Skip to the content
12345678910111213141516

ADS122C04IPW

Texas InstrumentsExtended

-40℃~+125℃ 1.024MHz、2.048MHz 2 2.3V~5.5V 24 2kHz 3uA Built-in Built-in Built-in temperature sensor、Multiplexers I2C Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS122C04IPW
Category
Analog To Digital Converters (ADC)
Package
TSSOP-16
Pins
16
In stock
3,959 at JLCPCB (C2872338)
Used on
8 open-source boards

Overview

The ADS122C04IPW is an analog To Digital Converter made by Texas Instruments in a TSSOP-16 package with 16 pins. -40℃~+125℃ 1.024MHz、2.048MHz 2 2.3V~5.5V 24 2kHz 3uA Built-in Built-in Built-in temperature sensor、Multiplexers I2C Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (SparkFun-IC-Conversion:ADS122C04IPWR, from Eagle libraries) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 3,959 are in stock at JLCPCB (part C2872338). 8 open-source boards in 7 repositories on GitHub use it.

Symbol

1A02A13RESET4DGND5AVSS6AIN37AIN28REFN16SCL15SDA14DRDY13DVDD12AVDD11AIN010AIN19REFP
SparkFun-IC-Conversion:ADS122C04IPWRFrom Eagle libraries

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

From the datasheet

15
Supply, least
2.3 V · AVDD to AVSS, unipolar recommended operating min · p. 4
Supply, most
5.5 V · AVDD to AVSS, unipolar recommended operating max · p. 4
Supply, most
2.75 V · AVDD to DGND, bipolar recommended operating max · p. 4
Supply, least
2.75 V · AVSS to DGND, bipolar recommended operating min · p. 4
Supply, most
2.3 V · AVSS to DGND, bipolar recommended operating max · p. 4
Supply, absolute maximum
7 V · AVDD to AVSS, absolute max · p. 4
Works from
-40 °C · Operating ambient temperature min · p. 4
Works up to
125 °C · Operating ambient temperature max · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
A pin gives at most
10 mA · Continuous input current, any pin except supplies, absolute max · p. 4
Takes working
425 µA · sum of AVDD and DVDD typical, normal mode, gain 1 to 16, 3.3 V, IDACs off, I2C inactive · p. 7
Takes asleep
400 nA · sum of AVDD and DVDD typical, power-down mode, 3.3 V · p. 7
Junction to air (TSSOP (PW))
90.3 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (TSSOP (PW))
31.7 K/W · Junction-to-case top thermal resistance · p. 5
Junction to board (TSSOP (PW))
41.8 K/W · Junction-to-board thermal resistance · p. 5

What it is and has

10
ADC
24-bit, 4-channel, 2 kSPS, delta-sigma, I2C interface · p. 1
Programmable gain
1 to 128 · p. 1
Analog inputs
2 differential or 4 single-ended · p. 1
Voltage reference
2.048 V internal; typical drift 5 ppm/°C · p. 1
Oscillator
Internal, 2% accuracy · p. 1
Temperature sensor
Internal, typical accuracy 0.5°C · p. 1
Interface
I2C compatible · p. 1
ADC
24-bit, 4 channels, up to 2 kSPS, I2C interface · p. 1
Programmable data rate
Up to 2 kSPS · p. 1
Effective resolution
Up to 20 bits · p. 1

Around it

6
cap 100-nF (or larger)
between AVDD and AVSS; Analog supply capacitor. · p. 3
cap 100-nF (or larger)
between DVDD and DGND; Digital supply capacitor. · p. 3
cap at least 0.1 µF
between AVDD and GND; Supply bypass capacitor; place close to the supply pin. MLCC recommended. · p. 61
res 1 kΩ
between Thermocouple and AIN1; RF1 in the thermocouple application input filter. · p. 52
cap 100 nF
between AIN0 and AIN1; CDIF in the thermocouple application differential input filter. · p. 52
cap 10 nF
between AIN1 and GND; CCM1 in the thermocouple application common-mode input filter. · p. 52

Specifications

95
ParameterConditionsAs printedPage
Power-supply voltageAVDD to AVSSmin -0.3 · max 7 V4
Power-supply voltageDVDD to DGNDmin -0.3 · max 7 V4
Power-supply voltageAVSS to DGNDmin -2.8 · max 0.3 V4
Digital input voltageSCL, SDA, A0, A1, DRDY, RESET; min DGND – 0.3max 7 V4
Input currentContinuous, any pin except power-supply pinsmin -10 · max 10 mA4
Temperature TJJunctionmax 150 °C4
Temperature TstgStoragemin -60 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±750 Vmax 750 V4
Unipolar analog power supplyAVDD to AVSSmin 2.3 · max 5.5 V4
Unipolar analog power supplyAVSS to DGND; nominal 0 Vmin -0.1 · typ 0 · max 0.1 V4
Bipolar analog power supplyAVDD to DGND; nominal 2.5 Vmin 2.3 · typ 2.5 · max 2.75 V4
Bipolar analog power supplyAVSS to DGND; nominal –2.5 Vmin -2.75 · typ -2.5 · max -2.3 V4
Digital power supplyDVDD to DGNDmin 2.3 · max 5.5 V4
Differential reference input voltage VREFVREF = V(REFP) – V(REFN); nominal 2.5 V; max AVDD – AVSSmin 0.75 · typ 2.5 V4
Input voltageSCL, SDA, A0, A1, DRDY; 3.0 V ≤ DVDD ≤ 5.5 V; min DGNDmax 5.5 V4
Operating ambient temperature TAmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATSSOP (PW), 16 PINStyp 90.3 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)TSSOP (PW), 16 PINStyp 31.7 °C/W5
Junction-to-board thermal resistance RθJBTSSOP (PW), 16 PINStyp 41.8 °C/W5
Junction-to-top characterization parameter ψJTTSSOP (PW), 16 PINStyp 1.8 °C/W5
Junction-to-board characterization parameter ψJBTSSOP (PW), 16 PINStyp 41.2 °C/W5
Absolute input currentPGA disabled, gain = 1 to 4, normal mode, VIN = 0 V; typical ±5 nAtyp 5 nA5
Absolute input currentPGA disabled, gain = 1 to 4, turbo mode, VIN = 0 V; typical ±10 nAtyp 10 nA5
Absolute input currentGain = 1 to 128, VIN = 0 V; typical ±1 nAtyp 1 nA5
Absolute input current driftPGA disabled, gain = 1 to 4, VIN = 0 Vtyp 10 pA/°C5
Absolute input current driftGain = 1 to 128, VIN = 0 Vtyp 5 pA/°C5
Differential input currentPGA disabled, gain = 1 to 4, normal mode; VCM = AVDD / 2, –VREF / Gain ≤ VIN ≤ VREF / Gain; typical ±5 nAtyp 5 nA5
Differential input currentPGA disabled, gain = 1 to 4, turbo mode; VCM = AVDD / 2, –VREF / Gain ≤ VIN ≤ VREF / Gain; typical ±10 nAtyp 10 nA5
Differential input currentGain = 1 to 128; VCM = AVDD / 2, –VREF / Gain ≤ VIN ≤ VREF / Gain; typical ±1 nAtyp 1 nA5
Differential input current driftPGA disabled, gain = 1 to 4; VCM = AVDD / 2, –VREF / Gain ≤ VIN ≤ VREF / Gaintyp 10 pA/°C5
Resolution (no missing codes)min 24 Bits5
Noise (input-referred)Normal mode, gain = 128, DR = 20 SPStyp 110 nVRMS5
Integral nonlinearity INLAVDD = 3.3 V, gain = 1 to 128, VCM = AVDD / 2, external VREF, normal mode, best fit; typical ±6min -15 · typ 6 · max 15 ppmFSR5
Input offset voltage VIOPGA disabled, gain = 1 to 4, differential inputs; typical ±4 uVtyp 4 uV5
Input offset voltage VIOGain = 1, differential inputs, TA = 25°C; typical ±5 uVmin -150 · typ 5 · max 150 uV5
Input offset voltage VIOGain = 2 to 128, differential inputs; typical ±4 uVtyp 4 uV5
Offset drift vs temperaturePGA disabled, gain = 1 to 4typ 0.02 uV/°C5
Offset drift vs temperatureGain = 1 to 128typ 0.1 · max 0.6 uV/°C5
Gain errorPGA disabled, gain = 1 to 4; excluding error of voltage reference; typical ±0.01%typ 0.01 %5
Gain errorGain = 1 to 32, TA = 25°C; excluding error of voltage reference; typical ±0.01%min -0.05 · typ 0.01 · max 0.05 %5
Gain errorGain = 64 to 128, TA = 25°C; excluding error of voltage reference; typical ±0.015%min -0.1 · typ 0.015 · max 0.1 %5
Gain drift vs temperaturePGA disabled, gain = 1 to 4; excluding error of voltage referencetyp 0.5 ppm/°C5
Gain drift vs temperatureGain = 1 to 32; excluding error of voltage referencetyp 0.5 · max 2 ppm/°C5
Gain drift vs temperatureGain = 64 to 128; excluding error of voltage referencetyp 1 · max 4 ppm/°C5
Normal-mode rejection ratio NMRR50 Hz ±1 Hz, DR = 20 SPSmin 78 · typ 88 dB6
Normal-mode rejection ratio NMRR60 Hz ±1 Hz, DR = 20 SPSmin 80 · typ 88 dB6
Common-mode rejection ratio CMRRAt dc, gain = 1, AVDD = 3.3 Vmin 90 · typ 105 dB6
Common-mode rejection ratio CMRRfCM = 50 Hz or 60 Hz, DR = 20 SPS, AVDD = 3.3 Vmin 105 · typ 115 dB6
Common-mode rejection ratio CMRRfCM = 50 Hz or 60 Hz, DR = 2 kSPS, AVDD = 3.3 Vmin 95 · typ 110 dB6
Power-supply rejection ratio PSRRAVDD at dc, VCM = AVDD / 2min 85 · typ 105 dB6
Power-supply rejection ratio PSRRDVDD at dc, VCM = AVDD / 2min 95 · typ 115 dB6
Reference voltage VREFInternal voltage referencetyp 2.048 V6
AccuracyInternal voltage reference; TA = 25°C, TSSOP package; typical ±0.01%min -0.15 · typ 0.01 · max 0.15 %6
Temperature driftInternal voltage referencetyp 5 · max 30 ppm/°C6
Long-term driftInternal voltage reference; 1000 hourstyp 110 ppm6
Reference input currentREFP = VREF, REFN = AVSS, AVDD = 3.3 V; typical ±10 nAtyp 10 nA6
Frequency fCLKInternal oscillator; normal modetyp 1.024 MHz6
Frequency fCLKInternal oscillator; turbo modetyp 2.048 MHz6
AccuracyInternal oscillator; normal mode; typical ±1%min -2 · typ 1 · max 2 %6
AccuracyInternal oscillator; turbo mode; typical ±2%min -4 · typ 2 · max 4 %6
Accuracy (each IDAC)AVDD = 3.3 V to 5.5 V; IDAC = 50 uA to 1.5 mA; typical ±1%min -6 · typ 1 · max 6 %6
Current matching between IDACsAVDD = 3.3 V to 5.5 V; IDAC = 50 uA to 1.5 mA, TA = 25°Ctyp 0.3 · max 2 %6
Temperature drift (each IDAC)AVDD = 3.3 V to 5.5 V; IDAC = 50 uA to 1.5 mAtyp 50 ppm/°C6
Temperature drift matching between IDACsAVDD = 3.3 V to 5.5 V; IDAC = 50 uA to 1.5 mAtyp 8 · max 40 ppm/°C6
MagnitudeBurn-out current sources; sink and sourcetyp 10 uA6
AccuracyBurn-out current sources; typical ±5%typ 5 %6
Conversion resolutionTemperature sensortyp 14 Bits6
Temperature resolutionTemperature sensortyp 0.03125 °C6
AccuracyTemperature sensor; TA = 0°C to +85°C; typical ±0.25°Cmin -1 · typ 0.25 · max 1 °C6
AccuracyTemperature sensor; TA = –40°C to +125°C; typical ±0.5°Cmin -1.5 · typ 0.5 · max 1.5 °C6
Accuracy vs analog supply voltageTemperature sensortyp 0.0625 · max 0.25 °C/V6
Logic input level, high VIH3.0 V ≤ DVDD ≤ 5.5 V; SCL, SDA, A0, A1, DRDY; min 0.7 DVDDmax 5.5 V7
Logic output level, low VOLIOL = 3 mA; min DGNDtyp 0.15 · max 0.4 V7
Low-level output current IOLVOL = 0.4 V, standard-mode, fast-modemin 3 mA7
Low-level output current IOLVOL = 0.4 V, fast-mode plusmin 20 mA7
Low-level output current IOLVOL = 0.6 V, fast-modemin 6 mA7
Input current IiDGND + 0.1 V < VDigital Input < DVDD – 0.1 Vmin -10 · max 10 uA7
Capacitance CiEach pinmax 10 pF7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; power-down modetyp 0.1 · max 3 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; normal mode, PGA disabled, gain = 1 to 4typ 250 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; normal mode, gain = 1 to 16typ 360 · max 510 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; normal mode, gain = 32typ 455 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; normal mode, gain = 64, 128typ 550 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; turbo mode, PGA disabled, gain = 1 to 4typ 370 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; turbo mode, gain = 1 to 16typ 580 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; turbo mode, gain = 32typ 765 uA7
Analog supply current IAVDDAVDD = 3.3 V, VIN = 0 V, IDACs turned off; turbo mode, gain = 64, 128typ 955 uA7
Analog supply current IAVDDAdditional analog supply current per function; AVDD = 3.3 V; external reference selectedtyp 60 uA7
Analog supply current IAVDDAdditional analog supply current per function; AVDD = 3.3 V; IDAC overhead (excludes the actual IDAC current)typ 195 uA7
Digital supply current IDVDDDVDD = 3.3 V, all data rates, I2C not active; power-down modetyp 0.3 · max 5 uA7
Digital supply current IDVDDDVDD = 3.3 V, all data rates, I2C not active; normal modetyp 65 · max 100 uA7
Digital supply current IDVDDDVDD = 3.3 V, all data rates, I2C not active; turbo modetyp 100 uA7
Power dissipation PDAVDD = DVDD = 3.3 V, all data rates, VIN = 0 V, I2C not active; normal mode, gain = 1 to 16typ 1.4 mW7
Power dissipation PDAVDD = DVDD = 3.3 V, all data rates, VIN = 0 V, I2C not active; turbo mode, gain = 1 to 16typ 2.2 mW7

Pins, by the datasheet

16
1 A0
I2C slave address select pin 0. · p. 3
2 A1
I2C slave address select pin 1. · p. 3
3 RESET
Reset, active low. · p. 3
4 DGND
Digital ground. · p. 3
5 AVSS
Negative analog power supply. · p. 3
6 AIN3
Analog input 3. · p. 3
7 AIN2
Analog input 2. · p. 3
8 REFN
Negative reference input. · p. 3
9 REFP
Positive reference input. · p. 3
10 AIN1
Analog input 1. · p. 3
11 AIN0
Analog input 0. · p. 3
12 AVDD
Positive analog power supply; connect a 100-nF or larger capacitor to AVSS. · p. 3
13 DVDD
Positive digital power supply; connect a 100-nF or larger capacitor to DGND. · p. 3
14 DRDY
Data ready, active low; connect to DVDD using a pullup resistor. · p. 3
15 SDA
Serial data input and output; connect to DVDD using a pullup resistor. · p. 3
16 SCL
Serial clock input; connect to DVDD using a pullup resistor. · p. 3

Open-source boards using it

8
  • 4 layers84.5 × 53.1 mmPinaBio Paca v2.0, the printed circuit board in 3D

    PinaBio Paca v2.0

    AlejandroPina/PinaBio-Paca-v2.0-beta

    PinaBio Paca v2.0 beta

    89 parts
  • 6 layers140 × 56 mmTrenz mounted, the printed circuit board in 3D

    Trenz mounted

    naturalhazardscience/groundlark

    Open source hardware for community-powered citizen science

    207 partsMIT
  • 2 layers40.3 × 19.5 mmADS122C04, the printed circuit board in 3D

    ADS122C04

    shivamsharma2195/PCB-Design

    PCB Designs in Kikad

    29 parts
  • 4 layers70.1 × 71 mmMixed signal board, the printed circuit board in 3D

    Mixed signal board

    YJM00/Mixed-Signal-Board-PI-SI-PCB-

    즉, 이 프로젝트는 단순 회로 작성이 아니라 System-level Requirement를 기반으로 실제 제작 가능한 형태의 STM32 Mixed-Signal 보드를 설계한 HW 설계 프로젝트입니다.

    188 parts
  • 2 layers30 × 34 mm6wire, the printed circuit board in 3D

    6wire

    dragonlock2/kicadboards

    Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

    58 parts14Apache-2.0
  • 4 layers130 × 110 mmBase1x, the printed circuit board in 3D

    Base1x

    greyltc/hardware

    Hardware disign files, for use with the KiCAD EDA

    87 parts
  • 2 layers100 × 96 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    7 parts
  • 2 layers96 × 22 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    11 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADS122C04IPW?

Yes. The symbol is SparkFun-IC-Conversion:ADS122C04IPWR and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS122C04IPW?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the ADS122C04IPW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS122C04IPW?

JLCPCB lists it as part C2872338, with 3,959 in stock; the sellers' links on this page open their listings.

What can replace the ADS122C04IPW?

Parts like it in the library: the ADS112C04IPW by Texas Instruments, the ADS1219IPW by Texas Instruments, the AD7766BRUZ-RL7 by Analog Devices and the AD7767BRUZ-1-RL7 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADS122C04IPW?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.