2 layers303.2 × 92.1 mm
Athene pcb f072
kebbn/athene-pcb-f072
65% PCB design for the Athene keyboard by KL using the STM32F072 MCU
193 partsMIT
2 layers285 × 94.6 mm
YM60JISv2 PCB
ymkn/YM60JISv22The successor to the YM60JIS. A 60% PCB supporting both MX and Gateron Low Profile 3.0 compatible switches with universal tray mount case.
- Size
- 285 × 94.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 115
- Pads
- 878
- Tracks, vias
- 1,233, 135
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 May 2026
- Updated
- 17 May 2026
Overview
YM60JISv2 PCB is an open-source printed circuit board by ymkn, from the ymkn/YM60JISv2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 285 × 94.6 mm with 168 parts on 115 nets, routed with 1,233 tracks and 135 vias.
It is built around the STM32F072CBU6, SRV05-4-P-T7 and XC6206P332MR, with the 1N4148W among its other parts. Its parts include 68 diodes, 68 switches, 11 capacitors, 3 resistors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
4
STM32F072CBU6
UFQFPN-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SRV05-4-P-T7
SOT-23-612V 1A@8/20us 3.5pF 500W@8/20us 5V 5uA 6V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSPROTEKESD And Surge Protection (TVS/ESD)
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
README.mdYM60JISv2
The successor to the YM60JIS. A 60% PCB supporting both MX and Gateron Low Profile 3.0 compatible switches with universal tray mount case.
Default Layout
You can also customize the layout using Vial.
Build Guide
See Build Guide.
License
This project is licensed under the MIT License, see the LICENSE file for details.
However, this does not apply to logo data (image files, KiCAD footprints, etc.) included in the resources of this project.
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | 1N4148W | ymknlib_Various:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 61 | SW_Push | ymknlib_Switch_MX_GLP3:SW_MX_GLP3_1u | SW1, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW21, SW22, SW23, SW24, SW25, SW26, SW27 +45 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C8 |
| 5 | SW_Push | ymknlib_Switch_MX_GLP3:SW_MX_GLP3_1.25u | SW5, SW10, SW15, SW20, SW38 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | ymknlibs-nonfree-logo:logo-icononly | logo-icononly | |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LOGO | ymknlibs-nonfree-logo:ym60jisv2_logo | G*** |
| 1 | SRV05-4-P-T7 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | STM32F072CBU6 | STM32F072CBx:UFQFPN48-7x7mm | U3 |
| 1 | SW_Push | ymknlib_Switch_MX_GLP3:SW_MX_GLP3_1.5u | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | BTN_BOOT1 |
| 1 | SW_Push | ymknlib_Switch_MX_GLP3:SW_MX_GLP3_1.75u | SW3 |
| 1 | TYPE-C 16PIN 2MD(073) | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
The 158 most common of 168 parts.
Questions
How big is the YM60JISv2 PCB PCB?
It measures 285 × 94.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the YM60JISv2 PCB use?
168 parts, built around the STM32F072CBU6, SRV05-4-P-T7, XC6206P332MR and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the YM60JISv2 PCB KiCad files?
From the ymkn/YM60JISv2 repository on GitHub, at the commit this page was made from: the board is KiCAD/PCB/YM60JISv2_PCB.kicad_pcb and its schematic KiCAD/PCB/YM60JISv2_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the YM60JISv2 PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers385 × 127.3 mm
- 2 layers
- 2 layers46.5 × 37.4 mm
Hellen1-mcu
rusefi/hellen-miata-NB2
a rusEFI board with a 72 pin connector. Works for a Mazda Miata NB2 or any generic 8 cylinder vehicle :)
92 parts - 4 layers70.4 × 107.2 mm
- 4 layers65 × 56 mm
Sensor HAT
Eniemooo/Sensor-HAT
Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.
112 parts - 2 layers100 × 100 mm
Hour meter board microfit can handroute
ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator
152 parts - 2 layers303.6 × 96.1 mm
