

Projeto 2 Microcontrolador ponteH
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 35
- Pads
- 145
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Mar 2026
- Updated
- 26 May 2026
Overview
Projeto 2 Microcontrolador ponteH is an open-source printed circuit board by EngAdriano, from the EngAdriano/estudo_KiCad repository on GitHub. It is a 2-layer board with 52 parts on 35 nets.
It is built around the STM32G031F6P6, PT2466 and TLV70433DBVR, with the CC0603KRX7R9BB104, RC0603FR-0710KL and TS-1003S-07026 among its other parts. Its parts include 15 resistors, 12 capacitors, 4 diodes, 4 switches and 3 ICs. It belongs with the STM32 boards of this library.
Main components
12STM32G031F6P6
TSSOP-20-40℃~+85℃ 1.7V~3.6V 12bit 18 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)PT2466
SOP-8-40℃~+85℃ 1.8A 1.8V~5V 1.9A 280mΩ 2nA SOP-8 Brushed DC Motor Drivers ROHSPTCBrushed DC Motor DriversTLV70433DBVR
SOT-23-5-40℃~+85℃@(Ta) 1 150mA 2.5uA 24V 3.3V 330mV@(100mA) 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTRC0603FR-0710KL
UncategorisedUnknown makerTS-1003S-07026
SMD-4P,12x12mm100,000 cycles 12V 12mm 12mm 2.6N 50mA 7mm Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,12x12mm Tactile Switches ROHSXUNPUTactile SwitchesRC0603FR-07330RL
UncategorisedUnknown makerRVT1E101M0607
SMD,D6.3xL7.7mm-40℃~+105℃ 100uF 2000hrs@105℃ 25V 6.3mm 7.7mm 93mA@120Hz ±20% SMD,D6.3xL7.7mm Aluminum Electrolytic Capacitors - SMD ROHSROQANGAluminum Electrolytic Capacitors - SMDAVR-M2012C120MT6AB
080512V 1nF@1kHz 200mJ 20V 60A 7.5V 0805 Varistors ROHSTDKVaristorsRC0603FR-071KL
UncategorisedUnknown makerPZ254V-11-05P
插件,P=2.54mm-40℃~+105℃ 1 1x5P 2.54mm 2.5mm 250V 3A 3mm 5P 6.1mm Black Brass Gold Square pin Through Hole Plugin,P=2.54mm Pin Headers ROHSXFCNPin HeadersDB2ERM-3.81-2P-GN
弯插,P=3.81mm-40℃~+105℃ 1 1x2P 2 2P 3.81mm 300V 8A Board Side/Socket - Closed Green Right-Angle Screw Push-Pull,P=3.81mm Pluggable System Terminal Block ROHSDORABOPluggable System Terminal Block
README
README.mdestudo_KiCad
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C6, C7, C8, C9, C10, C11 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9, R10, R11, R12, R13 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx85PSMTR | SW1, SW2, SW3, SW4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | Green | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 100u 25V | Capacitor_SMD:CP_Elec_6.3x7.7 | C12 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 12V | Inductor_SMD:L_0805_2012Metric | RV1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | DB2ERM-3.81-2P-GN | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-GF-3.81_1x02_P3.81mm_Horizontal_ThreadedFlange_MountHole | J3 |
| 1 | DC-005-5A-2.0 | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | MRA4007T3G | Diode_SMD:D_SMA | D1 |
| 1 | PT2466 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U3 |
| 1 | PTF-15 | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | STM32G031F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | TLV70433DBVR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
More from EngAdriano/estudo_KiCad
1- 2 layers35 × 50 mm

Similar boards
- 2 layers65 × 54 mm

Coffeecaller
tiacsys/ecad-coffeecaller
CoffeeCaller. Once a nice office gadget it now evolved to a small development board for the Nordic nRF52840.
85 parts14CERN-OHL-S-2.0 - 2 layers

Esp32industrial
Karma7272-cmd/ESP-32-kicad-design
A collection of my electronics circuits, PCB designs, and hardware projects in a single repository.
28 parts - 6 layers70 × 81 mm

T1s panel
hwkim3330/sfp-auto-ethernet
SFP modules that speak SGMII to the host and 100/1000BASE-T1, 1000BASE-T or 10BASE-T1S to the world (KiCad)
606 parts - 4 layers76.2 × 89.1 mm

Epc gain link
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
34 parts3 - 6 layers203 × 151.8 mm

PDNode Baseboard
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
236 parts86AGPL-3.0 - 2 layers54 × 52 mm

PDX Hackerspace Exit Poll
romkey/pdxhackerspace-exit-poll
ESPHome/Home Assistant-based exit dashboard used at PDX Hackerspace
19 parts1MIT - 2 layers82.5 × 85.3 mm

- 4 layers61.8 × 79.6 mm

Questions
What parts does the Projeto 2 Microcontrolador ponteH use?
52 parts, built around the STM32G031F6P6, PT2466, TLV70433DBVR and CC0603KRX7R9BB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Projeto 2 Microcontrolador ponteH KiCad files?
From the EngAdriano/estudo_KiCad repository on GitHub, at the commit this page was made from: the board is Projeto_2_Microcontrolador_ponteH/Projeto_2_Microcontrolador_ponteH.kicad_pcb and its schematic Projeto_2_Microcontrolador_ponteH/Projeto_2_Microcontrolador_ponteH.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Projeto 2 Microcontrolador ponteH design in my own project?
Its repository states no licence, so its author keeps all rights: ask EngAdriano before reusing the design.