
STM32F072RBT6
STMicroelectronicsExtended
-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 48MHz 51 ARM Cortex-M0 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32F072RBT6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- LQFP-64(10x10)
- Pins
- 64
- In stock
- 0 at JLCPCB (C2052868)
- Used on
- 3 open-source boards
Overview
The STM32F072RBT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 48MHz 51 ARM Cortex-M0 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F072RBTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2052868). 3 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
20- Supply, least
- 2 V · VDD, recommended operating min · p. 53
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 53
- Supply, least
- 1.65 V · VDDIO2, recommended operating min; VDD must be present · p. 53
- Supply, least
- 2.4 V · VDDA, recommended operating min with ADC or DAC used; VDDA must also be at least VDD · p. 53
- Supply, absolute maximum
- 4 V · VDD, absolute max · p. 51
- Works from
- -40 °C · ambient min, suffix 6 · p. 53
- Works up to
- 85 °C · ambient max at maximum power dissipation, suffix 6 · p. 53
- Works up to
- 105 °C · ambient max at low power dissipation, suffix 6; junction limit applies · p. 53
- Junction, hottest
- 105 °C · junction operating max, suffix 6 · p. 53
- Takes working
- 24.62 mA · sum of VDD and VDDA typical Run currents, 48 MHz HSI48, Flash execution, all peripherals enabled, supplies 3.6 V · p. 56
- Takes at most
- 27.88 mA · sum of VDD and VDDA max Run currents at 85 °C, 48 MHz HSI with PLL, Flash execution, all peripherals enabled, supplies 3.6 V · p. 56
- Takes asleep
- 3.7 µA · sum of VDD and VDDA typical Standby currents at 3.6 V, LSI and IWDG off, VDDA monitoring on · p. 59
- A pin gives at most
- 25 mA · I/O or control pin absolute max sink current · p. 52
- Junction to air (LQFP64)
- 44 K/W · junction-to-ambient thermal resistance · p. 121
- Junction, hottest
- 150 °C · junction absolute max · p. 52
- Takes at most
- 28.25 mA · sum of VDD and VDDA max at 105 °C, 3.6 V, HSI48 48 MHz, Flash execution, all peripherals enabled · p. 56
- Takes asleep
- 2.5 µA · sum of VDD and VDDA typical standby, 3.6 V, LSI and IWDG off, VDDA monitoring off · p. 59
- Takes working
- 24.26 mA · sum of typical VDD and VDDA currents, Run mode, 48 MHz, peripherals enabled, 3.3 V · p. 61
- A pin gives at most
- 20 mA · source or sink rating with relaxed VOL/VOH · p. 81
- Junction to air (LQFP64 - 10 × 10 mm / 0.5 mm pitch)
- 44 K/W · junction-to-ambient thermal resistance · p. 121
What it is and has
28- Core
- Arm 32-bit Cortex-M0 CPU · p. 1
- Maximum CPU clock
- 48 MHz · p. 1
- Flash memory
- 128 Kbyte · p. 124
- SRAM
- 16 Kbytes with HW parity · p. 1
- CRC
- Calculation unit · p. 1
- DMA
- 7 channels · p. 1
- ADC
- One 12-bit, 1.0 µs ADC, up to 16 channels · p. 1
- DAC
- One 12-bit converter, 2 channels · p. 1
- Analog comparators
- 2 fast low-power comparators · p. 1
- Timers
- 12 · p. 1
- I2C
- 2 interfaces supporting Fast Mode Plus · p. 1
- USART
- 4 · p. 1
- SPI
- 2, up to 18 Mbit/s · p. 1
- USB
- USB 2.0 full-speed interface · p. 1
- HDMI CEC
- Wakeup on header reception · p. 1
- Debug
- Serial wire debug (SWD) · p. 1
- Unique ID
- 96-bit · p. 1
- Low-power modes
- Sleep, Stop, Standby · p. 1
- Power reset
- Power-on/Power down reset (POR/PDR) · p. 1
- Voltage detector
- Programmable voltage detector (PVD) · p. 1
- External high-speed oscillator
- 4 to 32 MHz crystal oscillator · p. 1
- External low-speed oscillator
- 32 kHz oscillator for RTC with calibration · p. 1
- Pin count
- 64 pins · p. 124
- Package
- LQFP · p. 124
- Core clock
- Up to 48 MHz · p. 1
- CRC
- CRC calculation unit · p. 1
- Clock
- up to 48 MHz · p. 1
- Package
- LQFP64 10x10 mm · p. 1
Around it
7- cap 3 x 100 nF
- between VDD and VSS; Filtering ceramic; one at each VDD/VSS pair, as close as possible to or below its pins. · p. 49
- cap 4.7 μF
- between VDD and VSS; One additional filtering ceramic capacitor; place close to the supply pins. · p. 49
- cap 100 nF
- between VDDIO2 and VSS; Filtering ceramic; place as close as possible to or below the supply pins. · p. 49
- cap 4.7 μF
- between VDDIO2 and VSS; Additional filtering ceramic capacitor; place close to the supply pins. · p. 49
- cap 10 nF
- between VDDA and VSSA; Filtering ceramic; place as close as possible to or below the analog supply pins. · p. 49
- cap 1 μF
- between VDDA and VSSA; Additional filtering ceramic capacitor; place close to the analog supply pins. · p. 49
- diode Schottky diode
- between standard analog input pin and ground; Recommended on standard analog pins that may inject negative current. · p. 87
Specifications
853| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDD–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 51 |
| External I/O supply voltage VDDIO2–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 51 |
| External analog supply voltage VDDA–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 51 |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | Absolute maximum ratings | max 0.4 V | 51 |
| External backup supply voltage VBAT–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 51 |
| Input voltage on TTa pins VIN | Min VSS - 0.3 V | max 4 V | 51 |
| BOOT0 VIN | Absolute maximum input voltage | min 0 · max 9 V | 51 |
| Input voltage on any other pin VIN | Min VSS - 0.3 V | max 4 V | 51 |
| Variations between different VDD power pins |∆VDDx| | max 50 mV | 51 | |
| Variations between all the different ground pins |VSSx - VSS| | max 50 mV | 51 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | Absolute maximum ratings | max 120 mA | 52 |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | Absolute maximum ratings | max -120 mA | 52 |
| Maximum current into each VDD power pin (source) IVDD(PIN) | Absolute maximum ratings | max 100 mA | 52 |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | Absolute maximum ratings | max -100 mA | 52 |
| Output current sunk by any I/O and control pin IIO(PIN) | Absolute maximum ratings | max 25 mA | 52 |
| Output current source by any I/O and control pin IIO(PIN) | Absolute maximum ratings | max -25 mA | 52 |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | Absolute maximum ratings | max 80 mA | 52 |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | Absolute maximum ratings | max -80 mA | 52 |
| Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) | Absolute maximum ratings | max -40 mA | 52 |
| Injected current on B, FT and FTf pins IINJ(PIN) | Absolute maximum ratings; negative/positive limits | min -5 · max 0 mA | 52 |
| Injected current on TC and RST pin IINJ(PIN) | Absolute maximum ratings; ±5 | min -5 · max 5 mA | 52 |
| Injected current on TTa pins IINJ(PIN) | Absolute maximum ratings; ±5 | min -5 · max 5 mA | 52 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute sum of positive and negative injected currents; ±25 | min -25 · max 25 mA | 52 |
| Storage temperature range TSTG | Absolute maximum ratings | min -65 · max 150 °C | 52 |
| Maximum junction temperature TJ | Absolute maximum rating | max 150 °C | 52 |
| Internal AHB clock frequency fHCLK | min 0 · max 48 MHz | 53 | |
| Internal APB clock frequency fPCLK | min 0 · max 48 MHz | 53 | |
| Standard operating voltage VDD | min 2 · max 3.6 V | 53 | |
| I/O supply voltage VDDIO2 | Must not be supplied if VDD is not present | min 1.65 · max 3.6 V | 53 |
| Analog operating voltage (ADC and DAC not used) VDDA | Min VDD; must have a potential equal to or higher than VDD | max 3.6 V | 53 |
| Analog operating voltage (ADC and DAC used) VDDA | Must have a potential equal to or higher than VDD | min 2.4 · max 3.6 V | 53 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 53 | |
| I/O input voltage VIN | TC and RST I/O; max VDDIOx+0.3 V | min -0.3 V | 53 |
| I/O input voltage VIN | TTa I/O; max VDDA+0.3 V | min -0.3 V | 53 |
| I/O input voltage VIN | FT and FTf I/O; disable internal pull-up above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 53 |
| I/O input voltage VIN | BOOT0 | min 0 · max 5.5 V | 53 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | LQFP64; suffix 6, TA = 85 °C | max 455 mW | 53 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 53 |
| Ambient temperature for the suffix 6 version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 53 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 53 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 24.3 · max 26.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; TA = 85 °C | max 27.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; TA = 105 °C | max 27.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 13.1 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 24.1 · max 26.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 85 °C | max 27 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | max 27.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 13 · max 14.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | max 15.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 25 °C | typ 16 · max 18.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 85 °C | max 18.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | max 19.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 25 °C | typ 8.76 · max 9.56 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C | max 9.73 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | max 10.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 25 °C | typ 12.3 · max 13.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 85 °C | max 14.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 25 °C | typ 7.36 · max 7.94 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 85 °C | max 8.37 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | max 8.81 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 85 °C | max 5.28 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 25 °C | typ 2.89 · max 3.17 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 85 °C | max 3.26 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | max 3.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 25 °C | typ 1.25 · max 1.39 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 85 °C | max 1.58 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 105 °C | max 1.87 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 25 °C | typ 0.93 · max 1.06 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 85 °C | max 1.15 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 105 °C | max 1.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 24.1 · max 27.1 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 85 °C | max 27.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | max 27.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 12.9 · max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 25 °C | typ 16.1 · max 18.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 85 °C | max 18.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | max 19.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 25 °C | typ 8.82 · max 9.69 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C | max 9.83 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | max 10.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 25 °C | typ 12.4 · max 14 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 85 °C | max 14.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 25 °C | typ 7.31 · max 7.92 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 85 °C | max 8.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | max 8.75 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 85 °C | max 5.35 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 25 °C | typ 2.87 · max 3.16 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 85 °C | max 3.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | max 3.33 mA | 56 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 23.1 · max 25.4 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled; TA = 85 °C | max 25.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled; TA = 105 °C | max 26.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 12.8 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; TA = 85 °C | max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; TA = 105 °C | max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 23 · max 25.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 85 °C | max 25.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | max 26.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 12.6 · max 13.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | max 13.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 25 °C | typ 15.4 · max 17.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 85 °C | max 17.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | max 18.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 25 °C | typ 7.96 · max 8.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C | max 9.17 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | max 9.73 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 25 °C | typ 11.4 · max 12.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 85 °C | max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 25 °C | typ 6.48 · max 8.04 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 85 °C | max 8.23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | max 8.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 25 °C | typ 4.21 · max 4.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 85 °C | max 4.89 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | max 5.25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 25 °C | typ 2.07 · max 2.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 85 °C | max 2.35 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | max 2.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 25 °C | typ 0.78 · max 0.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 85 °C | max 0.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 105 °C | max 1.15 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 25 °C | typ 0.36 · max 0.48 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 85 °C | max 0.59 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 105 °C | max 0.82 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 23.1 · max 24.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 85 °C | max 25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | max 25.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 12.6 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | max 14 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 25 °C | typ 15.4 · max 17.4 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 85 °C | max 17.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | max 18.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 25 °C | typ 8.05 · max 8.85 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C | max 9.16 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | max 9.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 25 °C | typ 11.5 · max 13 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 85 °C | max 13.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 25 °C | typ 6.49 · max 8.06 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 85 °C | max 8.21 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | max 8.47 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 25 °C | typ 4.34 · max 4.75 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 85 °C | max 5.03 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | max 5.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 25 °C | typ 2.11 · max 2.36 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 85 °C | max 2.38 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | max 2.98 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 15.1 · max 16.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled; TA = 85 °C | max 16.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled; TA = 105 °C | max 17.5 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 3.08 · max 3.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; TA = 85 °C | max 3.56 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; TA = 105 °C | max 3.61 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 15 · max 16.5 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 85 °C | max 16.7 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 2.93 · max 3.28 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 25 °C | typ 9.9 · max 11.4 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 85 °C | max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | max 11.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 25 °C | typ 2 · max 2.24 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C | max 2.32 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | max 2.49 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 25 °C | typ 7.43 · max 8.17 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 85 °C | max 8.71 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | max 8.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 25 °C | typ 1.63 · max 1.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 85 °C | max 1.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 25 °C | typ 2.83 · max 3.09 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 85 °C | max 3.26 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | max 3.66 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 25 °C | typ 0.76 · max 0.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 85 °C | max 0.91 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | max 0.93 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 25 °C | typ 0.42 · max 0.54 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 85 °C | max 0.55 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; TA = 105 °C | max 0.67 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 25 °C | typ 0.28 · max 0.39 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 85 °C | max 0.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; TA = 105 °C | max 0.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 15 · max 17.2 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 85 °C | max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; TA = 105 °C | max 17.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 3.04 · max 3.37 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 85 °C | max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; TA = 105 °C | max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 25 °C | typ 9.93 · max 11.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 85 °C | max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; TA = 105 °C | max 11.7 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 25 °C | typ 2.11 · max 2.35 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 85 °C | max 2.44 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; TA = 105 °C | max 2.65 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 25 °C | typ 7.53 · max 8.45 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 85 °C | max 8.87 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; TA = 105 °C | max 8.95 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 25 °C | typ 1.64 · max 1.83 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 85 °C | max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; TA = 105 °C | max 1.93 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 25 °C | typ 2.95 · max 3.24 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 85 °C | max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; TA = 105 °C | max 3.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 25 °C | typ 0.8 · max 0.92 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 85 °C | max 0.94 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; TA = 105 °C | max 0.97 mA | 57 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 311 · max 326 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 2.4 V; TA = 85 °C | max 334 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 2.4 V; TA = 105 °C | max 343 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 322 · max 337 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 3.6 V; TA = 85 °C | max 345 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 3.6 V; TA = 105 °C | max 354 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 152 · max 170 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; TA = 85 °C | max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; TA = 105 °C | max 182 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 165 · max 184 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; TA = 85 °C | max 196 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; TA = 105 °C | max 200 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 105 · max 121 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; TA = 85 °C | max 126 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; TA = 105 °C | max 128 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 113 · max 129 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; TA = 85 °C | max 136 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; TA = 105 °C | max 138 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 81.9 · max 95.9 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; TA = 85 °C | max 99.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; TA = 105 °C | max 101 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 88.7 · max 102 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; TA = 85 °C | max 107 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; TA = 105 °C | max 108 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 2.7 · max 3.8 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; TA = 85 °C | max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; TA = 105 °C | max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 3.6 · max 4.7 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; TA = 85 °C | max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; TA = 105 °C | max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 2.7 · max 3.8 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; TA = 85 °C | max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; TA = 105 °C | max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 3.6 · max 4.7 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; TA = 85 °C | max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; TA = 105 °C | max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 223 · max 244 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 2.4 V; TA = 85 °C | max 255 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 2.4 V; TA = 105 °C | max 260 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 245 · max 265 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 3.6 V; TA = 85 °C | max 279 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 3.6 V; TA = 105 °C | max 284 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 176 · max 195 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 2.4 V; TA = 85 °C | max 203 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 2.4 V; TA = 105 °C | max 206 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 193 · max 212 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 3.6 V; TA = 85 °C | max 221 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 3.6 V; TA = 105 °C | max 224 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 25 °C | typ 74.2 · max 83.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 2.4 V; TA = 85 °C | max 86.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 2.4 V; TA = 105 °C | max 87.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 25 °C | typ 83.4 · max 92.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 3.6 V; TA = 85 °C | max 95.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 3.6 V; TA = 105 °C | max 96.6 uA | 58 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 15.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 15.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 15.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 15.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 15.8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 15.9 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 25 °C | max 23 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 85 °C | max 49 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 105 °C | max 68 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 3.2 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 3.3 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 3.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 3.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 3.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 3.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 33 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 51 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 0.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 0.7 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C | max 2.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C | max 2.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C | max 3.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| Thermal resistance junction-ambient ΘJA | LQFP64 - 10 × 10 mm / 0.5 mm pitch; value column | typ 44 °C/W | 121 |
| Input voltage on TTa pins VIN | Absolute maximum ratings; min VSS - 0.3 V | max 4 V | 51 |
| BOOT0 VIN | Absolute maximum ratings | min 0 · max 9 V | 51 |
| Input voltage on any other pin VIN | Absolute maximum ratings; min VSS - 0.3 V | max 4 V | 51 |
| Variations between different VDD power pins |∆VDDx| | Absolute maximum ratings | max 50 mV | 51 |
| Variations between all the different ground pins |VSSx - VSS| | Absolute maximum ratings | max 50 mV | 51 |
| Injected current on B, FT and FTf pins IINJ(PIN) | Absolute maximum ratings; negative injection | max -5 mA | 52 |
| Injected current on B, FT and FTf pins IINJ(PIN) | Absolute maximum ratings; positive injection | max 0 mA | 52 |
| Injected current on TC and RST pin IINJ(PIN) | Absolute maximum ratings; magnitude limit ±5 mA | max 5 mA | 52 |
| Injected current on TTa pins IINJ(PIN) | Absolute maximum ratings; magnitude limit ±5 mA | max 5 mA | 52 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute maximum ratings; absolute sum of positive and negative injected currents | max 25 mA | 52 |
| Maximum junction temperature TJ | Absolute maximum ratings | max 150 °C | 52 |
| Analog operating voltage (ADC and DAC not used) VDDA | Minimum VDD; must have a potential equal to or higher than VDD | max 3.6 V | 53 |
| I/O input voltage VIN | FT and FTf I/O; internal pull-up disabled for voltage above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 53 |
| PVD threshold 4 VPVD4 | Rising edge | min 2.47 · typ 2.58 · max 2.69 V | 55 |
| PVD threshold 4 VPVD4 | Falling edge | min 2.37 · typ 2.48 · max 2.59 V | 55 |
| PVD threshold 5 VPVD5 | Rising edge | min 2.57 · typ 2.68 · max 2.79 V | 55 |
| PVD threshold 5 VPVD5 | Falling edge | min 2.47 · typ 2.58 · max 2.69 V | 55 |
| PVD threshold 6 VPVD6 | Rising edge | min 2.66 · typ 2.78 · max 2.9 V | 55 |
| PVD threshold 6 VPVD6 | Falling edge | min 2.56 · typ 2.68 · max 2.8 V | 55 |
| PVD threshold 7 VPVD7 | Rising edge | min 2.76 · typ 2.88 · max 3 V | 55 |
| PVD threshold 7 VPVD7 | Falling edge | min 2.66 · typ 2.78 · max 2.9 V | 55 |
| PVD hysteresis VPVDhyst | Guaranteed by design, not tested in production | typ 100 mV | 55 |
| PVD current consumption IDD(PVD) | Maximum guaranteed by design, not tested in production | typ 0.15 · max 0.26 uA | 55 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.2 · typ 1.23 · max 1.25 V | 55 |
| ADC_IN17 buffer startup time tSTART | Guaranteed by design, not tested in production | max 10 us | 55 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design, not tested in production | min 4 us | 55 |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V; guaranteed by design, not tested in production | max 10 mV | 55 |
| Temperature coefficient TCoeff | Guaranteed by design, not tested in production | min -100 · max 100 ppm/°C | 55 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 24.3 · max 26.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 85 °C | max 27.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 105 °C | max 27.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 13.1 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 24.1 · max 26.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 85 °C | max 27 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 105 °C | max 27.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 13 · max 14.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 85 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 105 °C | max 15.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 25 °C | typ 16 · max 18.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 85 °C | max 18.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 105 °C | max 19.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 25 °C | typ 8.76 · max 9.56 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 85 °C | max 9.73 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 105 °C | max 10.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 25 °C | typ 12.3 · max 13.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 85 °C | max 14.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 105 °C | max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 25 °C | typ 7.36 · max 7.94 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 85 °C | max 8.37 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 105 °C | max 8.81 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 85 °C | max 5.28 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 105 °C | max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 25 °C | typ 2.89 · max 3.17 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 85 °C | max 3.26 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 105 °C | max 3.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 25 °C | typ 1.25 · max 1.39 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 85 °C | max 1.58 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 105 °C | max 1.87 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 25 °C | typ 0.93 · max 1.06 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 85 °C | max 1.15 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 105 °C | max 1.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 24.1 · max 27.1 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 85 °C | max 27.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 105 °C | max 27.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 12.9 · max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 25 °C | typ 16.1 · max 18.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 85 °C | max 18.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 105 °C | max 19.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 25 °C | typ 8.82 · max 9.69 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 85 °C | max 9.83 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 105 °C | max 10.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 25 °C | typ 12.4 · max 14 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 85 °C | max 14.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 105 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 25 °C | typ 7.31 · max 7.92 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 85 °C | max 8.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 105 °C | max 8.75 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 85 °C | max 5.35 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 105 °C | max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 25 °C | typ 2.87 · max 3.16 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 85 °C | max 3.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 105 °C | max 3.33 mA | 56 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 23.1 · max 25.4 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 85 °C | max 25.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 105 °C | max 26.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 12.8 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 85 °C | max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 105 °C | max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 23 · max 25.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 85 °C | max 25.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 105 °C | max 26.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 12.6 · max 13.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 85 °C | max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 105 °C | max 13.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 25 °C | typ 15.4 · max 17.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 85 °C | max 17.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 105 °C | max 18.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 25 °C | typ 7.96 · max 8.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 85 °C | max 9.17 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 105 °C | max 9.73 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 25 °C | typ 11.4 · max 12.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 85 °C | max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 105 °C | max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 25 °C | typ 6.48 · max 8.04 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 85 °C | max 8.23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 105 °C | max 8.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 25 °C | typ 4.21 · max 4.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 85 °C | max 4.89 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 105 °C | max 5.25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 25 °C | typ 2.07 · max 2.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 85 °C | max 2.35 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 105 °C | max 2.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 25 °C | typ 0.78 · max 0.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 85 °C | max 0.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 105 °C | max 1.15 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 25 °C | typ 0.36 · max 0.48 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 85 °C | max 0.59 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 105 °C | max 0.82 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 23.1 · max 24.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 85 °C | max 25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 105 °C | max 25.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 12.6 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 85 °C | max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 105 °C | max 14 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 25 °C | typ 15.4 · max 17.4 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 85 °C | max 17.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 105 °C | max 18.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 25 °C | typ 8.05 · max 8.85 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 85 °C | max 9.16 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 105 °C | max 9.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 25 °C | typ 11.5 · max 13 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 85 °C | max 13.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 105 °C | max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 25 °C | typ 6.49 · max 8.06 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 85 °C | max 8.21 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 105 °C | max 8.47 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 25 °C | typ 4.34 · max 4.75 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 85 °C | max 5.03 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 105 °C | max 5.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 25 °C | typ 2.11 · max 2.36 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 85 °C | max 2.38 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 105 °C | max 2.98 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 15.1 · max 16.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 85 °C | max 16.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals enabled; max TA = 105 °C | max 17.5 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 3.08 · max 3.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 85 °C | max 3.56 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals disabled; max TA = 105 °C | max 3.61 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 15 · max 16.5 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 85 °C | max 16.7 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max TA = 105 °C | max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 2.93 · max 3.28 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 85 °C | max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max TA = 105 °C | max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 25 °C | typ 9.9 · max 11.4 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 85 °C | max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max TA = 105 °C | max 11.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 25 °C | typ 2 · max 2.24 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 85 °C | max 2.32 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max TA = 105 °C | max 2.49 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 25 °C | typ 7.43 · max 8.17 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 85 °C | max 8.71 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max TA = 105 °C | max 8.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 25 °C | typ 1.63 · max 1.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 85 °C | max 1.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max TA = 105 °C | max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 25 °C | typ 2.83 · max 3.09 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 85 °C | max 3.26 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max TA = 105 °C | max 3.66 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 25 °C | typ 0.76 · max 0.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 85 °C | max 0.91 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max TA = 105 °C | max 0.93 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 25 °C | typ 0.42 · max 0.54 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 85 °C | max 0.55 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max TA = 105 °C | max 0.67 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 25 °C | typ 0.28 · max 0.39 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 85 °C | max 0.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max TA = 105 °C | max 0.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 25 °C | typ 15 · max 17.2 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 85 °C | max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max TA = 105 °C | max 17.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 25 °C | typ 3.04 · max 3.37 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 85 °C | max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max TA = 105 °C | max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 25 °C | typ 9.93 · max 11.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 85 °C | max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max TA = 105 °C | max 11.7 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 25 °C | typ 2.11 · max 2.35 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 85 °C | max 2.44 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max TA = 105 °C | max 2.65 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 25 °C | typ 7.53 · max 8.45 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 85 °C | max 8.87 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max TA = 105 °C | max 8.95 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 25 °C | typ 1.64 · max 1.83 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 85 °C | max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max TA = 105 °C | max 1.93 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 25 °C | typ 2.95 · max 3.24 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 85 °C | max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max TA = 105 °C | max 3.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 25 °C | typ 0.8 · max 0.92 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 85 °C | max 0.94 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max TA = 105 °C | max 0.97 mA | 57 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 311 · max 326 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max TA = 85 °C | max 334 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max TA = 105 °C | max 343 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 322 · max 337 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max TA = 85 °C | max 345 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max TA = 105 °C | max 354 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 152 · max 170 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max TA = 85 °C | max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max TA = 105 °C | max 182 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 165 · max 184 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max TA = 85 °C | max 196 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max TA = 105 °C | max 200 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 105 · max 121 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max TA = 85 °C | max 126 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max TA = 105 °C | max 128 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 113 · max 129 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max TA = 85 °C | max 136 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max TA = 105 °C | max 138 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 81.9 · max 95.9 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max TA = 85 °C | max 99.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max TA = 105 °C | max 101 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 88.7 · max 102 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max TA = 85 °C | max 107 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max TA = 105 °C | max 108 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 2.7 · max 3.8 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max TA = 85 °C | max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max TA = 105 °C | max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 3.6 · max 4.7 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max TA = 85 °C | max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max TA = 105 °C | max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 2.7 · max 3.8 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max TA = 85 °C | max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max TA = 105 °C | max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 3.6 · max 4.7 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max TA = 85 °C | max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max TA = 105 °C | max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 223 · max 244 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max TA = 85 °C | max 255 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max TA = 105 °C | max 260 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 245 · max 265 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max TA = 85 °C | max 279 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max TA = 105 °C | max 284 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 176 · max 195 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max TA = 85 °C | max 203 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max TA = 105 °C | max 206 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 193 · max 212 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max TA = 85 °C | max 221 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max TA = 105 °C | max 224 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 154 · max 171 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max TA = 85 °C | max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max TA = 105 °C | max 181 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 168 · max 185 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max TA = 85 °C | max 192 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max TA = 105 °C | max 195 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max TA = 25 °C | typ 74.2 · max 83.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max TA = 85 °C | max 86.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max TA = 105 °C | max 87.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max TA = 25 °C | typ 83.4 · max 92.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max TA = 85 °C | max 95.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max TA = 105 °C | max 96.6 uA | 58 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 0.8 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 1.65 V | typ 0.5 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 1.8 V | typ 0.6 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 2.4 V | typ 0.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 2.7 V | typ 0.8 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 3.3 V | typ 1.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 3.6 V | typ 1.2 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 25 °C | max 1.3 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 85 °C | max 1.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 105 °C | max 2.3 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 1.65 V | typ 0.8 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 1.8 V | typ 0.9 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 2.4 V | typ 1.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 2.7 V | typ 1.2 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 3.3 V | typ 1.4 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 3.6 V | typ 1.6 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 25 °C | max 1.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 85 °C | max 2.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 105 °C | max 2.8 uA | 60 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals enabled | typ 24.1 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals disabled | typ 13.5 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals enabled | typ 14.6 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals disabled | typ 3.5 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals enabled | typ 18.3 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals disabled | typ 10.5 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals enabled | typ 11.1 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals disabled | typ 2.9 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals enabled | typ 16.5 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals disabled | typ 9.6 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals enabled | typ 10 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals disabled | typ 2.7 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals enabled | typ 12.9 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals disabled | typ 7.6 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals enabled | typ 7.8 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals disabled | typ 2.2 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals enabled | typ 8.9 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals disabled | typ 5.3 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals enabled | typ 5.5 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals disabled | typ 1.7 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals enabled | typ 4.8 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals disabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals enabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals disabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals enabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals disabled | typ 2.1 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals enabled | typ 2.2 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals disabled | typ 1.1 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals enabled | typ 2.1 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals disabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals enabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals enabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals disabled | typ 1.3 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals enabled | typ 1.4 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals enabled | typ 1.3 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals disabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals enabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDDA supply IDDA | 48 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 163.3 uA | 61 |
| Current consumption from VDDA supply IDDA | 36 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 124.3 uA | 61 |
| Current consumption from VDDA supply IDDA | 32 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 111.9 uA | 61 |
| Current consumption from VDDA supply IDDA | 24 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 87.1 uA | 61 |
| Current consumption from VDDA supply IDDA | 16 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 62.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 8 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 4 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 2 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 1 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 500 kHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| BusMatrix | AHB; 25 °C | typ 2.2 uA/MHz | 64 |
| CRC | AHB; 25 °C | typ 1.6 uA/MHz | 64 |
| DMA | AHB; 25 °C | typ 5.7 uA/MHz | 64 |
| Flash memory interface | AHB; 25 °C | typ 13 uA/MHz | 64 |
| GPIOA | AHB; 25 °C | typ 8.2 uA/MHz | 64 |
| GPIOB | AHB; 25 °C | typ 8.5 uA/MHz | 64 |
| GPIOC | AHB; 25 °C | typ 2.3 uA/MHz | 64 |
| GPIOD | AHB; 25 °C | typ 1.9 uA/MHz | 64 |
| GPIOE | AHB; 25 °C | typ 2.2 uA/MHz | 64 |
| GPIOF | AHB; 25 °C | typ 1.2 uA/MHz | 64 |
| SRAM | AHB; 25 °C | typ 0.9 uA/MHz | 64 |
| TSC | AHB; 25 °C | typ 5 uA/MHz | 64 |
| All AHB peripherals | AHB; 25 °C | typ 52.6 uA/MHz | 64 |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 32 MHz | 68 | |
| Feedback resistor RF | typ 200 kΩ | 68 | |
| HSE current consumption IDD | During startup | max 8.5 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.4 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.5 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 5 pF@32 MHz | typ 0.8 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@32 MHz | typ 1 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 20 pF@32 MHz | typ 1.5 mA | 68 |
| Oscillator transconductance gm | Startup | min 10 mA/V | 68 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 68 |
| LSE current consumption IDD | low drive capability | typ 0.5 · max 0.9 uA | 69 |
| LSE current consumption IDD | medium-low drive capability | max 1 uA | 69 |
| LSE current consumption IDD | medium-high drive capability | max 1.3 uA | 69 |
| LSE current consumption IDD | high drive capability | max 1.6 uA | 69 |
| Oscillator transconductance gm | low drive capability | min 5 uA/V | 69 |
| Oscillator transconductance gm | medium-low drive capability | min 8 uA/V | 69 |
| Oscillator transconductance gm | medium-high drive capability | min 15 uA/V | 69 |
| Oscillator transconductance gm | high drive capability | min 25 uA/V | 69 |
| Startup time tSU(LSE) | VDDIOx is stabilized | typ 2 s | 69 |
| Frequency fLSI | VDDA = 3.3 V; TA = –40 to 105 °C | min 30 · typ 40 · max 50 kHz | 74 |
| LSI oscillator startup time tsu(LSI) | VDDA = 3.3 V; TA = –40 to 105 °C | max 85 us | 74 |
| LSI oscillator power consumption IDDA(LSI) | VDDA = 3.3 V; TA = –40 to 105 °C | typ 0.75 · max 1.2 uA | 74 |
| PLL input clock fPLL_IN | min 1 · typ 8 · max 24 MHz | 74 | |
| PLL input clock duty cycle fPLL_IN | min 40 · max 60 % | 74 | |
| PLL multiplier output clock fPLL_OUT | min 16 · max 48 MHz | 74 | |
| PLL lock time tLOCK | max 200 us | 74 | |
| Cycle-to-cycle jitter JitterPLL | max 300 ps | 74 | |
| 16-bit programming time tprog | TA = - 40 to +105 °C | min 40 · typ 53.5 · max 60 us | 74 |
| Page (2 KB) erase time tERASE | TA = - 40 to +105 °C | min 20 · max 40 ms | 74 |
| Mass erase time tME | TA = - 40 to +105 °C | min 20 · max 40 ms | 74 |
| Supply current IDD | Write mode; TA = –40 to 105 °C | max 10 mA | 74 |
| Supply current IDD | Erase mode; TA = –40 to 105 °C | max 12 mA | 74 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | All packages; TA = +25 °C; ANSI/ESDA/JEDEC JS-001; Class 2 | max 2000 V | 77 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All others (LQFP64); TA = +25 °C; ANSI/ESDA/JEDEC JS-002; Class C2a | max 500 V | 77 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 6 mA; VDDIOx ≥ 2 V | max 0.4 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA | max 0.4 V | 81 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 10 mA | max 0.4 V | 81 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 1 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 10 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 4 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 50 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 30 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 20 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 10 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 82 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 12 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 34 ns | 83 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 0.5 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 16 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 44 ns | 83 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 83 | |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | typ 200 mV | 84 | |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 84 |
| NRST input filtered pulse VF(NRST) | max 100 ns | 84 | |
| NRST input not filtered pulse VNF(NRST) | 2.7 < VDD < 3.6 | min 300 ns | 84 |
| NRST input not filtered pulse VNF(NRST) | 2.0 < VDD < 3.6 | min 500 ns | 84 |
| Analog supply voltage for ADC ON VDDA | ADC ON | min 2.4 · max 3.6 V | 84 |
| Current consumption of the ADC IDDA (ADC) | VDDA = 3.3 V | typ 0.9 mA | 84 |
| ADC clock frequency fADC | min 0.6 · max 14 MHz | 84 | |
| Sampling rate fS | 12-bit resolution | min 0.043 · max 1 MHz | 84 |
Pins, by the datasheet
60- 1 VBAT
- Backup power supply. · p. 36
- 2 PC13
- GPIO; WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT; output restrictions apply. · p. 37
- 7 NRST
- Active-low device reset input and internal reset output, with embedded weak pull-up. · p. 37
- 8 PC0
- GPIO; EVENTOUT or ADC_IN10. · p. 37
- 9 PC1
- GPIO; EVENTOUT or ADC_IN11. · p. 37
- 10 PC2
- GPIO; SPI2_MISO, I2S2_MCK, EVENTOUT or ADC_IN12. · p. 37
- 11 PC3
- GPIO; SPI2_MOSI, I2S2_SD, EVENTOUT or ADC_IN13. · p. 37
- 12 VSSA
- Analog ground. · p. 37
- 13 VDDA
- Analog power supply. · p. 37
- 14 PA0
- GPIO; USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX, RTC_TAMP2, WKUP1, ADC_IN0 or COMP1_INM6. · p. 37
- 15 PA1
- GPIO; USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT, ADC_IN1 or COMP1_INP. · p. 38
- 16 PA2
- GPIO; USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, ADC_IN2, COMP2_INM6 or WKUP4. · p. 38
- 17 PA3
- GPIO; USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, ADC_IN3 or COMP2_INP. · p. 38
- 18 VSS
- Ground. · p. 38
- 19 VDD
- Digital power supply. · p. 38
- 20 PA4
- GPIO; SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, COMP1_INM4, COMP2_INM4, ADC_IN4 or DAC_OUT1. · p. 38
- 21 PA5
- GPIO; SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2, COMP1_INM5, COMP2_INM5, ADC_IN5 or DAC_OUT2. · p. 38
- 22 PA6
- GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS or ADC_IN6. · p. 38
- 23 PA7
- GPIO; SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT or ADC_IN7. · p. 38
- 24 PC4
- GPIO; EVENTOUT, USART3_TX or ADC_IN14. · p. 39
- 25 PC5
- GPIO; TSC_G3_IO1, USART3_RX, ADC_IN15 or WKUP5. · p. 39
- 26 PB0
- GPIO; TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK or ADC_IN8. · p. 39
- 27 PB1
- GPIO; TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 or ADC_IN9. · p. 39
- 28 PB2
- GPIO or TSC_G3_IO4. · p. 39
- 29 PB10
- GPIO; SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC or TIM2_CH3. · p. 39
- 30 PB11
- GPIO; USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 or I2C2_SDA. · p. 39
- 31 VSS
- Ground. · p. 39
- 32 VDD
- Digital power supply. · p. 40
- 33 PB12
- GPIO; TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2 or EVENTOUT. · p. 40
- 34 PB13
- GPIO; SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N or TSC_G6_IO3; FM+ capable. · p. 40
- 35 PB14
- GPIO; SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1 or TSC_G6_IO4; FM+ capable. · p. 40
- 36 PB15
- GPIO; SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, WKUP7 or RTC_REFIN. · p. 40
- 37 PC6
- GPIO or TIM3_CH1; supplied by VDDIO2. · p. 40
- 38 PC7
- GPIO or TIM3_CH2; supplied by VDDIO2. · p. 40
- 39 PC8
- GPIO or TIM3_CH3; supplied by VDDIO2. · p. 40
- 40 PC9
- GPIO or TIM3_CH4; supplied by VDDIO2. · p. 40
- 41 PA8
- GPIO; USART1_CK, TIM1_CH1, EVENTOUT, MCO or CRS_SYNC; supplied by VDDIO2. · p. 41
- 42 PA9
- GPIO; USART1_TX, TIM1_CH2, TIM15_BKIN or TSC_G4_IO1; supplied by VDDIO2. · p. 41
- 43 PA10
- GPIO; USART1_RX, TIM1_CH3, TIM17_BKIN or TSC_G4_IO2; supplied by VDDIO2. · p. 41
- 44 PA11
- GPIO; CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT or USB_DM; supplied by VDDIO2. · p. 41
- 45 PA12
- GPIO; CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT or USB_DP; supplied by VDDIO2. · p. 41
- 46 PA13
- GPIO; IR_OUT, SWDIO or USB_NOE; supplied by VDDIO2; SWDIO with internal pull-up after reset. · p. 41
- 47 VSS
- Ground. · p. 41
- 48 VDDIO2
- Digital power supply for the designated I/Os. · p. 41
- 49 PA14
- GPIO; USART2_TX or SWCLK; supplied by VDDIO2; SWCLK with internal pull-down after reset. · p. 41
- 50 PA15
- GPIO; SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR or EVENTOUT; supplied by VDDIO2. · p. 41
- 51 PC10
- GPIO; USART3_TX or USART4_TX; supplied by VDDIO2. · p. 41
- 52 PC11
- GPIO; USART3_RX or USART4_RX; supplied by VDDIO2. · p. 42
- 53 PC12
- GPIO; USART3_CK or USART4_CK; supplied by VDDIO2. · p. 42
- 54 PD2
- GPIO; USART3_RTS or TIM3_ETR; supplied by VDDIO2. · p. 42
- 55 PB3
- GPIO; SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1 or EVENTOUT. · p. 42
- 56 PB4
- GPIO; SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2 or EVENTOUT. · p. 42
- 57 PB5
- GPIO; SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 or WKUP6. · p. 42
- 58 PB6
- GPIO; I2C1_SCL, USART1_TX, TIM16_CH1N or TSC_G5_I03; FM+ capable. · p. 42
- 59 PB7
- GPIO; I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N or TSC_G5_IO4; FM+ capable. · p. 43
- 60 BOOT0
- Boot memory selection. · p. 43
- 61 PB8
- GPIO; I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC or CAN_RX; FM+ capable. · p. 43
- 62 PB9
- GPIO; SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT or CAN_TX; FM+ capable. · p. 43
- 63 VSS
- Ground. · p. 43
- 64 VDD
- Digital power supply. · p. 43
Open-source boards using it
3- 2 layers91 × 120 mm

- 4 layers99.7 × 99.7 mm

- 4 layers199.7 × 64.8 mm

Parts like it
8STM32F103RCT6
LQFP-64(10x10)-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 48KB 51 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MSPM0G3507SPMR
LQFP-64(10x10)-40℃~+125℃ 1.62V~3.6V 128KB 32 Bit 32KB 60 80MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)GD32F103RBT6
LQFP-64(10x10)108MHz 128KB 12bit 2.6V~3.6V 51 ARM Cortex-M3 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F103RCT6
LQFP-64(10x10)108MHz 12bit 12bit 2.6V~3.6V 256KB 51 ARM Cortex-M3 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F303RCT6
LQFP-64(10x10)120MHz 12bit 12bit 2.6V~3.6V 256KB 51 ARM Cortex-M4 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)STM32F105RCT6
LQFP-64(10x10)-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 51 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F103RBT6
LQFP-64(10x10)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 51 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F105RBT6
LQFP-64(10x10)-40℃~+85℃ 128KB 12bit 12bit 2V~3.6V 32 Bit 51 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32F072RBT6?
Yes. The symbol is MCU_ST_STM32F0:STM32F072RBTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F072RBT6?
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
Where is the STM32F072RBT6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F072RBT6?
JLCPCB lists it as part C2052868, with 0 in stock; the sellers' links on this page open their listings.
What can replace the STM32F072RBT6?
Parts like it in the library: the STM32F103RCT6 by STMicroelectronics, the MSPM0G3507SPMR by Texas Instruments, the GD32F103RBT6 by GigaDevice and the GD32F103RCT6 by GigaDevice. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F072RBT6?
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.