2 layers20.3 × 24.5 mm
Examples
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
46 parts546MIT
Overview
The STM32F072CBU6 is a microcontroller made by STMicroelectronics in a UFQFPN-48(7x7) package with 49 pins. -40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F072CBUx, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, from KiCad's library), ready for a KiCad board. 98 are in stock at JLCPCB (part C92504). 10 open-source boards in 10 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
19- Supply, least
- 2 V · VDD, recommended operating min · p. 53
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 53
- Supply, least
- 1.65 V · VDDIO2, recommended operating min; VDD must be present · p. 53
- Supply, least
- 2.4 V · VDDA, recommended operating min with ADC or DAC used; VDDA ≥ VDD · p. 53
- Supply, absolute maximum
- 4 V · VDD, absolute max · p. 51
- Works from
- -40 °C · Ambient min, suffix 6, maximum power dissipation · p. 53
- Works up to
- 85 °C · Ambient max, suffix 6, maximum power dissipation · p. 53
- Works up to
- 105 °C · Ambient max, suffix 6, low power dissipation subject to TJ limit · p. 53
- Junction, hottest
- 105 °C · Junction max, suffix 6, operating · p. 53
- Junction, hottest
- 150 °C · Junction absolute max · p. 52
- Takes working
- 24.62 mA · Sum of VDD and VDDA typical Run currents, 3.6 V, HSI48, 48 MHz, Flash, all peripherals enabled · p. 56
- Takes at most
- 28.24 mA · Sum of VDD and VDDA max Run currents, 3.6 V, HSI48, 48 MHz, Flash, all peripherals enabled, TA = 105 °C · p. 56
- Takes asleep
- 2.5 µA · Sum of VDD and VDDA typical Standby currents, 3.6 V, LSI and IWDG OFF, VDDA monitoring OFF · p. 59
- A pin gives at most
- 25 mA · I/O or control pin sink absolute max · p. 52
- Junction to air (UFQFPN48)
- 32 K/W · Junction-to-ambient thermal resistance · p. 121
- Takes at most
- 28.25 mA · sum of VDD and VDDA max Run currents at 105 °C, HSI48, 48 MHz, Flash, all peripherals enabled, supplies 3.6 V · p. 56
- Takes asleep
- 3.7 µA · sum of VDD and VDDA typical Standby currents, LSI and IWDG OFF, VDDA monitoring ON, supplies 3.6 V · p. 59
- Takes working
- 24.26 mA · sum of VDD and VDDA typical Run currents, 48 MHz, peripherals enabled, 3.3 V · p. 61
- A pin gives at most
- 20 mA · GPIO source or sink rating with relaxed VOL/VOH · p. 81
What it is and has
13- SRAM
- 16 Kbytes with HW parity · p. 1
- CRC
- CRC calculation unit · p. 1
- DMA
- 7-channel controller · p. 1
- ADC
- One 12-bit, 1.0 µs ADC, up to 16 channels · p. 1
- DAC
- One 12-bit converter with 2 channels · p. 1
- Low-power modes
- Sleep, Stop, Standby · p. 1
- Unique ID
- 96-bit · p. 1
- Package environmental compliance
- ECOPACK®2 · p. 1
- Core
- Arm 32-bit Cortex-M0 CPU · p. 1
- CPU frequency
- up to 48 MHz · p. 1
- Timers
- 12 · p. 1
- CPU clock
- up to 48 MHz · p. 1
- ADC
- 12-bit · p. 84
Around it
3- cap 5 pF to 20 pF
- between OSC_IN and GND; CL1; high-quality ceramic for high-frequency applications; select to match crystal load requirements and place close to oscillator pins. · p. 68
- crystal 32.768 kHz
- between LSE oscillator input and LSE oscillator output; Optional external LSE crystal resonator; place crystal and load capacitors close to oscillator pins. · p. 69
- cap 0.1 μF
- between NRST and GND; External capacitor for protection against parasitic resets, as shown in Figure 25. · p. 84
Specifications
521| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDD–VSS | min -0.3 · max 4 V | 51 | |
| External I/O supply voltage VDDIO2–VSS | min -0.3 · max 4 V | 51 | |
| External analog supply voltage VDDA–VSS | min -0.3 · max 4 V | 51 | |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | VDD > VDDA | max 0.4 V | 51 |
| External backup supply voltage VBAT–VSS | min -0.3 · max 4 V | 51 | |
| Input voltage on TTa pins VIN | Minimum VSS - 0.3 V | max 4 V | 51 |
| BOOT0 VIN | min 0 · max 9 V | 51 | |
| Input voltage on any other pin VIN | Minimum VSS - 0.3 V | max 4 V | 51 |
| Variations between different VDD power pins |∆VDDx| | max 50 mV | 51 | |
| Variations between all the different ground pins |VSSx - VSS| | max 50 mV | 51 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 120 mA | 52 | |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | max -120 mA | 52 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 52 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max -100 mA | 52 | |
| Output current sunk by any I/O and control pin IIO(PIN) | max 25 mA | 52 | |
| Output current source by any I/O and control pin IIO(PIN) | max -25 mA | 52 | |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | max 80 mA | 52 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | max -80 mA | 52 | |
| Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) | max -40 mA | 52 | |
| Injected current on TC and RST pin IINJ(PIN) | ±5 mA | max 5 mA | 52 |
| Injected current on TTa pins IINJ(PIN) | ±5 mA | max 5 mA | 52 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | ±25 mA; absolute sum of positive and negative injected currents | max 25 mA | 52 |
| Storage temperature range TSTG | min -65 · max 150 °C | 52 | |
| Maximum junction temperature TJ | Absolute maximum | max 150 °C | 52 |
| Internal AHB clock frequency fHCLK | min 0 · max 48 MHz | 53 | |
| Internal APB clock frequency fPCLK | min 0 · max 48 MHz | 53 | |
| Standard operating voltage VDD | min 2 · max 3.6 V | 53 | |
| I/O supply voltage VDDIO2 | Must not be supplied if VDD is not present | min 1.65 · max 3.6 V | 53 |
| Analog operating voltage (ADC and DAC not used) VDDA | Minimum VDD; must have a potential equal to or higher than VDD | max 3.6 V | 53 |
| Analog operating voltage (ADC and DAC used) VDDA | Must have a potential equal to or higher than VDD | min 2.4 · max 3.6 V | 53 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 53 | |
| I/O input voltage VIN | TC and RST I/O; maximum VDDIOx+0.3 V | min -0.3 V | 53 |
| I/O input voltage VIN | TTa I/O; maximum VDDA+0.3 V | min -0.3 V | 53 |
| I/O input voltage VIN | FT and FTf I/O; disable internal pull-up above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 53 |
| I/O input voltage VIN | BOOT0 | min 0 · max 5.5 V | 53 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | UFQFPN48; suffix 6, TA = 85 °C | max 625 mW | 53 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 53 |
| Ambient temperature for the suffix 6 version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 53 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 53 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 24.3 · max 26.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 85 °C | max 27.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 105 °C | max 27.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 13.1 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 24.1 · max 26.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | max 27 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 105 °C | max 27.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 13 · max 14.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 105 °C | max 15.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 12.3 · max 14.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 7.36 · max 8.37 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.52 · max 5.28 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.89 · max 3.26 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 85 °C | typ 1.25 · max 1.58 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.93 · max 1.15 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 24.1 · max 27.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.9 · max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 16.1 · max 18.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 8.82 · max 9.83 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 12.4 · max 14.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 7.31 · max 8.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.52 · max 5.35 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.87 · max 3.25 mA | 56 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 23.1 · max 25.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.8 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 15.4 · max 17.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 7.96 · max 9.17 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 11.4 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 6.48 · max 8.23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.21 · max 4.89 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.07 · max 2.35 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 85 °C | typ 0.78 · max 0.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.36 · max 0.59 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 23.1 · max 25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.6 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 15.4 · max 17.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 8.05 · max 9.16 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 11.5 · max 13.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 6.49 · max 8.21 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.34 · max 5.03 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.11 · max 2.38 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 15.1 · max 16.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 3.08 · max 3.56 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 15 · max 16.7 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.93 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 9.9 · max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 2 · max 2.32 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 7.43 · max 8.71 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 1.63 · max 1.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 2.83 · max 3.26 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.76 · max 0.91 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 85 °C | typ 0.42 · max 0.55 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.28 · max 0.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 15 · max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 3.04 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 9.93 · max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.11 · max 2.44 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 7.53 · max 8.87 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 1.64 · max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 2.95 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.8 · max 0.94 mA | 57 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 311 · max 334 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 322 · max 345 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 152 · max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 165 · max 196 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 105 · max 126 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 113 · max 136 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 81.9 · max 99.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 88.7 · max 107 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 2.7 · max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 3.6 · max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 2.7 · max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 3.6 · max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 223 · max 255 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 245 · max 279 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 176 · max 203 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 193 · max 221 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 168 · max 192 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 74.2 · max 86.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 83.4 · max 95.3 uA | 58 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 15.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 15.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 15.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 15.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 15.8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 15.9 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 25 °C | max 23 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 85 °C | max 49 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 105 °C | max 68 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 3.2 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 3.3 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 3.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 3.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 3.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 3.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 33 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 51 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 0.8 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 0.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 0.7 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C | max 2.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C | max 2.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C | max 3.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V; max at TA = 85 °C | typ 2.8 · max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V; max at TA = 85 °C | typ 2.8 · max 3.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V; max at TA = 85 °C | typ 2.6 · max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| Thermal resistance junction-ambient ΘJA | UFQFPN48 - 7 × 7 mm | typ 32 °C/W | 121 |
| Injected current on B, FT and FTf pins IINJ(PIN) | Negative injection limit | max -5 mA | 52 |
| Injected current on B, FT and FTf pins IINJ(PIN) | Positive injection limit | max 0 mA | 52 |
| Injected current on TC and RST pin IINJ(PIN) | Positive or negative injection magnitude | max 5 mA | 52 |
| Injected current on TTa pins IINJ(PIN) | Positive or negative injection magnitude | max 5 mA | 52 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute sum of positive and negative injected currents | max 25 mA | 52 |
| Maximum junction temperature TJ | max 150 °C | 52 | |
| I/O input voltage VIN | FT and FTf I/O; internal pull-up disabled above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 53 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | UFQFPN48; suffix 6; TA = 85 °C | max 625 mW | 53 |
| PVD threshold 4 VPVD4 | Rising edge | min 2.47 · typ 2.58 · max 2.69 V | 55 |
| PVD threshold 4 VPVD4 | Falling edge | min 2.37 · typ 2.48 · max 2.59 V | 55 |
| PVD threshold 5 VPVD5 | Rising edge | min 2.57 · typ 2.68 · max 2.79 V | 55 |
| PVD threshold 5 VPVD5 | Falling edge | min 2.47 · typ 2.58 · max 2.69 V | 55 |
| PVD threshold 6 VPVD6 | Rising edge | min 2.66 · typ 2.78 · max 2.9 V | 55 |
| PVD threshold 6 VPVD6 | Falling edge | min 2.56 · typ 2.68 · max 2.8 V | 55 |
| PVD threshold 7 VPVD7 | Rising edge | min 2.76 · typ 2.88 · max 3 V | 55 |
| PVD threshold 7 VPVD7 | Falling edge | min 2.66 · typ 2.78 · max 2.9 V | 55 |
| PVD hysteresis VPVDhyst | Guaranteed by design, not tested in production | typ 100 mV | 55 |
| PVD current consumption IDD(PVD) | Maximum guaranteed by design, not tested in production | typ 0.15 · max 0.26 uA | 55 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.2 · typ 1.23 · max 1.25 V | 55 |
| ADC_IN17 buffer startup time tSTART | Guaranteed by design, not tested in production | max 10 us | 55 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design, not tested in production | min 4 us | 55 |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V; guaranteed by design, not tested in production | max 10 mV | 55 |
| Temperature coefficient TCoeff | Guaranteed by design, not tested in production | min -100 · max 100 ppm/°C | 55 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 24.3 · max 26.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals enabled; TA = 85 °C | max 27.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals enabled; TA = 105 °C | max 27.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 13.1 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals disabled; TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals disabled; TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 24.1 · max 26.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C | max 27 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C | max 27.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 13 · max 14.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 15.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 16 · max 18.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C | max 18.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C | max 19.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8.76 · max 9.56 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 9.73 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 10.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 12.3 · max 13.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C | max 14.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C | max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 7.36 · max 7.94 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 8.37 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 8.81 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C | max 5.28 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C | max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.89 · max 3.17 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 3.26 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 3.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 1.25 · max 1.39 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 85 °C | max 1.58 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 105 °C | max 1.87 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.93 · max 1.06 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 85 °C | max 1.15 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 105 °C | max 1.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 24.1 · max 27.1 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C | max 27.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C | max 27.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.9 · max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 16.1 · max 18.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C | max 18.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C | max 19.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8.82 · max 9.69 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 9.83 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 10.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 12.4 · max 14 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C | max 14.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C | max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 7.31 · max 7.92 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 8.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 8.75 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C | max 5.35 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C | max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.87 · max 3.16 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 3.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 3.33 mA | 56 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 23.1 · max 26.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 12.8 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; typical value | typ 23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C | max 26.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 12.6 · max 13.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 15.4 · max 18.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 7.96 · max 9.73 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 11.4 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 6.48 · max 8.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 4.21 · max 5.25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 2.07 · max 2.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 0.78 · max 1.15 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 0.36 · max 0.82 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 23.1 · max 25.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 12.6 · max 14 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 15.4 · max 18.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 8.05 · max 9.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 11.5 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 6.49 · max 8.47 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 4.34 · max 5.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 2.11 · max 2.98 mA | 57 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 15.1 · max 17.5 mA | 57 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 3.08 · max 3.61 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 15 · max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 2.93 · max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 9.9 · max 11.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 2 · max 2.49 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 7.43 · max 8.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 1.63 · max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 2.83 · max 3.66 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 0.76 · max 0.93 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 0.42 · max 0.67 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 0.28 · max 0.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 15 · max 17.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 3.04 · max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 9.93 · max 11.7 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 2.11 · max 2.65 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 7.53 · max 8.95 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 1.64 · max 1.93 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 105 °C | typ 2.95 · max 3.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 105 °C | typ 0.8 · max 0.97 mA | 57 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 311 · max 343 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 322 · max 354 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 152 · max 182 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 165 · max 200 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 105 · max 128 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 113 · max 138 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 81.9 · max 101 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 88.7 · max 108 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 2.7 · max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 3.6 · max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 2.7 · max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 3.6 · max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 223 · max 260 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 245 · max 284 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 176 · max 206 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 193 · max 224 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 2.4 V; maximum at TA = 105 °C | typ 74.2 · max 87.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 3.6 V; maximum at TA = 105 °C | typ 83.4 · max 96.6 uA | 58 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.65 V | typ 0.5 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.8 V | typ 0.6 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.4 V | typ 0.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.7 V | typ 0.8 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.3 V | typ 1.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.6 V | typ 1.2 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 25 °C | max 1.3 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 85 °C | max 1.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 105 °C | max 2.3 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.65 V | typ 0.8 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.8 V | typ 0.9 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.4 V | typ 1.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.7 V | typ 1.2 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.3 V | typ 1.4 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.6 V | typ 1.6 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 25 °C | max 1.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 85 °C | max 2.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 105 °C | max 2.8 uA | 60 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 24.1 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 13.5 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 14.6 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 3.5 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals enabled | typ 18.3 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals disabled | typ 10.5 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals enabled | typ 11.1 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals disabled | typ 2.9 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals enabled | typ 16.5 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals disabled | typ 9.6 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals enabled | typ 10 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals disabled | typ 2.7 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals enabled | typ 12.9 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals disabled | typ 7.6 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals enabled | typ 7.8 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals disabled | typ 2.2 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals enabled | typ 8.9 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals disabled | typ 5.3 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals enabled | typ 5.5 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals disabled | typ 1.7 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals enabled | typ 4.8 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals disabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals enabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals disabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals enabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals disabled | typ 2.1 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals enabled | typ 2.2 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals disabled | typ 1.1 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals enabled | typ 2.1 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals disabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals enabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals enabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals disabled | typ 1.3 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals enabled | typ 1.4 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals enabled | typ 1.3 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals disabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals enabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDDA supply IDDA | 48 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 163.3 uA | 61 |
| Current consumption from VDDA supply IDDA | 36 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 124.3 uA | 61 |
| Current consumption from VDDA supply IDDA | 32 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 111.9 uA | 61 |
| Current consumption from VDDA supply IDDA | 24 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 87.1 uA | 61 |
| Current consumption from VDDA supply IDDA | 16 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 62.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 8 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 4 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 2 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 1 MHz; Run or Sleep mode; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 500 kHz; Run or Sleep mode; peripherals enabled or disabled | typ 2.5 uA | 61 |
| BusMatrix | AHB; typical consumption at 25 °C | typ 2.2 uA/MHz | 64 |
| CRC | AHB; typical consumption at 25 °C | typ 1.6 uA/MHz | 64 |
| DMA | AHB; typical consumption at 25 °C | typ 5.7 uA/MHz | 64 |
| Flash memory interface | AHB; typical consumption at 25 °C | typ 13 uA/MHz | 64 |
| GPIOA | AHB; typical consumption at 25 °C | typ 8.2 uA/MHz | 64 |
| GPIOB | AHB; typical consumption at 25 °C | typ 8.5 uA/MHz | 64 |
| GPIOC | AHB; typical consumption at 25 °C | typ 2.3 uA/MHz | 64 |
| GPIOD | AHB; typical consumption at 25 °C | typ 1.9 uA/MHz | 64 |
| GPIOE | AHB; typical consumption at 25 °C | typ 2.2 uA/MHz | 64 |
| GPIOF | AHB; typical consumption at 25 °C | typ 1.2 uA/MHz | 64 |
| SRAM | AHB; typical consumption at 25 °C | typ 0.9 uA/MHz | 64 |
| TSC | AHB; typical consumption at 25 °C | typ 5 uA/MHz | 64 |
| All AHB peripherals | Typical consumption at 25 °C | typ 52.6 uA/MHz | 64 |
| Oscillator frequency fOSC_IN | - | min 4 · typ 8 · max 32 MHz | 68 |
| Feedback resistor RF | - | typ 200 kΩ | 68 |
| HSE current consumption IDD | During startup | max 8.5 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 10 pF@8 MHz | typ 0.4 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 45 Ω, CL = 10 pF@8 MHz | typ 0.5 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 5 pF@32 MHz | typ 0.8 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 10 pF@32 MHz | typ 1 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 20 pF@32 MHz | typ 1.5 mA | 68 |
| Oscillator transconductance gm | Startup | min 10 mA/V | 68 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 68 |
| LSE current consumption IDD | low drive capability | typ 0.5 · max 0.9 uA | 69 |
| LSE current consumption IDD | medium-low drive capability | max 1 uA | 69 |
| LSE current consumption IDD | medium-high drive capability | max 1.3 uA | 69 |
| LSE current consumption IDD | high drive capability | max 1.6 uA | 69 |
| Oscillator transconductance gm | low drive capability | min 5 uA/V | 69 |
| Oscillator transconductance gm | medium-low drive capability | min 8 uA/V | 69 |
| Oscillator transconductance gm | medium-high drive capability | min 15 uA/V | 69 |
| Oscillator transconductance gm | high drive capability | min 25 uA/V | 69 |
| Startup time tSU(LSE) | VDDIOx is stabilized | typ 2 s | 69 |
| Frequency fLSI | VDDA = 3.3 V, TA = –40 to 105 °C | min 30 · typ 40 · max 50 kHz | 74 |
| LSI oscillator startup time tsu(LSI) | VDDA = 3.3 V, TA = –40 to 105 °C | max 85 us | 74 |
| LSI oscillator power consumption IDDA(LSI) | VDDA = 3.3 V, TA = –40 to 105 °C | typ 0.75 · max 1.2 uA | 74 |
| PLL input clock fPLL_IN | Use appropriate multiplier factors for fPLL_OUT | min 1 · typ 8 · max 24 MHz | 74 |
| PLL input clock duty cycle fPLL_IN | - | min 40 · max 60 % | 74 |
| PLL multiplier output clock fPLL_OUT | - | min 16 · max 48 MHz | 74 |
| PLL lock time tLOCK | - | max 200 us | 74 |
| Cycle-to-cycle jitter JitterPLL | - | max 300 ps | 74 |
| 16-bit programming time tprog | TA = - 40 to +105 °C | min 40 · typ 53.5 · max 60 us | 74 |
| Page (2 KB) erase time tERASE | TA = - 40 to +105 °C | min 20 · max 40 ms | 74 |
| Mass erase time tME | TA = - 40 to +105 °C | min 20 · max 40 ms | 74 |
| Supply current IDD | Write mode; TA = –40 to 105 °C | max 10 mA | 74 |
| Supply current IDD | Erase mode; TA = –40 to 105 °C | max 12 mA | 74 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | All packages; class 2; TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001 | max 2000 V | 77 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | UFQFPN48 (All others); class C2a; TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-002 | max 500 V | 77 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 6 mA; VDDIOx ≥ 2 V | max 0.4 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA | max 0.4 V | 81 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 10 mA | max 0.4 V | 81 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 1 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 10 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 4 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 50 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 30 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 20 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 10 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 82 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 12 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 34 ns | 83 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 0.5 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 16 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 44 ns | 83 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | - | min 10 ns | 83 |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | - | typ 200 mV | 84 |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 84 |
| NRST input filtered pulse VF(NRST) | - | max 100 ns | 84 |
| NRST input not filtered pulse VNF(NRST) | 2.7 < VDD < 3.6 | min 300 ns | 84 |
| NRST input not filtered pulse VNF(NRST) | 2.0 < VDD < 3.6 | min 500 ns | 84 |
| Analog supply voltage for ADC ON VDDA | - | min 2.4 · max 3.6 V | 84 |
| Current consumption of the ADC IDDA (ADC) | VDDA = 3.3 V | typ 0.9 mA | 84 |
| ADC clock frequency fADC | - | min 0.6 · max 14 MHz | 84 |
| Sampling rate fS | 12-bit resolution | min 0.043 · max 1 MHz | 84 |
Pins, by the datasheet
25- 1 VBAT
- Backup power supply. · p. 36
- 2 PC13
- GPIO with WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT functions. · p. 37
- 7 NRST
- Active-low device reset input and internal reset output, with embedded weak pull-up resistor. · p. 37
- 8 VSSA
- Analog ground. · p. 37
- 9 VDDA
- Analog power supply. · p. 37
- 10 PA0
- GPIO with USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX, RTC_TAMP2, WKUP1, ADC_IN0 and COMP1_INM6 functions. · p. 37
- 11 PA1
- GPIO; USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT, ADC_IN1 and COMP1_INP. · p. 38
- 12 PA2
- GPIO; USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, ADC_IN2, COMP2_INM6 and WKUP4. · p. 38
- 13 PA3
- GPIO; USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, ADC_IN3 and COMP2_INP. · p. 38
- 14 PA4
- GPIO; SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT1. · p. 38
- 15 PA5
- GPIO; SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2, COMP1_INM5, COMP2_INM5, ADC_IN5 and DAC_OUT2. · p. 38
- 16 PA6
- GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS and ADC_IN6. · p. 38
- 17 PA7
- GPIO; SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT and ADC_IN7. · p. 38
- 18 PB0
- GPIO; TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK and ADC_IN8. · p. 39
- 19 PB1
- GPIO; TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 and ADC_IN9. · p. 39
- 20 PB2
- GPIO with TSC_G3_IO4 alternate function. · p. 39
- 21 PB10
- GPIO; SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC and TIM2_CH3. · p. 39
- 22 PB11
- GPIO; USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 and I2C2_SDA. · p. 39
- 23 VSS
- Ground. · p. 39
- 43 PB7
- GPIO; I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N and TSC_G5_IO4. · p. 43
- 44 BOOT0
- Boot memory selection. · p. 43
- 45 PB8
- GPIO; I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC and CAN_RX. · p. 43
- 46 PB9
- GPIO; SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT and CAN_TX. · p. 43
- 47 VSS
- Ground. · p. 43
- 48 VDD
- Digital power supply. · p. 43
Parameters
19- ADC (Bit)
- 12bit
- CPU Core
- ARM Cortex-M0
- CPU Maximum Speed
- 48MHz
- Core Size
- 32 Bit
- Current - Supply
- 24.62mA
- Current - Supply(Max)
- 28.24mA
- DAC (Bit)
- 12bit
- Junction Temperature(Max)
- 105℃
- Number of I/O
- 37
- Operating Temperature
- -40℃~+105℃
- Oscillator Type
- Built-in
- Output Current per Pin(Max)
- 25mA
- Program Memory Type
- FLASH
- Program Storage Size
- 128KB
- RAM Size
- 16KB
- Standby Current
- 2.5uA
- Thermal Resistance(Junction to Ambient)
- 32℃/W
- Voltage - Supply
- 1.65V~3.6V
- Voltage - Supply(Absolute Max)
- 4V
Order codes
2- STM32F072CBU6TRLCSC C2054107
- STM32F072CBU6LCSC C92504
Pinout
49| Pin | Name | Type |
|---|---|---|
| 1 | VBAT | Power in |
| 2 | PC13 | Input/output |
| 3 | PC14 | Input/output |
| 4 | PC15 | Input/output |
| 5 | PF0 | Input/output |
| 6 | PF1 | Input/output |
| 7 | NRST | Input |
| 8 | VSSA | Power in |
| 9 | VDDA | Power in |
| 10 | PA0 | Input/output |
| 11 | PA1 | Input/output |
| 12 | PA2 | Input/output |
| 13 | PA3 | Input/output |
| 14 | PA4 | Input/output |
| 15 | PA5 | Input/output |
| 16 | PA6 | Input/output |
| 17 | PA7 | Input/output |
| 18 | PB0 | Input/output |
| 19 | PB1 | Input/output |
| 20 | PB2 | Input/output |
| 21 | PB10 | Input/output |
| 22 | PB11 | Input/output |
| 23 | VSS | Power in |
| 24 | VDD | Power in |
| 25 | PB12 | Input/output |
| 26 | PB13 | Input/output |
| 27 | PB14 | Input/output |
| 28 | PB15 | Input/output |
| 29 | PA8 | Input/output |
| 30 | PA9 | Input/output |
| 31 | PA10 | Input/output |
| 32 | PA11 | Input/output |
| 33 | PA12 | Input/output |
| 34 | PA13 | Input/output |
| 35 | VSS | Passive |
| 36 | VDDIO2 | Power in |
| 37 | PA14 | Input/output |
| 38 | PA15 | Input/output |
| 39 | PB3 | Input/output |
| 40 | PB4 | Input/output |
| 41 | PB5 | Input/output |
| 42 | PB6 | Input/output |
| 43 | PB7 | Input/output |
| 44 | BOOT0 | Input |
| 45 | PB8 | Input/output |
| 46 | PB9 | Input/output |
| 47 | VSS | Passive |
| 48 | VDD | Power in |
| 49 | VSS | Passive |
Open-source boards using it
All 10- 2 layers55 × 25 mm
Headless tef lite
FMDX-org/headless-tef-lite
Small low cost Headless TEF variant.
97 parts10CERN-OHL-W-2.0 - 2 layers241.3 × 74.6 mm
Cursed scandinavian iso van
Ciantha/cursed-scandinavian-iso-van
first "original" pcb, let's see how this goes
106 parts5 - 2 layers26.3 × 17.1 mm
Kryptonite
samienr/kryptonite
affordable open source USB-C security key using STM32F072CBU6 and ATECC608A
27 parts2MIT - 2 layers285 × 94.6 mm
YM60JISv2 PCB
ymkn/YM60JISv2
The successor to the YM60JIS. A 60% PCB supporting both MX and Gateron Low Profile 3.0 compatible switches with universal tray mount case.
168 parts2MIT - 4 layers84 × 103 mm
- 2 layers303.2 × 92.1 mm
Athene pcb f072
kebbn/athene-pcb-f072
65% PCB design for the Athene keyboard by KL using the STM32F072 MCU
193 partsMIT - 4 layers88 × 82 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/STM32F072CBU6" title="STM32F072CBU6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STM32F072CBU6.jpg" alt="STM32F072CBU6" width="1200" height="900">[](https://pcbkit.io/parts/st/STM32F072CBU6)Questions
Is there a KiCad symbol and footprint for the STM32F072CBU6?
Yes. The symbol is MCU_ST_STM32F0:STM32F072CBUx and the footprint Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F072CBU6?
UFQFPN-48(7x7), with 49 pins. Its footprint is drawn on this page.
Where is the STM32F072CBU6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F072CBU6?
JLCPCB lists it as part C92504, with 98 in stock; the sellers' links on this page open their listings.
What can replace the STM32F072CBU6?
Parts like it in the library: the STM32WLE5CCU6 by STMicroelectronics, the STM32G431CBU6 by STMicroelectronics, the STM32F401CCU6 by STMicroelectronics and the STM32F411CCU6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F072CBU6?
10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
STM32WLE5CCU6
UFQFPN-48(7x7)UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G431CBU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 32KB 42 ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F401CCU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 12bit 256KB 32 Bit 36 64KB 84MHz ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F411CCU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 100MHz 128KB 12bit 256KB 32 Bit 36 ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F071CBU6
UFQFPN-48(7x7)UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F411CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 100MHz 128KB 12bit 32 Bit 36 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F401CBU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 128KB 12bit 32 Bit 36 64KB 84MHz ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G473CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 42 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)