Skip to the content
12345678910111213141516

ADS8353IPW

Texas InstrumentsExtended

-40℃~+125℃ 16 1uA 2 2.5LSB 5V 600kHz 89dB Built-in No SPI Simultaneous sampling TSSOP-16 Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS8353IPW
Category
Analog To Digital Converters (ADC)
Package
TSSOP-16
Pins
16
In stock
881 at JLCPCB (C701691)
Used on
3 open-source boards

Overview

The ADS8353IPW is an analog To Digital Converter made by Texas Instruments in a TSSOP-16 package with 16 pins. -40℃~+125℃ 16 1uA 2 2.5LSB 5V 600kHz 89dB Built-in No SPI Simultaneous sampling TSSOP-16 Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS7853IPWR, from EasyEDA) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 881 are in stock at JLCPCB (part C701691). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1AINP_A2AINM_A3REFIO_A4REFGND_A5REFGND_B6REFIO_B7AINM_B8AINP_B9DVDD10SDI11CS#12SCLK13SDO_A14SDO_B15GND16AVDD
EasyEDA_Cloud:ADS7853IPWRFrom EasyEDA

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

Pinout

16
The pins of the ADS8353IPW
PinNameType
1AINP_AUnspecified
2AINM_AUnspecified
3REFIO_AUnspecified
4REFGND_AUnspecified
5REFGND_BUnspecified
6REFIO_BUnspecified
7AINM_BUnspecified
8AINP_BUnspecified
9DVDDUnspecified
10SDIUnspecified
11CS#Unspecified
12SCLKUnspecified
13SDO_AUnspecified
14SDO_BUnspecified
15GNDUnspecified
16AVDDUnspecified

Open-source boards using it

3
  • 4 layers47 × 47 mmMotor Gen2, the printed circuit board in 3D

    Motor Gen2

    RoMeLaUCLA/romela-motor-driver

    Motor driver PCB and firmware designed for RoMeLa actuators.

    151 parts6MIT
  • 4 layers66 × 46 mmRadar1, the printed circuit board in 3D

    Radar1

    HearnChristian/k-band-fmcw-radar

    24 GHz FMCW radar front-end in KiCad (WIP): ADF4159 chirp synth, BGT24LTR11 transceiver, custom Marki AMM-8211PSM driver-amp symbol/footprint, OPA1656 IF, ADS8353 ADC, FT2232H USB.

    99 parts3
  • 4 layers76.3 × 94.1 mmMotor Gen2P, the printed circuit board in 3D

    Motor Gen2P

    RoMeLaUCLA/romela-motor-driver

    Motor driver PCB and firmware designed for RoMeLa actuators.

    70 parts6MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADS8353IPW?

Yes. The symbol is EasyEDA_Cloud:ADS7853IPWR and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS8353IPW?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the ADS8353IPW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS8353IPW?

JLCPCB lists it as part C701691, with 881 in stock; the sellers' links on this page open their listings.

What can replace the ADS8353IPW?

Parts like it in the library: the ADS1220IPW by Texas Instruments, the ADS122C04IPW by Texas Instruments, the ADS7830IPW by Texas Instruments and the ADS1230IPW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS8353IPW?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.