Skip to the content

MMA8451QT

NXP SemiconductorsExtended

-40℃~+85℃ 1.8uA 1.95V~3.6V 14bit Accelerometer I2C X,Y,Z ±8g QFN-16(3x3) Accelerometers ROHS

Part id
nxp/MMA8451QT
Category
Accelerometers
Package
QFN-16(3x3)
Pins
16
In stock
0 at JLCPCB (C71598)
Used on
11 open-source boards

Overview

The MMA8451QT is an accelerometer made by NXP Semiconductors in a QFN-16(3x3) package with 16 pins. -40℃~+85℃ 1.8uA 1.95V~3.6V 14bit Accelerometer I2C X,Y,Z ±8g QFN-16(3x3) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (dk_Motion-Sensors-Accelerometers:MMA8451QT, from Digikey) and its footprint (Source_Footprints:VQFN-16_3x3mm, from Digikey), ready for a KiCad board. JLCPCB lists it (part C71598). 11 open-source boards in 11 repositories on GitHub use it.

Symbol

1VDDIO2BYP3DNC4SCL5GND6SDA7SA08NC9INT210GND11INT112GND13NC14VDD15NC16NC
dk_Motion-Sensors-Accelerometers:MMA8451QTFrom Digikey

Footprint

Source_Footprints:VQFN-16_3x3mmFrom Digikey

Pinout

16
The pins of the MMA8451QT
PinNameType
1VDDIOPower in
2BYPInput
3DNCNot connected
4SCLInput/output
5GNDPower in
6SDAInput/output
7SA0Input/output
8NCNot connected
9INT2Output
10GNDPower in
11INT1Output
12GNDPower in
13NCNot connected
14VDDPower in
15NCNot connected
16NCNot connected

Open-source boards using it

11See all 11
  • 2 layers88 × 102 mmToniebox v1v2, the printed circuit board in 3D

    Toniebox v1v2

    toniebox-reverse-engineering/toniebox-pcb

    KiCad schematic of the Toniebox PCB (including datasheets).

    11 parts37
  • 2 layers102.4 × 77.4 mmScheda PSE, the printed circuit board in 3D

    Scheda PSE

    Eduzyolo/PSE_project

    This is the official repo for the PSE project

    176 parts1
  • 2 layers86.4 × 81.9 mmOpen ruche monitoring, the printed circuit board in 3D

    Open ruche monitoring

    fcl2002/Open-Ruche-Monitoring

    An intelligent beehive monitoring solution combining embedded AI, LoRaWAN communication, and solar power to help beekeepers protect their colonies and optimize hive management.

    28 parts1MIT
  • 4 layers41.2 × 49.5 mmPcb, the printed circuit board in 3D

    Pcb

    louislwh/pcb

    44 parts
  • 2 layers68.6 × 53.3 mmMicroP Final Porject, the printed circuit board in 3D

    MicroP Final Porject

    Sebastian-S-Posada/balloon-data-logger-shield

    An Arduino Uno shield, designed in KiCad, that logs temperature, humidity, barometric pressure, and acceleration to a microSD card. It's built as a lightweight, low-power payload for a high-altitude balloon flight.

    21 parts
  • 2 layers18 × 20.1 mmMMA845X, the printed circuit board in 3D

    MMA845X

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    20 parts56Apache-2.0
  • 2 layers65 × 22.6 mmPhoenix, the printed circuit board in 3D

    Phoenix

    wFairmanOlin/OlinRocketryClub

    Repo for a self-designed flight computer

    35 parts6

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the MMA8451QT?

Yes. The symbol is dk_Motion-Sensors-Accelerometers:MMA8451QT and the footprint Source_Footprints:VQFN-16_3x3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMA8451QT?

QFN-16(3x3), with 16 pins. Its footprint is drawn on this page.

Where is the MMA8451QT datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the MMA8451QT?

JLCPCB lists it as part C71598, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MMA8451QT?

Parts like it in the library: the MMA8452QR1 by NXP Semiconductors and the MMA8451QR1 by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MMA8451QT?

11 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.