × 125.7 mmVent, the printed circuit board in 3D

    Vent

    waterloo-rocketry/flight_instr

    Hardware and software development tracking for Waterloo Rocketry's flight instrumentation system.

    82 parts1
  • 2 layers58.9 × 36.6 mmSensors dev, the printed circuit board in 3D

    Sensors dev

    waterloo-rocketry/flight_instr

    Hardware and software development tracking for Waterloo Rocketry's flight instrumentation system.

    44 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2980AIM5-3.0?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2980AIM5-3.0?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP2980AIM5-3.0 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2980AIM5-3.0?

JLCPCB lists it as part C181455, with 2,048 in stock; the sellers' links on this page open their listings.

What can replace the LP2980AIM5-3.0?

Parts like it in the library: the LP5907MFX-3.0 by Texas Instruments, the TPS7A0230PDBV by Texas Instruments, the TPS7A2030PDBV by Texas Instruments and the TPRT9013-30GB by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP2980AIM5-3.0?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.