
Fpga candelabra
chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs

A video card interface for the Raspberry Pi Pico to drive the VGA standard written in C
Pico vga is an open-source printed circuit board by benkyd, from the benkyd/pico-vga repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.1 × 63.5 mm with 30 parts on 43 nets, routed with 313 tracks and 19 vias.
It is built around the PCA9306DC. Its parts include 21 resistors, 2 ICs, 2 connectors and 1 capacitor. It belongs with the RP2040 boards of this library.

A VGA Driver made from a Raspberry Pi Pico with the eventual goal of being an acting video card.
I also plan to experiment with 3D rendering on it.
Kicad and fabrication files can be found in kicad/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R18, R19, R20, R21 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R7, R11 |
| 3 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6, R10 |
| 3 | 4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R9 |
| 2 | 50 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14 |
| 2 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R12 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 499 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | LOGO | kiwih_kicad:product-version | G |
| 1 | LOGO | pico:osh | |
| 1 | LOGO | kiwih_kicad:name-logo | G |
| 1 | LOGO | kiwih_kicad:product-logo | G |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | PCA9306DC | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U1 |
| 1 | PICO_RP2040 | pico:raspberrypi-pico-module | U0 |
| 1 | VGA_FEMALE | pico:XM4L1542132 | J0 |

chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs




lucapoulos/minimap
See our final report for a technical overview of the demo we presented.


dselcan/rf-room-sensor-hw
PCB design files and BOM for the RF Room Sensor device

It measures 31.1 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the PCA9306DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the benkyd/pico-vga repository on GitHub, at the commit this page was made from: the board is designs/picovga/picovga.kicad_pcb and its schematic designs/picovga/picovga.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).