
003RoboticsStartStop - Dev
Alex-C-EE/StartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
STMicroelectronicsExtended
-40℃~+85℃ 16KB 18 2V~3.6V 32 Bit 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHS
The STM32C011F4P6 is a microcontroller made by STMicroelectronics in a TSSOP-20 package with 20 pins. -40℃~+85℃ 16KB 18 2V~3.6V 32 Bit 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32C0:STM32C011F4Px, from KiCad's library) and its footprint (Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 621 are in stock at JLCPCB (part C5452432). 6 open-source boards in 5 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | PB7 | Input/output |
| 2 | PC14 | Input/output |
| 3 | PC15 | Input/output |
| 4 | VDD | Power in |
| 5 | VSS | Power in |
| 6 | PF2 | Input/output |
| 7 | PA0 | Input/output |
| 8 | PA1 | Input/output |
| 9 | PA2 | Input/output |
| 10 | PA3 | Input/output |
| 11 | PA4 | Input/output |
| 12 | PA5 | Input/output |
| 13 | PA6 | Input/output |
| 14 | PA7 | Input/output |
| 15 | PA8 | Input/output |
| 16 | PA9/PA11 | Input/output |
| 17 | PA10/PA12 | Input/output |
| 18 | PA13 | Input/output |
| 19 | PA14 | Input/output |
| 20 | PB6 | Input/output |

Alex-C-EE/StartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.

salvatore999uwo/mini_hvac_v2
Second version of the temperature control system for a small model room.


waterloo-rocketry/electrical_tutorials
Hardware & software used in electrical tutorials

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

Alex-C-EE/StartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
Yes. The symbol is MCU_ST_STM32C0:STM32C011F4Px and the footprint Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TSSOP-20, with 20 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5452432, with 621 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32F030F4P6 by STMicroelectronics, the CH32V003F4P6 by WCH (Nanjing Qinheng Microelectronics), the STM32G030F6P6 by STMicroelectronics and the STM32F042F4P6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.