Skip to the content
12345678

PCA9306DC

NXP SemiconductorsExtended

Automatic direction detection、Output enable high-impedance Level translator SMBus、I2C VSSOP-8-0.5mm Translators, Level Shifters ROHS

Part id
nxp/PCA9306DC
Category
Translators, Level Shifters
Package
VSSOP-8-0.5mm
Pins
8
In stock
0 at JLCPCB (C140829)
Used on
16 open-source boards

Overview

The PCA9306DC is a translators, Level Shifter made by NXP Semiconductors in a VSSOP-8-0.5mm package with 8 pins. Automatic direction detection、Output enable high-impedance Level translator SMBus、I2C VSSOP-8-0.5mm Translators, Level Shifters ROHS.

PCBKit's library has its KiCad symbol (Interface:PCA9306DC, from KiCad's library) and its footprint (Package_SO:VSSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C140829). 16 open-source boards in 15 repositories on GitHub use it.

Symbol

GND1VREF12SCL13SDA14SDA25SCL26VREF27EN8
Interface:PCA9306DCFrom KiCad's library

Footprint

12345678
Package_SO:VSSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the PCA9306DC
PinNameType
1GNDPower in
2VREF1Power in
3SCL1Input/output
4SDA1Input/output
5SDA2Input/output
6SCL2Input/output
7VREF2Power in
8ENInput

Open-source boards using it

16See all 16
  • 12 layers280 × 111.2 mmFpga candelabra, the printed circuit board in 3D

    Fpga candelabra

    chipsalliance/rocket-pcb

    PCB libraries and templates for rocket-chip based FPGA/ASIC designs

    738 parts21Apache-2.0
  • 2 layers82.3 × 35.5 mmFc980c controller, the printed circuit board in 3D

    Fc980c controller

    wlhlm/fc980c-controller

    Leopold FC980C replacement keyboard controller

    38 parts20
  • 4 layers65 × 30 mmRbpi z hat, the printed circuit board in 3D

    Rbpi z hat

    chipiki/PXFmini_v2

    It's attempt to make a second version of died project PXFmini

    119 parts7
  • 4 layers112 × 75 mmKvm board, the printed circuit board in 3D

    Kvm board

    FuNK3Y/picoKVM

    A network KVM that can switch inputs of smart monitors

    95 parts6
  • 2 layers31.1 × 63.5 mmPico vga, the printed circuit board in 3D

    Pico vga

    benkyd/pico-vga

    A video card interface for the Raspberry Pi Pico to drive the VGA standard written in C

    30 parts4MIT
  • 4 layers48 × 55.4 mmMinimap pcb v1, the printed circuit board in 3D

    Minimap pcb v1

    lucapoulos/minimap

    See our final report for a technical overview of the demo we presented.

    77 parts2
  • 2 layers230 × 160 mmAntcontroller, the printed circuit board in 3D

    Antcontroller

    cr1tbit/antcontroller

    402 parts1
  • 2 layers50.8 × 44 mmRf room sensor, the printed circuit board in 3D

    Rf room sensor

    dselcan/rf-room-sensor-hw

    PCB design files and BOM for the RF Room Sensor device

    32 partsBSD-3-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PCA9306DC?

Yes. The symbol is Interface:PCA9306DC and the footprint Package_SO:VSSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PCA9306DC?

VSSOP-8-0.5mm, with 8 pins. Its footprint is drawn on this page.

Where is the PCA9306DC datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the PCA9306DC?

JLCPCB lists it as part C140829, with 0 in stock; the sellers' links on this page open their listings.

What can replace the PCA9306DC?

Parts like it in the library: the 74LVC2T45DC by Nexperia, the TCA9517ADGKR by Texas Instruments, the RS0102YVS8 by Jiangsu RUNIC Tech and the LSF0102DCH by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PCA9306DC?

16 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.