Skip to the content
2 layers52.1 × 125.7 mmVent, the printed circuit board in 3D

Hardware and software development tracking for Waterloo Rocketry's flight instrumentation system.

Size
52.1 × 125.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
82
Nets
88
Pads
328
Tracks, vias
793, 74
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
28 Feb 2018
Updated
21 Jun 2019

Overview

Vent is an open-source printed circuit board by waterloo-rocketry, from the waterloo-rocketry/flight_instr repository on GitHub. It is a 2-layer board of 52.1 × 125.7 mm with 82 parts on 88 nets, routed with 793 tracks and 74 vias.

It is built around the SN74LVC2T45DCU, R-78E3.3-0.5 and SPU01M-15, with the MS560702BA03-50, BMG250 and LP2980AIM5-3.0 among its other parts. Its parts include 29 resistors, 18 capacitors, 11 ICs, 8 transistors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

11

README

README.md

flight_instr

This is the flight/engine instrumentation system used in Waterloo Rocketry's 2018 rocket, Unexploded Ordnance (UXO). This repository tracks the hardware and software used in this system. The flight instrumentation PCB is a monolithic board containing an Arduino Nano, an SD card, a digital sensor suite, an analog sensor suite, a radio transceiver, and an H-bridge valve driver. Two copies of this board were used in UXO to successfully launch the rocket to 13000 ft.

This system is no longer in use. It has been replaced by RocketCAN, a collection of boards that implement the functionality of flight instrumentation in a modular manner. The new system is tracked in the canhw, canlib, and cansw_* repositories.

Injector board assembly

Alt text

Vent board assembly

Alt text

Parts

82
QtyValueFootprintReferences
1810KResistors_SMD:R_0805_HandSolderingR4, R5, R7, R10, R11, R12, R13, R14, R15, R16, R19, R22, R23, R26, R31, R32 +2
7RResistors_SMD:R_0805_HandSolderingR1, R17, R18, R27, R28, R29, R30
610nFCapacitors_SMD:C_0805_HandSolderingC4, C5, C8, C9, C10, C11
4100nFCapacitors_SMD:C_0805_HandSolderingC12, C13, C16, C17
4270Resistors_SMD:R_0805_HandSolderingR20, R21, R24, R25
4BAS16GWJFlight_Instr:D_SOD-123_HandSolderingD3, D4, D5, D6
4DMG2302UKTO_SOT_Packages_SMD:SOT-23_HandsolderingQ1, Q2, Q5, Q6
3SN74LVC2T45Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mmU2, U4, U5
20891020.NXSFlight_Instr:PC_AutoFuse_HolderF1, F2
210uFCapacitors_SMD:C_0805_HandSolderingC1, C2
2AOD417TO_SOT_Packages_SMD:TO-252-2Q3, Q4
2AOD476TO_SOT_Packages_SMD:TO-252-2Q7, Q8
2LSM6DS3HTRFlight_Instr:LSM6DS3HTRU7, U9
11uFCapacitors_ThroughHole:CP_Radial_Tantal_D5.0mm_P2.50mmC14
11uFCapacitors_SMD:C_0805_HandSolderingC7
12.2uFCapacitors_ThroughHole:CP_Radial_Tantal_D5.0mm_P2.50mmC15
14.7uFCapacitors_SMD:C_0805_HandSolderingC18
147uFCapacitors_ThroughHole:CP_Radial_Tantal_D5.0mm_P2.50mmC3
18.2pFCapacitors_SMD:C_0805_HandSolderingC6
1A-DF 15 A/KG-T2SConnector_Dsub:DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mmJ1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1BMG250Flight_Instr:Bosch_LGA-14U8
1LOGOTeam_Logo:Logo_SilkScreen_10mmG***
1LP2980AIM5-3.0TO_SOT_Packages_SMD:SOT-23-5_HandSolderingU6
1MS5607-02BA03Flight_Instr:MS560702BA03U10
1OSTYK21106030Flight_Instr:Barrier_Strip_6CircuitJ14
1OSTYK22102030Flight_Instr:Barrier_Strip_2CircuitJ2
1R-78E3.3-0.5Package_SIP:SIP3_11.6x8.5mmU1
1SD_Card_modifiedFlight_Instr:WM6698CT-NDJ11
1SPU01M-15Flight_Instr:SIP6_HousingU11
1XBEE_SC1Flight_Instr:Xbee_SC1U3

The 78 most common of 82 parts.

More from waterloo-rocketry/flight_instr

1
  • 2 layers58.9 × 36.6 mmSensors dev, the printed circuit board in 3D

    Sensors dev

    waterloo-rocketry/flight_instr

    Hardware and software development tracking for Waterloo Rocketry's flight instrumentation system.

    44 parts1

Similar boards

  • 2 layers56.9 × 61.3 mmPropulsionBoard, the printed circuit board in 3D

    PropulsionBoard

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    104 parts15GPL-3.0
  • 4 layers85 × 85 mmAVIONICS BOARD, the printed circuit board in 3D

    AVIONICS BOARD

    rgw3d/1KCubeSat_Hardware

    Hardware design files for my $1000 CubeSat.

    181 parts158GPL-3.0
  • 6 layers100 × 114 mmMTE USB HUB, the printed circuit board in 3D

    MTE USB HUB

    MicroType-Engineering/MTE_USB_HUB

    As designed on the MicroType Engineering's YouTube series: https://youtu.be/uzqXgHHZUUs

    159 parts41GPL-2.0
  • 2 layers69.6 × 80.4 mmUltrasonic localization, the printed circuit board in 3D

    Ultrasonic localization

    yycho0108/Eclectronics-Project-3

    Project 3 : Indoor Localization System for ENGR3430: Eclectronics

    212 parts
  • 2 layers70 × 45 mmCrowbar glitcher, the printed circuit board in 3D

    Crowbar glitcher

    joegrand/stm32-fault-injection

    STM32F2 / F4 Fault Injection

    44 parts55
  • 4 layers90 × 90 mmPump Controller, the printed circuit board in 3D

    Pump Controller

    citrineio/Pump-Controller-V2

    Second Version of the pump controller PCB

    68 partsApache-2.0
  • 4 layers60.1 × 105.8 mmMini boat pcb, the printed circuit board in 3D

    Mini boat pcb

    PUT-POWERTRAIN/mini-boat-pcb

    63 parts

Questions

How big is the Vent PCB?

It measures 52.1 × 125.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Vent use?

82 parts, built around the SN74LVC2T45DCU, R-78E3.3-0.5, SPU01M-15 and MS560702BA03-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vent KiCad files?

From the waterloo-rocketry/flight_instr repository on GitHub, at the commit this page was made from: the board is design/vent/vent.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vent design in my own project?

Its repository states no licence, so its author keeps all rights: ask waterloo-rocketry before reusing the design.