Skip to the content
PCBKitNew board
LD39015M33R, in 3D

LD39015M33R

STMicroelectronics

-40℃~+125℃@(Tj) 1 100mV@(100mA) 150mA 18uA 29uVrms 3.3V 5.5V 65dB@(1kHz) Fixed Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Extended
DatasheetJLCPCBLCSCst/LD39015M33R
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5L
Pins
5

Overview

The LD39015M33R is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOT-23-5L package with 5 pins. -40℃~+125℃@(Tj) 1 100mV@(100mA) 150mA 18uA 29uVrms 3.3V 5.5V 65dB@(1kHz) Fixed Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LD39015M33R, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 1,977 are in stock at JLCPCB (part C2798212). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

IN1GND2EN3OUT5
Regulator_Linear:LD39015M33RFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Parameters

12
Features
Enable control
Noise
29uVrms
Number of Outputs
1
Operating Temperature
-40℃~+125℃@(Tj)
Output Configuration
Positive
Output Current
150mA
Output Type
Fixed
Output Voltage
3.3V
Power Supply Rejection Ratio (PSRR)
65dB@(1kHz)
Voltage - Supply
5.5V
Voltage Dropout
100mV@(100mA)
standby current
18uA

Order codes

1

Pinout

5
The pins of the LD39015M33R
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

All 8
  • 2 layers28.3 × 17.3 mmTrackball mcu, the printed circuit board in 3D

    Trackball mcu

    dpapavas/orb-trackball

    A parametric optical trackball device

    42 parts30AGPL-3.0
  • 4 layers54.2 × 26.5 mmRadio circuit, the printed circuit board in 3D

    Radio circuit

    anttikes/usb-fm-radio

    Repository for an USB-plugged FM radio project, consisting of the firmware, cross-platform user interface and PCB / Schematic portions

    47 parts6
  • 2 layers64 × 64 mmEva terminals, the printed circuit board in 3D

    Eva terminals

    elcojacobs/eva-toolboard

    Breakout board for EVA to mount to the back of a Nema 17 or name 17 motor. (31mm hole spacing or 43.8mm diagonally).

    33 parts
  • 4 layers71.8 × 71.8 mmShotClockProject, the printed circuit board in 3D

    ShotClockProject

    NeusAap/ShotClock

    Shotclock hardware & software

    107 parts
  • 4 layers18 × 36 mmOne button interface, the printed circuit board in 3D

    One button interface

    yannidd/one-button-interface

    PCB layout and schematic and Arduino code for a single push-button interface that can be used to turn a device on/off as well as a user input to interact with the firmware on a microcontroller.

    15 partsGPL-3.0
  • 4 layers55.9 × 25.4 mmSbc sd, the printed circuit board in 3D

    Sbc sd

    dpicken/atari-hw

    Hardware for Atari 8-bit projects

    17 parts6MIT
  • 2 layers145 × 27 mmLed array driver-11-feb-2020, the printed circuit board in 3D

    Led array driver-11-feb-2020

    themainframe/led-matrix-driver-pcb

    PCB CAM files for my LED Matrix Driver Project based on ESP32

    72 parts2
  • 4 layers55.7 × 46.4 mmBlackbox, the printed circuit board in 3D

    Blackbox

    L0czek/rakieta

    The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.

    64 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/st/LD39015M33R" title="LD39015M33R in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/st/LD39015M33R.jpg" alt="LD39015M33R" width="1200" height="900">
A picture that opens the part, for a README
[![LD39015M33R](https://pcbkit.io/embed/parts/st/LD39015M33R.jpg?size=s)](https://pcbkit.io/parts/st/LD39015M33R)

Questions

Is there a KiCad symbol and footprint for the LD39015M33R?

Yes. The symbol is Regulator_Linear:LD39015M33R and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD39015M33R?

SOT-23-5L, with 5 pins. Its footprint is drawn on this page.

Where is the LD39015M33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD39015M33R?

JLCPCB lists it as part C2798212, with 1,977 in stock; the sellers' links on this page open their listings.

What can replace the LD39015M33R?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD39015M33R?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8