
P2 Kevinbot Board
meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller
NXP SemiconductorsExtended
QFN-28-EP(6x6) LED Drivers ROHS
The PCA9685BS is a LED Driver made by NXP Semiconductors in a QFN-28-EP(6x6) package with 29 pins. QFN-28-EP(6x6) LED Drivers ROHS.
PCBKit's library has its KiCad symbol (Driver_LED:PCA9685BS, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2844961). 30 open-source boards in 24 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | A3 | Input |
| 2 | A4 | Input |
| 3 | LED0 | Output |
| 4 | LED1 | Output |
| 5 | LED2 | Output |
| 6 | LED3 | Output |
| 7 | LED4 | Output |
| 8 | LED5 | Output |
| 9 | LED6 | Output |
| 10 | LED7 | Output |
| 11 | VSS | Power in |
| 12 | LED8 | Output |
| 13 | LED9 | Output |
| 14 | LED10 | Output |
| 15 | LED11 | Output |
| 16 | LED12 | Output |
| 17 | LED13 | Output |
| 18 | LED14 | Output |
| 19 | LED15 | Output |
| 20 | OE | Input |
| 21 | A5 | Input |
| 22 | EXTCLK | Input |
| 23 | SCL | Input |
| 24 | SDA | Input/output |
| 25 | VDD | Power in |
| 26 | A0 | Input |
| 27 | A1 | Input |
| 28 | A2 | Input |
| 29 | VSS | Power in |

meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller

MbFredys/PCB-LEDs-Controller
LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.

DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock

JoshCrouch/HEXCORE
HEXCORE is a Hexapod-type robot that includes both a custom remote as well as vision system making use of 2.4GHz RF and WiFi respectively.

icl-rocketry/Ricardo-PickleRick
A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.

PlanAndBuild/NoNameComputer-2.0
The NoNameComputer 2.0 AKA NNCpro is being designed for mid-high power rockets and other flying vehicle. It will be equipped with various sensors like barometers, IMUs, magnetometer, current sensing etc.


GoTouchGra55/J.O.L.T
12 degrees of freedom, 1 custom devboard, and 0 off-the-shelf solutions. JOLT is a quadruped robot built entirely from scratch.
Yes. The symbol is Driver_LED:PCA9685BS and the footprint Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-28-EP(6x6), with 29 pins. Its footprint is drawn on this page.
JLCPCB lists it as part C2844961, with 0 in stock; the sellers' links on this page open their listings.
30 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.