4 layers90.2 × 95.9 mm
ADCS board
onionharvester/boardwalk
A little gathering place for my PCBs. This is their favourite hangout spot! 🪼⋆.ೃ࿔*:･
205 parts55
Overview
The ADS7830IPW is an analog To Digital Converter made by Texas Instruments in a TSSOP-16 package with 16 pins. -40℃~+125℃ 0.5LSB 2.7V~5V 3.4MHz 4 40ppm/℃ 50dB 70kHz 70uA 8 Built-in Built-in I2C SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog_DAC:ADS7830, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 5,228 are in stock at JLCPCB (part C161747). 14 open-source boards in 13 repositories on GitHub use it.
Symbol
Footprint
Parameters
17- ADC architecture
- SAR
- Clock Frequency
- 3.4MHz
- Clock/Oscillator
- Built-in
- DNL (LSB)
- 0.1LSB
- Features
- Multiplexers
- Integral non - linearity
- 0.5LSB
- Interface
- I2C
- Operating Temperature
- -40℃~+125℃
- Programmable Gain
- Not supported
- Quiescent Current (Iq)
- 70uA
- Resolution (Bits)
- 8
- Sampling Rate
- 70kHz
- Signal-to-Noise Ratio
- 50dB
- Voltage - Supply
- 2.7V~5.25V
- Voltage Reference
- Built-in
- differential input
- Yes
- number of channels
- 4
Order codes
4- ADS7830IPWTLCSC C128355
- ADS7830IPWRLCSC C161747
- ADS7830IPWTG4LCSC C17403314
- ADS7830IPWRG4LCSC C2670218
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | CH0 | Input |
| 2 | CH1 | Input |
| 3 | CH2 | Input |
| 4 | CH3 | Input |
| 5 | CH4 | Input |
| 6 | CH5 | Input |
| 7 | CH6 | Input |
| 8 | CH7 | Input |
| 9 | GND | Power in |
| 10 | REFin/REFout | Input/output |
| 11 | COM | Input |
| 12 | A0 | Input |
| 13 | A1 | Input |
| 14 | SCL | Input |
| 15 | SDA | Input/output |
| 16 | VDD | Power in |
Open-source boards using it
All 14- 2 layers80 × 95 mm
RICM Greenpower Telemetry Module
ricomputermuseum/RICM_greenpower_telemetry
A Raspberry Pi Pico (or Pico W) based telemetry system
57 parts2 - 4 layers267.1 × 198.7 mm
MCR prototype PCB
alanswx/Arcade-MCR2-TangFPGA
Standalone port of the Bally Midway MCR arcade families for Sipeed Tang FPGA boards — no MiSTer/HPS required. MCR-2 (Tron, Domino Man, Satan's Hollow, Wacko, Kozmik Kroozr, Two Tigers), MCR-3/91490 (Tapper —…
147 parts - 2 layers170 × 55 mm
PTuP 2026 displayLCD 8Zonas 4Salidas
edgranzella/PTuP_2026_displayLCD_8Zonas_4Salidas
Este repositorio contiene el diseño electrónico y ruteado de PCB avanzado desarrollado en KiCad para el módulo PTuP 2026.
100 parts - 2 layers172 × 99 mm
- 4 layers90.2 × 95.9 mm
ADCS board
pete4radio/SAMWISE-1-2-HW-Training
SAMWISE boards existing or newly ordered March 2025
197 parts - 2 layers337 × 195.6 mm
- 2 layers
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/ADS7830IPW" title="ADS7830IPW in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/ADS7830IPW.jpg" alt="ADS7830IPW" width="1200" height="900">[](https://pcbkit.io/parts/ti/ADS7830IPW)Questions
Is there a KiCad symbol and footprint for the ADS7830IPW?
Yes. The symbol is Analog_DAC:ADS7830 and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS7830IPW?
TSSOP-16, with 16 pins. Its footprint is drawn on this page.
Where is the ADS7830IPW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADS7830IPW?
JLCPCB lists it as part C161747, with 5,228 in stock; the sellers' links on this page open their listings.
What can replace the ADS7830IPW?
Parts like it in the library: the ADS7828EB/2K5 by Texas Instruments, the ADS7828E/2K5 by Texas Instruments, the ADS7828EB/250 by Texas Instruments and the AD7994BRUZ-1 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADS7830IPW?
14 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
ADS7828EB/2K5
TSSOP-16-40℃~+85℃ 12 15ppm/℃ 1LSB 2.7V~5V 3.4MHz 400nA 50kHz 72dB 8 Built-in Built-in I2C SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS7828E/2K5
TSSOP-16-40℃~+85℃ 12 1LSB 2.7V~5V 2LSB 3.4MHz 400nA 50kHz 72dB 8 Built-in External、Built-in I2C Multiplexers Not supported SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS7828EB/250
TSSOP-16-40℃~+85℃ 12 15ppm/℃ 1LSB 2.7V~5V 3.4MHz 400uA 50kHz 72dB 8 Built-in Built-in I2C Not supported SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)AD7994BRUZ-1
TSSOP-16-40℃~+125℃ 12 188kHz 1LSB 1uA 2.7V~5.5V 3.4MHz 4 71dB Built-in External I2C Multiplexers、Synchronous triggering No TSSOP-16 Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)ADS7828EIPWRQ1
TSSOP-16-40℃~+85℃ 12 15ppm/℃ 1LSB 2.7V~5.25V 3.4MHz 50kHz 72dB 8 850uA Built-in Built-in I2C SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS7828E/250
TSSOP-16-40℃~+85℃ 12 15ppm/℃ 2.7V~5V 225uA 2LSB 3.4MHz 50kHz 72dB 8 Built-in Built-in I2C SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)AD7994BRUZ-1REEL
TSSOP-16-40℃~+125℃ 12 188kHz 1LSB 1uA 2.7V~5.5V 3.4MHz 4 71dB Built-in External I2C Multiplexers、Synchronous triggering No SAR TSSOP-16 Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)
ADS7866IDBV
SOT-23-6-40℃~+85℃ 1 1.2V~3.6V 1.5LSB 12 200kHz 3.4MHz 385uA 71dB Built-in External No Not supported SAR SPI Synchronous triggering SOT-23-6 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)