Skip to the content
12345

TLV70433DBVR

TECH PUBLICExtended

-40℃~+85℃@(Ta) 1 150mA 2.5uA 24V 3.3V 330mV@(100mA) 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
tech-public/TLV70433DBVR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
21 at JLCPCB (C23380900)
Used on
10 open-source boards

Overview

The TLV70433DBVR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by TECH PUBLIC in a SOT-23-5 package with 5 pins. -40℃~+85℃@(Ta) 1 150mA 2.5uA 24V 3.3V 330mV@(100mA) 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 21 are in stock at JLCPCB (part C23380900). 10 open-source boards in 9 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

2
Output
3.3 V · VOUT, fixed nominal output · p. 1
Gives
150 mA · VOUT, rated continuous output · p. 1

What it is and has

4
Regulator
Ultra low power consumption, high-voltage linear regulator · p. 1
Output accuracy
±2% · p. 1
Protection
Current limit · p. 1
Package
SOT23-5 · p. 1

Around it

1
cap 1.0 µF
between VIN and GND; Tantalum; typical application circuit · p. 2

Specifications

6
ParameterConditionsAs printedPage
ESDHBM mode, ESDA/JEDECJS-001-2017min 2000 V2
DC Output Voltage AccuracyIOUT = 0.1mAmin -2 · max 2 %3
Line Regulation ΔLINEIOUT = 1mA, 10≤VIN≤18Vtyp 0.3 %3
Load Regulation ΔLOAD10mA≤IOUT≤100mAtyp 0.3 %3
Power Supply Rejection Ratio PSRRVOUT = 5V, IOUT = 30mA, VIN = 12V, f = 1kHztyp 70 dB3
Thermal Shutdown Temperature TSDIOUT = 10mAtyp 160 °C3

Pins, by the datasheet

5
1 GND
Ground · p. 1
2 VIN
Input of Supply Voltage · p. 2
3 VOUT
Output of the Regulator · p. 1
4 NC
NO Connected · p. 1
5 NC
NO Connected · p. 1

Ordering codes, by the datasheet

2
TLV70433DBVR
SOT23-5 · 3.3 V output; tape and reel; marking PAO · p. 1
TLV70450DBVR
SOT23-5 · 5.0 V output; marking PAX · p. 1

Open-source boards using it

10See all 10
  • 6 layers81.5 × 50 mmPicard, the printed circuit board in 3D

    Picard

    weiiwang01/picard

    PiCard is a miniaturized Raspberry Pi Compute Module carrier board optimized for Linux server use cases.

    166 parts8
  • 4 layers90 × 60 mmPowerbank, the printed circuit board in 3D

    Powerbank

    oskarengdahl/Powerbank-MPD-XP

    A powerbank to primarily use with MDP-XP Modular Power Supply

    167 parts5
  • 2 layers160 × 55 mmNitrogenGenerator, the printed circuit board in 3D

    NitrogenGenerator

    tinic/NitrogenGenerator

    DIY membrane nitrogen generator for home brewing nitro cold brew and beer. 50L/h output at 99.5%+ purity, 100 PSI, ~$2,200 build. Includes KiCad PCB, STM32 firmware, SolidWorks CAD, and full P&ID.

    30 parts3
  • 4 layers103.1 × 71.1 mmBms, the printed circuit board in 3D

    Bms

    membaye/bms

    BMS V1

    236 parts1
  • 2 layers95 × 40.6 mmCSPS, the printed circuit board in 3D

    CSPS

    paulc/csps-pcb

    CSPS PCB (KiCAD)

    41 parts
  • 4 layers95 × 75 mmSolPwr, the printed circuit board in 3D

    SolPwr

    Shadowmix11006/SolPwr

    A 3S power bank with a solar panel

    136 parts
  • 2 layers95.9 × 27.8 mmOpsx x, the printed circuit board in 3D

    Opsx x

    ZeshuLiu/SX-70-Mk2

    把板子上的U+ U- GND VCC焊到usb线上,连接电脑后可以当作树莓派Pico开发板进行操作,上传代码的参见这里(树莓派官网)。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器(文件夹不需要),并且将gmain.py命名为…

    62 parts2GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV70433DBVR?

Yes. the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV70433DBVR?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV70433DBVR datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the TLV70433DBVR?

JLCPCB lists it as part C23380900, with 21 in stock; the sellers' links on this page open their listings.

What can replace the TLV70433DBVR?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV70433DBVR?

10 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.