
Micromouse
UBIEEE/FrankenMouse
FrankenMouse is a MicroMouse robot that was designed, built, and programmed from scratch by members of the University at Buffalo's IEEE Student Branch.
STMicroelectronicsExtended
UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32WB55CGU6 is a RF Transceiver IC made by STMicroelectronics in a UFQFPN-48(7x7) package with 49 pins. UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32WB:STM32WB55CGUx, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, from KiCad's library), ready for a KiCad board. 12 are in stock at JLCPCB (part C404023). 10 open-source boards in 8 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDDX - VSS | including VDD, VDDA, VDDUSB, VLCD, VDDRF, VDDSMPS, VBAT, VREF+ | min -0.3 · max 4 V | 85 |
| Input voltage on TT_xx pins VIN | Minimum: VSS-0.3 | max 4 V | 85 |
| Input voltage on any other pin VIN | Minimum: VSS-0.3 | max 4 V | 85 |
| Variations between different VDDX power pins of the same domain |∆VDDx| | max 50 mV | 85 | |
| Variations between all the different ground pins |VSSx-VSS| | Includes VREF- pin | max 50 mV | 85 |
| Allowed voltage difference for VREF+ > VDDA VREF+ - VDDA | max 0.4 V | 85 | |
| Total current into sum of all VDD power lines (source) ∑IVDD | max 130 mA | 85 | |
| Total current out of sum of all VSS ground lines (sink) ∑IVSS | max 130 mA | 85 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 85 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max 100 mA | 85 | |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | max 20 mA | 85 | |
| Output current sunk by any FT_f pin IIO(PIN) | max 20 mA | 85 | |
| Output current sourced by any I/O and control pin IIO(PIN) | max 20 mA | 85 | |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | max 100 mA | 85 | |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | max 100 mA | 85 | |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | Absolute sum of negative injected currents | max 25 mA | 85 |
| Storage temperature range TSTG | min -65 · max 150 °C | 86 | |
| Maximum junction temperature TJ | max 130 °C | 86 | |
| Core current consumption ICORE | VBAT = 1.8 V, VDD = 0 V | typ 0.002 uA | 87 |
| Core current consumption ICORE | Shutdown, VDD = 1.8 V | typ 0.013 uA | 87 |
| Core current consumption ICORE | Standby, VDD = 1.8 V, 32 Kbytes RAM retention | typ 0.32 uA | 87 |
| Core current consumption ICORE | Stop2 | typ 1.85 uA | 87 |
| Core current consumption ICORE | Sleep, 16 MHz | typ 740 uA | 87 |
| Core current consumption ICORE | LP run, 2 MHz | typ 320 uA | 87 |
| Core current consumption ICORE | Run, 64 MHz | typ 5000 uA | 87 |
| Peripheral current consumption IPERI | Bluetooth Low Energy, Radio RX; includes RF subsystem and digital processing | typ 4500 uA | 87 |
| Peripheral current consumption IPERI | Bluetooth Low Energy, Radio TX, 0 dBm output power; includes RF subsystem and digital processing | typ 5200 uA | 87 |
| Peripheral current consumption IPERI | Bluetooth Low Energy, advertising with Stop 2, Tx = 0 dBm, period 1.28 s, 31 bytes, 3 channels; averaged over 100 s | typ 13 uA | 87 |
| Peripheral current consumption IPERI | LP timers | typ 6 uA | 87 |
| Peripheral current consumption IPERI | I2C3 | typ 7.1 uA | 87 |
| Peripheral current consumption IPERI | LPUART | typ 7.7 uA | 87 |
| Peripheral current consumption IPERI | RTC | typ 2.5 uA | 87 |
| Internal AHB clock frequency fHCLK | min 0 · max 64 MHz | 87 | |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 64 MHz | 87 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 64 MHz | 87 | |
| Standard operating voltage VDD | min 1.71 · max 3.6 V | 87 | |
| Analog supply voltage VDDA | ADC or COMP used; maximum 3.6 V is on a separate line | min 1.62 V | 87 |
| Analog supply voltage VDDA | VREFBUF used; maximum 3.6 V is on a separate line | min 2.4 V | 87 |
| Analog supply voltage VDDA | ADC, COMP, VREFBUF not used; minimum 1.71 V is on a separate line | max 3.6 V | 87 |
| Backup operating voltage VBAT | min 1.55 · max 3.6 V | 87 | |
| SMPS Feedback voltage VFBSMPS | min 1.4 · max 3.6 V | 88 | |
| Minimum RF voltage VDDRF | min 1.71 · max 3.6 V | 88 | |
| USB supply voltage VDDUSB | USB used | min 3 · max 3.6 V | 88 |
| USB supply voltage VDDUSB | USB not used | min 0 · max 3.6 V | 88 |
| I/O input voltage VIN | TT_xx I/O; maximum VDD + 0.3 V | min -0.3 V | 88 |
| I/O input voltage VIN | All I/O except TT_xx; maximum min (min (VDD, VDDA, VDDUSB, VLCD) + 3.6 V, 5.5 V) | min -0.3 V | 88 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | UFQFPN48; suffix 6, TA = 85 °C | max 803 mW | 88 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation; minimum –40 °C is on a separate line | max 85 °C | 88 |
| Ambient temperature for the suffix 6 version TA | Low-power dissipation; minimum –40 °C is on a separate line; TJ must not exceed TJmax | max 105 °C | 88 |
| Junction temperature range TJ | Suffix 6 version; minimum –40 °C is on a separate line | max 105 °C | 88 |
| Frequency operating range Fop | 1 Mbps unless otherwise specified | min 2402 · max 2480 MHz | 88 |
| Crystal frequency Fxtal | typ 32 MHz | 88 | |
| Delta frequency ∆F | typ 250 kHz | 88 | |
| Intermodulation P_IMD | |f2-f1| = 6 MHz; Bluetooth Low Energy: -50 dBm | typ -29 dBm | 93 |
| Intermodulation P_IMD | |f2-f1| = 8 MHz; Bluetooth Low Energy: -50 dBm | typ -30 dBm | 93 |
| Intermodulation P_IMD | |f2-f1| = 10 MHz; Bluetooth Low Energy: -50 dBm | typ -29 dBm | 93 |
| Out of band blocking P_OBB | 30 to 2000 MHz; Bluetooth Low Energy: -30 dBm | typ -3 dBm | 93 |
| Out of band blocking P_OBB | 2003 to 2399 MHz; Bluetooth Low Energy: -35 dBm | typ -9 dBm | 93 |
| Out of band blocking P_OBB | 2484 to 2997 MHz; Bluetooth Low Energy: -35 dBm | typ -3 dBm | 93 |
| TX maximum output power consumption (SMPS Bypass) Itxmax | Includes RF subsystem and digital processing | typ 12.7 mA | 93 |
| TX maximum output power consumption (SMPS On, VFBSMPS = 1.7 V) Itxmax | Includes RF subsystem and digital processing | typ 7.8 mA | 93 |
| TX 0 dBm output power consumption (SMPS Bypass) Itx0dbm | Includes RF subsystem and digital processing | typ 8.8 mA | 93 |
| TX 0 dBm output power consumption (SMPS On, VFBSMPS = 1.4 V) Itx0dbm | Includes RF subsystem and digital processing | typ 5.2 mA | 93 |
| Rx consumption (SMPS Bypass) Irxlo | Includes RF subsystem and digital processing | typ 7.9 mA | 93 |
| Rx consumption (SMPS On, VFBSMPS = 1.4 V) Irxlo | Includes RF subsystem and digital processing | typ 4.5 mA | 93 |
| Frequency operating range Fop | min 2405 · max 2480 MHz | 93 | |
| Crystal frequency Fxtal | typ 32 MHz | 93 | |
| Delta frequency ∆F | typ 5 MHz | 93 | |
| On air data rate Roqpsk | typ 250 kbps | 93 | |
| RF channel spacing PLLres | typ 5 MHz | 93 | |
| TX maximum output power consumption (SMPS Bypass) Itxmax | Includes RF subsystem and digital processing | typ 11.7 mA | 95 |
| TX maximum output power consumption (SMPS On, VFBSMPS = 1.7 V) Itxmax | Includes RF subsystem and digital processing | typ 6.5 mA | 95 |
| TX 0 dBm output power consumption (SMPS Bypass) Itx0dbm | Includes RF subsystem and digital processing | typ 9.1 mA | 95 |
| TX 0 dBm output power consumption (SMPS On, VFBSMPS = 1.4 V) Itx0dbm | Includes RF subsystem and digital processing | typ 4.5 mA | 95 |
| Rx consumption (SMPS Bypass) Irxlo | Includes RF subsystem and digital processing | typ 9.2 mA | 95 |
| Rx consumption (SMPS On) Irxlo | Includes RF subsystem and digital processing | typ 4.5 mA | 95 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 25 °C | typ 1.9 · max 2.4 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 55 °C | typ 1.9 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 85 °C | typ 2 · max 2.52 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 105 °C | typ 2.2 · max 2.96 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 2 MHz, all peripherals disabled, 25 °C | typ 0.96 · max 1.25 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 2 MHz, all peripherals disabled, 55 °C | typ 0.985 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 2 MHz, all peripherals disabled, 85 °C | typ 1.1 · max 1.57 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 2, fHCLK = fHSI16 = 2 MHz, all peripherals disabled, 105 °C | typ 1.25 · max 2.05 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = 64 MHz, fHSI16 + PLL ON, all peripherals disabled, 25 °C | typ 8.15 · max 9.3 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = 64 MHz, fHSI16 + PLL ON, all peripherals disabled, 55 °C | typ 8.25 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = 64 MHz, fHSI16 + PLL ON, all peripherals disabled, 85 °C | typ 8.4 · max 9.6 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = 64 MHz, fHSI16 + PLL ON, all peripherals disabled, 105 °C | typ 8.6 · max 10.02 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSE = 32 MHz, all peripherals disabled, 25 °C | typ 4.2 · max 4.25 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSE = 32 MHz, all peripherals disabled, 55 °C | typ 4.25 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSE = 32 MHz, all peripherals disabled, 85 °C | typ 4.4 · max 4.63 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSE = 32 MHz, all peripherals disabled, 105 °C | typ 4.65 · max 5.17 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 25 °C | typ 2.25 · max 2.65 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 55 °C | typ 2.3 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 85 °C | typ 2.4 · max 2.91 mA | 100 |
| Supply current in Run mode IDD(Run) | Range 1, fHCLK = fHSI16 = 16 MHz, all peripherals disabled, 105 °C | typ 2.65 · max 3.52 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 64 MHz, all peripherals disabled, 25 °C | typ 5 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 64 MHz, all peripherals disabled, 55 °C | typ 5 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 64 MHz, all peripherals disabled, 85 °C | typ 5.1 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 64 MHz, all peripherals disabled, 105 °C | typ 5.2 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 32 MHz, all peripherals disabled, 25 °C | typ 3.15 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 32 MHz, all peripherals disabled, 55 °C | typ 3.15 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 32 MHz, all peripherals disabled, 85 °C | typ 3.25 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 32 MHz, all peripherals disabled, 105 °C | typ 3.35 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 16 MHz, all peripherals disabled, 25 °C | typ 2.3 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 16 MHz, all peripherals disabled, 55 °C | typ 2.3 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 16 MHz, all peripherals disabled, 85 °C | typ 2.35 mA | 100 |
| Supply current in Run mode IDD(Run) | SMPS, Range 1, fHCLK = 16 MHz, all peripherals disabled, 105 °C | typ 2.45 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 2 MHz, all peripherals disabled, 25 °C | typ 0.335 · max 0.48 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 2 MHz, all peripherals disabled, 55 °C | typ 0.36 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 2 MHz, all peripherals disabled, 85 °C | typ 0.47 · max 0.91 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 2 MHz, all peripherals disabled, 105 °C | typ 0.67 · max 1.47 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 1 MHz, all peripherals disabled, 25 °C | typ 0.17 · max 0.27 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 1 MHz, all peripherals disabled, 55 °C | typ 0.21 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 1 MHz, all peripherals disabled, 85 °C | typ 0.325 · max 0.73 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 1 MHz, all peripherals disabled, 105 °C | typ 0.52 · max 1.31 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 400 kHz, all peripherals disabled, 25 °C | typ 0.0815 · max 0.14 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 400 kHz, all peripherals disabled, 55 °C | typ 0.12 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 400 kHz, all peripherals disabled, 85 °C | typ 0.23 · max 0.59 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 400 kHz, all peripherals disabled, 105 °C | typ 0.425 · max 1.18 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 100 kHz, all peripherals disabled, 25 °C | typ 0.0415 · max 0.07 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 100 kHz, all peripherals disabled, 55 °C | typ 0.076 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 100 kHz, all peripherals disabled, 85 °C | typ 0.19 · max 0.55 mA | 100 |
| Supply current in Low-power run mode IDD(LPRun) | fHCLK = fMSI = 100 kHz, all peripherals disabled, 105 °C | typ 0.385 · max 1.14 mA | 100 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V, 0 °C | typ 0.039 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V, 25 °C | typ 0.013 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V, 40 °C | typ 0.03 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V, 55 °C | typ 0.1 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V, 85 °C | typ 0.635 · max 2.099 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 1.8 V, 105 °C | typ 1.95 · max 6.2 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V, 0 °C | typ 0.059 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V, 25 °C | typ 0.014 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V, 40 °C | typ 0.055 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V, 55 °C | typ 0.12 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V, 85 °C | typ 0.785 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 2.4 V, 105 °C | typ 2.35 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V, 0 °C | typ 0.064 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V, 25 °C | typ 0.037 · max 0.185 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V, 40 °C | typ 0.07 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V, 55 °C | typ 0.18 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V, 85 °C | typ 1 · max 2.67 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.0 V, 105 °C | typ 2.9 · max 7.49 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V, 0 °C | typ 0.071 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V, 25 °C | typ 0.093 · max 0.247 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V, 40 °C | typ 0.14 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V, 55 °C | typ 0.28 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V, 85 °C | typ 1.3 · max 3.12 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown) | VDD = 3.6 V, 105 °C | typ 3.7 · max 8.45 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V, 0 °C | typ 0.32 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V, 25 °C | typ 0.315 · max 0.572 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V, 40 °C | typ 0.355 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V, 55 °C | typ 0.42 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V, 85 °C | typ 0.985 · max 2.702 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V, 105 °C | typ 2.3 · max 6.18 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V, 0 °C | typ 0.425 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V, 25 °C | typ 0.405 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V, 40 °C | typ 0.46 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V, 55 °C | typ 0.54 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V, 85 °C | typ 1.2 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V, 105 °C | typ 2.8 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V, 0 °C | typ 0.535 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V, 25 °C | typ 0.535 · max 0.664 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V, 40 °C | typ 0.595 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V, 55 °C | typ 0.7 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V, 85 °C | typ 1.5 · max 2.99 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V, 105 °C | typ 3.45 · max 7.8 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V, 0 °C | typ 0.695 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V, 25 °C | typ 0.72 · max 0.79 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V, 40 °C | typ 0.79 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V, 55 °C | typ 0.94 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V, 85 °C | typ 2 · max 3.73 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V, 105 °C | typ 4.35 · max 9.14 uA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 1.8 V, 0 °C | typ 1 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 1.8 V, 25 °C | typ 2 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 1.8 V, 40 °C | typ 4 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 1.8 V, 55 °C | typ 10 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 1.8 V, 85 °C | typ 52 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 1.8 V, 105 °C | typ 145 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 2.4 V, 0 °C | typ 1 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 2.4 V, 25 °C | typ 2 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 2.4 V, 40 °C | typ 5 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 2.4 V, 55 °C | typ 12 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 2.4 V, 85 °C | typ 60 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 2.4 V, 105 °C | typ 165 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.0 V, 0 °C | typ 2 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.0 V, 25 °C | typ 4 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.0 V, 40 °C | typ 7 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.0 V, 55 °C | typ 16 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.0 V, 85 °C | typ 75 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.0 V, 105 °C | typ 225 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.6 V, 0 °C | typ 7 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.6 V, 25 °C | typ 15 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.6 V, 40 °C | typ 23 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.6 V, 55 °C | typ 42 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.6 V, 85 °C | typ 170 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled, VBAT = 3.6 V, 105 °C | typ 450 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 1.8 V, 0 °C | typ 295 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 1.8 V, 25 °C | typ 305 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 1.8 V, 40 °C | typ 315 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 1.8 V, 55 °C | typ 325 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 1.8 V, 85 °C | typ 380 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 1.8 V, 105 °C | typ 480 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 2.4 V, 0 °C | typ 385 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 2.4 V, 25 °C | typ 395 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 2.4 V, 40 °C | typ 400 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 2.4 V, 55 °C | typ 415 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 2.4 V, 85 °C | typ 475 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 2.4 V, 105 °C | typ 595 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.0 V, 0 °C | typ 495 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.0 V, 25 °C | typ 505 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.0 V, 40 °C | typ 515 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.0 V, 55 °C | typ 530 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.0 V, 85 °C | typ 600 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.0 V, 105 °C | typ 765 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.6 V, 0 °C | typ 630 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.6 V, 25 °C | typ 645 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.6 V, 40 °C | typ 660 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.6 V, 55 °C | typ 685 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.6 V, 85 °C | typ 830 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz, VBAT = 3.6 V, 105 °C | typ 1150 nA | 112 |
| Thermal resistance junction-ambient ΘJA | UFQFPN48 - 7 mm x 7 mm; stated value, no min/typ/max designation | typ 24.9 °C/W | 183 |
| Thermal resistance junction-board ΘJB | UFQFPN48 - 7 mm x 7 mm; stated value, no min/typ/max designation | typ 13 °C/W | 183 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 1.8 V; 0 °C | typ 0.27 · max 0.3 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 1.8 V; 25 °C | typ 0.32 · max 0.828 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 1.8 V; 40 °C | typ 0.515 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 1.8 V; 55 °C | typ 0.92 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 1.8 V; 85 °C | typ 3.45 · max 7.85 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 1.8 V; 105 °C | typ 8.2 · max 19.3 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 2.4 V; 0 °C | typ 0.27 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 2.4 V; 25 °C | typ 0.35 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 2.4 V; 40 °C | typ 0.54 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 2.4 V; 55 °C | typ 0.955 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 2.4 V; 85 °C | typ 3.5 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 2.4 V; 105 °C | typ 8.8 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.0 V; 0 °C | typ 0.27 · max 0.38 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.0 V; 25 °C | typ 0.37 · max 0.945 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.0 V; 40 °C | typ 0.575 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.0 V; 55 °C | typ 1 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.0 V; 85 °C | typ 3.85 · max 8.505 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.0 V; 105 °C | typ 9.5 · max 21.2 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.6 V; 0 °C | typ 0.3 · max 0.4 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.6 V; 25 °C | typ 0.41 · max 1.04 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.6 V; 40 °C | typ 0.645 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.6 V; 55 °C | typ 1.15 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.6 V; 85 °C | typ 4.2 · max 8.98 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; no independent watchdog; VDD = 3.6 V; 105 °C | typ 10.5 · max 22.4 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 2.4 V; 0 °C | typ 0.28 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 2.4 V; 25 °C | typ 0.595 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 2.4 V; 40 °C | typ 0.79 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 2.4 V; 55 °C | typ 1.2 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 2.4 V; 85 °C | typ 4 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 2.4 V; 105 °C | typ 9.05 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.0 V; 0 °C | typ 0.29 · max 0.73 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.0 V; 25 °C | typ 0.67 · max 1.253 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.0 V; 40 °C | typ 0.855 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.0 V; 55 °C | typ 1.35 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.0 V; 85 °C | typ 4.15 · max 8.774 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.0 V; 105 °C | typ 9.8 · max 21.4 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.6 V; 0 °C | typ 0.295 · max 0.851 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.6 V; 25 °C | typ 0.77 · max 1.356 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.6 V; 40 °C | typ 0.99 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.6 V; 55 °C | typ 1.5 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.6 V; 85 °C | typ 4.6 · max 9.36 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC disabled IDD (Standby) | Bluetooth Low Energy disabled; with independent watchdog; VDD = 3.6 V; 105 °C | typ 11 · max 22.84 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 0 °C | typ 0.5 · max 0.68 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 25 °C | typ 0.6 · max 1.165 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 40 °C | typ 0.78 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 55 °C | typ 1.2 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 85 °C | typ 3.7 · max 8.143 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 1.8 V; 105 °C | typ 8.45 · max 19.66 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 0 °C | typ 0.63 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 25 °C | typ 0.705 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 40 °C | typ 0.91 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 55 °C | typ 1.3 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 85 °C | typ 3.8 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 2.4 V; 105 °C | typ 9.1 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 0 °C | typ 0.725 · max 0.93 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 25 °C | typ 0.825 · max 1.463 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 40 °C | typ 1.05 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 55 °C | typ 1.5 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 85 °C | typ 3.95 · max 8.977 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; no independent watchdog; VDD = 3.0 V; 105 °C | typ 9.9 · max 21.44 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 0 °C | typ 0.565 · max 0.734 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 25 °C | typ 0.655 · max 1.196 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 40 °C | typ 0.83 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 55 °C | typ 1.25 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 85 °C | typ 3.75 · max 8.187 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 1.8 V; 105 °C | typ 8.55 · max 19.71 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 0 °C | typ 0.635 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 25 °C | typ 0.79 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 40 °C | typ 0.975 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 55 °C | typ 1.4 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 85 °C | typ 4.1 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 2.4 V; 105 °C | typ 9.2 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 0 °C | typ 0.725 · max 1.028 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 25 °C | typ 0.915 · max 1.573 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 40 °C | typ 1.1 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 55 °C | typ 1.55 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 85 °C | typ 4.5 · max 9.072 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.0 V; 105 °C | typ 10 · max 21.81 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 0 °C | typ 0.87 · max 1.144 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 25 °C | typ 1.05 · max 1.723 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 40 °C | typ 1.3 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 55 °C | typ 1.8 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 85 °C | typ 4.9 · max 9.73 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSI; with independent watchdog; VDD = 3.6 V; 105 °C | typ 11 · max 23.2 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 0 °C | typ 0.665 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °C | typ 0.755 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 40 °C | typ 0.96 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55 °C | typ 1.35 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85 °C | typ 4.05 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105 °C | typ 9.25 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 0 °C | typ 0.775 · max 0.6 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 25 °C | typ 0.88 · max 1.1 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 40 °C | typ 1.1 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 55 °C | typ 1.55 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 85 °C | typ 4.4 · max 8.719 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 105 °C | typ 10 · max 21.57 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 0 °C | typ 0.935 · max 0.75 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °C | typ 1.05 · max 1.171 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 40 °C | typ 1.3 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55 °C | typ 1.8 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85 °C | typ 5 · max 9.46 uA | 110 |
| Supply current in Standby mode (backup registers and SRAM2a retained), RTC enabled Bluetooth Low Energy disabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105 °C | typ 11 · max 23.03 uA | 110 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 0 °C | typ 0.16 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 25 °C | typ 0.21 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 40 °C | typ 0.38 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 55 °C | typ 0.66 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 85 °C | typ 2.3 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 1.8 V; 105 °C | typ 5.15 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 0 °C | typ 0.165 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 25 °C | typ 0.245 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 40 °C | typ 0.375 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 55 °C | typ 0.65 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 85 °C | typ 2.15 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 2.4 V; 105 °C | typ 5.2 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 0 °C | typ 0.155 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 25 °C | typ 0.25 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 40 °C | typ 0.385 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 55 °C | typ 0.63 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 85 °C | typ 2.25 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.0 V; 105 °C | typ 5.2 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 0 °C | typ 0.155 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 25 °C | typ 0.235 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 40 °C | typ 0.375 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 55 °C | typ 0.67 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 85 °C | typ 2.2 uA | 111 |
| Supply current to be subtracted in Standby mode when SRAM2a is not retained IDD (SRAM2a) | VDD = 3.6 V; 105 °C | typ 5.2 uA | 111 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 0 °C | typ 0.039 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 25 °C | typ 0.013 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 40 °C | typ 0.03 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 55 °C | typ 0.1 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 85 °C | typ 0.635 · max 2.099 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 105 °C | typ 1.95 · max 6.2 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 0 °C | typ 0.059 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 25 °C | typ 0.014 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 40 °C | typ 0.055 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 55 °C | typ 0.12 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 85 °C | typ 0.785 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 105 °C | typ 2.35 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.0 V; 0 °C | typ 0.064 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.0 V; 25 °C | typ 0.037 · max 0.185 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.0 V; 40 °C | typ 0.07 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.0 V; 55 °C | typ 0.18 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.0 V; 85 °C | typ 1 · max 2.67 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.0 V; 105 °C | typ 2.9 · max 7.49 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 0 °C | typ 0.071 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 25 °C | typ 0.093 · max 0.247 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 40 °C | typ 0.14 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 55 °C | typ 0.28 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 85 °C | typ 1.3 · max 3.12 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 105 °C | typ 3.7 · max 8.45 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 0 °C | typ 0.32 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25 °C | typ 0.315 · max 0.572 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 40 °C | typ 0.355 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55 °C | typ 0.42 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85 °C | typ 0.985 · max 2.702 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105 °C | typ 2.3 · max 6.18 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 0 °C | typ 0.425 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °C | typ 0.405 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 40 °C | typ 0.46 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55 °C | typ 0.54 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85 °C | typ 1.2 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105 °C | typ 2.8 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 0 °C | typ 0.535 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 25 °C | typ 0.535 · max 0.664 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 40 °C | typ 0.595 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 55 °C | typ 0.7 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 85 °C | typ 1.5 · max 2.99 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.0 V; 105 °C | typ 3.45 · max 7.8 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 0 °C | typ 0.695 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °C | typ 0.72 · max 0.79 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 40 °C | typ 0.79 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55 °C | typ 0.94 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85 °C | typ 2 · max 3.73 uA | 112 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105 °C | typ 4.35 · max 9.14 uA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 0 °C | typ 1 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 25 °C | typ 2 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 40 °C | typ 4 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 55 °C | typ 10 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 85 °C | typ 52 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 1.8 V; 105 °C | typ 145 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 0 °C | typ 1 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 25 °C | typ 2 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 40 °C | typ 5 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 55 °C | typ 12 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 85 °C | typ 60 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 2.4 V; 105 °C | typ 165 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 0 °C | typ 2 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 25 °C | typ 4 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 40 °C | typ 7 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 55 °C | typ 16 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 85 °C | typ 75 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.0 V; 105 °C | typ 225 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 0 °C | typ 7 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 25 °C | typ 15 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 40 °C | typ 23 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 55 °C | typ 42 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 85 °C | typ 170 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC disabled; VBAT = 3.6 V; 105 °C | typ 450 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 0 °C | typ 385 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 25 °C | typ 395 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 40 °C | typ 400 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 55 °C | typ 415 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 85 °C | typ 475 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 2.4 V; 105 °C | typ 595 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 0 °C | typ 495 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 25 °C | typ 505 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 40 °C | typ 515 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 55 °C | typ 530 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 85 °C | typ 600 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.0 V; 105 °C | typ 765 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 0 °C | typ 630 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 25 °C | typ 645 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 40 °C | typ 660 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 55 °C | typ 685 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 85 °C | typ 830 nA | 112 |
| Backup domain supply current IDD(VBAT) | RTC enabled and clocked by LSE quartz; VBAT = 3.6 V; 105 °C | typ 1150 nA | 112 |
| Bus matrix | AHB1; Range 1 | typ 2.4 uA/MHz | 115 |
| Bus matrix | AHB1; Range 2 | typ 2 uA/MHz | 115 |
| Bus matrix | AHB1; Low-power run and sleep | typ 1.8 uA/MHz | 115 |
| TSC | AHB1; Range 1 | typ 1.25 uA/MHz | 115 |
| TSC | AHB1; Range 2 | typ 1.05 uA/MHz | 115 |
| TSC | AHB1; Low-power run and sleep | typ 1.05 uA/MHz | 115 |
| CRC | AHB1; Range 1 | typ 0.465 uA/MHz | 115 |
| CRC | AHB1; Range 2 | typ 0.375 uA/MHz | 115 |
| CRC | AHB1; Low-power run and sleep | typ 0.38 uA/MHz | 115 |
| DMA1 | AHB1; Range 1 | typ 1.9 uA/MHz | 115 |
| DMA1 | AHB1; Range 2 | typ 1.55 uA/MHz | 115 |
| DMA1 | AHB1; Low-power run and sleep | typ 1.8 uA/MHz | 115 |
| DMA2 | AHB1; Range 1 | typ 2 uA/MHz | 115 |
| DMA2 | AHB1; Range 2 | typ 1.65 uA/MHz | 115 |
| DMA2 | AHB1; Low-power run and sleep | typ 1.8 uA/MHz | 115 |
| DMAMUX | AHB1; Range 1 | typ 4.15 uA/MHz | 115 |
| DMAMUX | AHB1; Range 2 | typ 3.4 uA/MHz | 115 |
| DMAMUX | AHB1; Low-power run and sleep | typ 4.45 uA/MHz | 115 |
| All AHB1 peripherals | Range 1 | typ 12 uA/MHz | 115 |
| All AHB1 peripherals | Range 2 | typ 10 uA/MHz | 115 |
| All AHB1 peripherals | Low-power run and sleep | typ 11.5 uA/MHz | 115 |
| AES1 | AHB2; Range 1 | typ 4 uA/MHz | 115 |
| AES1 | AHB2; Range 2 | typ 3.3 uA/MHz | 115 |
| AES1 | AHB2; Low-power run and sleep | typ 3.9 uA/MHz | 115 |
| ADC1 independent clock domain | AHB2; Range 1 | typ 2.55 uA/MHz | 115 |
| ADC1 independent clock domain | AHB2; Range 2 | typ 2.1 uA/MHz | 115 |
| ADC1 independent clock domain | AHB2; Low-power run and sleep | typ 2.1 uA/MHz | 115 |
| ADC1 clock domain | AHB2; Range 1 | typ 2.25 uA/MHz | 115 |
| ADC1 clock domain | AHB2; Range 2 | typ 1.9 uA/MHz | 115 |
| ADC1 clock domain | AHB2; Low-power run and sleep | typ 1.9 uA/MHz | 115 |
| All AHB2 peripherals | Range 1 | typ 7.45 uA/MHz | 115 |
| All AHB2 peripherals | Range 2 | typ 6.2 uA/MHz | 115 |
| All AHB2 peripherals | Low-power run and sleep | typ 6.6 uA/MHz | 115 |
| QSPI | AHB3; Range 1 | typ 7.6 uA/MHz | 115 |
| QSPI | AHB3; Range 2 | typ 6.25 uA/MHz | 115 |
| QSPI | AHB3; Low-power run and sleep | typ 7.1 uA/MHz | 115 |
| TRNG independent clock domain | AHB Shared; Range 1 | typ 3.8 uA/MHz | 115 |
| TRNG clock domain | AHB Shared; Range 1 | typ 2 uA/MHz | 115 |
| SRAM2 | AHB Shared; Range 1 | typ 1.7 uA/MHz | 115 |
| SRAM2 | AHB Shared; Range 2 | typ 1.35 uA/MHz | 115 |
| SRAM2 | AHB Shared; Low-power run and sleep | typ 1.35 uA/MHz | 115 |
| FLASH | AHB Shared; Range 1 | typ 8.35 uA/MHz | 115 |
| FLASH | AHB Shared; Range 2 | typ 6.9 uA/MHz | 115 |
| FLASH | AHB Shared; Low-power run and sleep | typ 8.45 uA/MHz | 115 |
| AES2 | AHB Shared; Range 1 | typ 6.95 uA/MHz | 115 |
| AES2 | AHB Shared; Range 2 | typ 5.75 uA/MHz | 115 |
| AES2 | AHB Shared; Low-power run and sleep | typ 7 uA/MHz | 115 |
| PKA | AHB Shared; Range 1 | typ 4.4 uA/MHz | 115 |
| PKA | AHB Shared; Range 2 | typ 3.65 uA/MHz | 115 |
| PKA | AHB Shared; Low-power run and sleep | typ 4.25 uA/MHz | 115 |
| All AHB shared peripherals | Range 1 | typ 17.5 uA/MHz | 115 |
| All AHB shared peripherals | Range 2 | typ 14.5 uA/MHz | 115 |
| All AHB shared peripherals | Low-power run and sleep | typ 16 uA/MHz | 115 |
| Wakeup time from Sleep mode to Run mode tWUSLEEP | VDD = 3 V; 25 °C | typ 9 · max 10 No. of CPU cycles | 117 |
| Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEP | Wakeup in flash with memory in power-down during low-power sleep mode; FPDS = 1 in PWR_CR1; MSI = 2 MHz; VDD = 3 V; 25 °C | typ 9 · max 10 No. of CPU cycles | 117 |
| Wake up time from Stop 0 mode to Run mode in flash memory tWUSTOP0 | Range 1; wakeup clock MSI = 32 MHz; VDD = 3 V; 25 °C | typ 2.38 · max 2.96 us | 117 |
| Wake up time from Stop 0 mode to Run mode in flash memory tWUSTOP0 | Range 1; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 1.69 · max 2 us | 117 |
| Wake up time from Stop 0 mode to Run mode in flash memory tWUSTOP0 | Range 2; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 1.7 · max 2.01 us | 117 |
| Wake up time from Stop 0 mode to Run mode in flash memory tWUSTOP0 | Range 2; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 7.43 · max 8.59 us | 117 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; wakeup clock MSI = 32 MHz; VDD = 3 V; 25 °C | typ 2.63 · max 3 us | 117 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 1.8 · max 2 us | 117 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 1.82 · max 2.02 us | 117 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 7.58 · max 8.7 us | 117 |
| Wake up time from Stop 1 mode to Run in flash memory SMPS bypassed tWUSTOP1 | Range 1; wakeup clock MSI = 32 MHz; VDD = 3 V; 25 °C | typ 4.67 · max 5.56 us | 117 |
| Wake up time from Stop 1 mode to Run in flash memory SMPS bypassed tWUSTOP1 | Range 1; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.09 · max 6.03 us | 117 |
| Wake up time from Stop 1 mode to Run in flash memory SMPS bypassed tWUSTOP1 | Range 2; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.08 · max 6 us | 117 |
| Wake up time from Stop 1 mode to Run in flash memory SMPS bypassed tWUSTOP1 | Range 2; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 8.36 · max 9.28 us | 117 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 1; wakeup clock MSI = 32 MHz; VDD = 3 V; 25 °C | typ 4.88 · max 5.55 us | 117 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 1; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.29 · max 5.95 us | 117 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 2; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.28 · max 5.96 us | 117 |
| Wake up time from Stop 1 mode to Run in SRAM1 SMPS bypassed tWUSTOP1 | Range 2; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 8.49 · max 9.3 us | 117 |
| Wake up time from Stop 1 mode to Low-power run mode in flash memory tWUSTOP1 | Regulator in Low-power mode; LPR = 1 in PWR_CR1; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 7.96 · max 9.59 us | 117 |
| Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1 | Regulator in Low-power mode; LPR = 1 in PWR_CR1; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 8 · max 9.47 us | 117 |
| Wake up time from Stop 2 mode to Run mode in flash memory SMPS bypassed tWUSTOP2 | Range 1; wakeup clock MSI = 32 MHz; VDD = 3 V; 25 °C | typ 5.27 · max 6.07 us | 118 |
| Wake up time from Stop 2 mode to Run mode in flash memory SMPS bypassed tWUSTOP2 | Range 1; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.71 · max 6.52 us | 118 |
| Wake up time from Stop 2 mode to Run mode in flash memory SMPS bypassed tWUSTOP2 | Range 2; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.72 · max 6.52 us | 118 |
| Wake up time from Stop 2 mode to Run mode in flash memory SMPS bypassed tWUSTOP2 | Range 2; wakeup clock MSI = 4 MHz; VDD = 3 V; 25 °C | typ 9.1 · max 9.93 us | 118 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 SMPS bypassed tWUSTOP2 | Range 1; wakeup clock MSI = 32 MHz; VDD = 3 V; 25 °C | typ 5.2 · max 5.94 us | 118 |
| Wake up time from Stop 2 mode to Run mode in SRAM1 SMPS bypassed tWUSTOP2 | Range 2; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 5.64 · max 6.43 us | 118 |
| Wakeup time from Standby mode to Run mode SMPS Bypassed tWUSTBY | Range 1; wakeup clock HSI16 = 16 MHz; VDD = 3 V; 25 °C | typ 51 · max 58.1 us | 118 |
| Wakeup time from Low-power run mode to Run mode tWULPRUN | Code run with MSI 2 MHz; VDD = 3 V; 25 °C; until REGLPF flag is cleared in PWR_SR2 | typ 15.33 · max 16.3 us | 118 |
| Regulator transition time from Range 2 to Range 1 or Range 1 to Range 2 tVOST | Code run with HSI16; VDD = 3 V; 25 °C; until VOSF flag is cleared in PWR_SR2 | typ 21.4 · max 28.9 us | 118 |
| Wakeup time needed to calculate the maximum USART/LPUART baud rate allowing to wakeup from Stop modes when USART/LPUART clock source is HSI16 tWUUSART / tWULPUART | Stop mode 0 | max 1.7 us | 118 |
| Wakeup time needed to calculate the maximum USART/LPUART baud rate allowing to wakeup from Stop modes when USART/LPUART clock source is HSI16 tWUUSART / tWULPUART | Stop mode 1/2 | max 8.5 us | 118 |
| Startup time for 80% amplitude stabilization tSUA(HSE) | VDDRF stabilized; XOTUNE=000000; -40 to +125 °C range | typ 1000 us | 120 |
| Startup time for XOREADY signal tSUR(HSE) | VDDRF stabilized; XOTUNE=000000; -40 to +125 °C range | typ 250 us | 120 |
| HSE current consumption IDDRF(HSE) | HSEGMC=000, XOTUNE=000000; standalone mode | typ 50 uA | 120 |
| XOTUNE granularity XOTg(HSE) | Capacitor bank | typ 1 · max 5 ppm | 120 |
| XOTUNE number of tuning bits XOTnb(HSE) | Capacitor bank | typ 6 bit | 120 |
| XOTUNE setting time XOTst(HSE) | Capacitor bank | max 0.1 ms | 120 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 00; Low drive capability | typ 250 nA | 120 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 01; Medium low drive capability | typ 315 nA | 120 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 10; Medium high drive capability | typ 500 nA | 120 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 11; High drive capability | typ 630 nA | 120 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 00; Low drive capability | max 0.5 uA/V | 120 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 01; Medium low drive capability | max 0.75 uA/V | 120 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 10; Medium high drive capability | max 1.7 uA/V | 120 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 11; High drive capability | max 2.7 uA/V | 120 |
| Startup time tSU(LSE) | VDD stabilized | typ 2 s | 120 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C; conforming to ANSI/ESDA/JEDEC JS-001; Class 2 | max 2000 V | 132 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | UFQFPN48; TA = +25 °C; conforming to ANSI/ESD STM5.3.1 JS-002; Class C2a | max 500 V | 132 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDD ≥ 2.7 V | max 0.4 V | 136 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDD ≥ 2.7 V | max 0.4 V | 136 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDD ≥ 2.7 V | min 2.4 V | 136 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDD ≥ 2.7 V | max 1.3 V | 136 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA; VDD ≥ 1.62 V | max 0.4 V | 136 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 20 mA; VDD ≥ 2.7 V | max 0.4 V | 136 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 10 mA; VDD ≥ 1.62 V | max 0.4 V | 136 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 2 mA; 1.62 V ≥ VDD ≥ 1.08 V | max 0.4 V | 136 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 5 MHz | 136 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 1.62 V ≤ VDD ≤ 2.7 V | max 1 MHz | 136 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 10 MHz | 136 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 1.62 V ≤ VDD ≤ 2.7 V | max 1.5 MHz | 136 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 25 ns | 136 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 1.62 V ≤ VDD ≤ 2.7 V | max 52 ns | 136 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 2.7 V ≤ VDD ≤ 3.6 V | max 17 ns | 136 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 1.62 V ≤ VDD ≤ ≤2.7 V | max 37 ns | 136 |
| LCD external voltage VLCD | max 3.6 V | 156 | |
| LCD internal reference voltage 0 VLCD0 | typ 2.62 V | 156 | |
| LCD internal reference voltage 1 VLCD1 | typ 2.76 V | 156 | |
| LCD internal reference voltage 2 VLCD2 | typ 2.89 V | 156 | |
| LCD internal reference voltage 3 VLCD3 | typ 3.04 V | 156 | |
| LCD internal reference voltage 4 VLCD4 | typ 3.19 V | 156 | |
| LCD internal reference voltage 5 VLCD5 | typ 3.32 V | 156 | |
| LCD internal reference voltage 6 VLCD6 | typ 3.46 V | 156 | |
| LCD internal reference voltage 7 VLCD7 | typ 3.62 V | 156 | |
| VLCD external capacitance Cext | Buffer OFF; BUFEN=0 is LCD_CR register | min 0.2 · max 2 uF | 156 |
| VLCD external capacitance Cext | Buffer ON; BUFEN=1 is LCD_CR register | min 1 · max 2 uF | 156 |
| Supply current from VDD at VDD = 2.2 V ILCD | Buffer OFF; BUFEN=0 is LCD_CR register | typ 3 uA | 156 |
| Supply current from VDD at VDD = 3.0 V ILCD | Buffer OFF; BUFEN=0 is LCD_CR register | typ 1.5 uA | 156 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer OFF; BUFFEN = 0, PON = 0 | typ 0.5 uA | 156 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer ON; BUFFEN = 1, 1/2 Bias | typ 0.6 uA | 156 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer ON; BUFFEN = 1, 1/3 Bias | typ 0.8 uA | 156 |
| Supply current from VLCD (VLCD = 3 V) IVLCD | Buffer ON; BUFFEN = 1, 1/4 Bias | typ 1 uA | 156 |
| Total High resistor value for Low drive resistive network RHN | typ 5.5 MΩ | 156 | |
| Total Low resistor value for High drive resistive network RLN | typ 240 kΩ | 156 | |
| Thermal resistance junction-ambient ΘJA | UFQFPN48 - 7 mm x 7 mm; Value column | typ 24.9 °C/W | 183 |
| Thermal resistance junction-board ΘJB | UFQFPN48 - 7 mm x 7 mm; Value column | typ 13 °C/W | 183 |

UBIEEE/FrankenMouse
FrankenMouse is a MicroMouse robot that was designed, built, and programmed from scratch by members of the University at Buffalo's IEEE Student Branch.


makeristic/Feather_STM32WB55
KiCad STM32WB55 Bluetooth development board in the Adafruit Feather form factor, with USB-C and STEMMA QT. Work in progress.

NguyenThanhHuy-debug/PCB_Real-Time-Power-Monitoring-System-Development-Light-Switch
PCBReal-Time-Power-Monitoring-System-Development-Light-Switch — a software project built with modern tooling.


arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator

saihibbkaura/saihibb-kaura.github.io
This project implements the board recorded in the engineering portfolio: STM32WB55 MCU, USB-C power/data, single-cell LiPo charging, 3.3 V regulation, I2C environmental sensing, external SPI flash and BLE/RF access.

UBIEEE/FrankenMouse
FrankenMouse is a MicroMouse robot that was designed, built, and programmed from scratch by members of the University at Buffalo's IEEE Student Branch.
Yes. The symbol is MCU_ST_STM32WB:STM32WB55CGUx and the footprint Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
UFQFPN-48(7x7), with 49 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C404023, with 12 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32WB15CCU6 by STMicroelectronics, the STM32WB10CCU5 by STMicroelectronics, the STM32WB50CGU5 by STMicroelectronics and the STM32WB55CCU7 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.