Skip to the content
12345678

MCP6042-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1.4V~6V 14kHz 15uV/℃ 170nV/√Hz@1kHz 1pA 1pA 2 20mA 3V/ms 3mV 600nA 75dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS

Part id
microchip/MCP6042-I/P
Category
Operational Amplifier
Package
PDIP-8
Pins
8
In stock
3 at JLCPCB (C640408)
Used on
6 open-source boards

Overview

The MCP6042-I/P is an operational Amplifier made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1.4V~6V 14kHz 15uV/℃ 170nV/√Hz@1kHz 1pA 1pA 2 20mA 3V/ms 3mV 600nA 75dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP6542-I_P, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 3 are in stock at JLCPCB (part C640408). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

4VSS8VDD
EasyEDA_Cloud:MCP6542-I_PFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP6042-I/P
PinNameType
1VOUTAOutput
2VINA-Unspecified
3VINA+Unspecified
4VSSUnspecified
5VINB+Unspecified
6VINB-Unspecified
7VOUTBOutput
8VDDUnspecified

Open-source boards using it

6
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 2 layers83.8 × 50.8 mmShunt charge controller, the printed circuit board in 3D

    Shunt charge controller

    grillbaer/solar-power-supply

    Solar power harvesting for micro controller projects with li-Ion battery and highly efficient charge controller

    16 parts3MIT
  • 2 layersWarduxere append, the printed circuit board in 3D

    Warduxere append

    josefjebavy/warduxere

    Wireless Arduino with low power consumption

    140 parts3
  • 2 layers138 × 162 mmRemora Nucleo F446ZE Hat, the printed circuit board in 3D

    Remora Nucleo F446ZE Hat

    ben-jacobson/RemoraNucleoHatPCB

    Cost-effective, customisable LinuxCNC motion control unit.

    179 parts1GPL-3.0
  • 2 layers99.1 × 99.1 mmMessplatine, the printed circuit board in 3D

    Messplatine

    PhyPiDAQ/EducatorsGuide

    Tutorial for educators and examples of educational physics experiments

    51 parts1BSD-2-Clause
  • 2 layers100 × 75 mmAirQualityPCB, the printed circuit board in 3D

    AirQualityPCB

    leslier7/AirQualityPCB

    MAE 5220 Air Quality Board

    57 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6042-I/P?

Yes. The symbol is EasyEDA_Cloud:MCP6542-I_P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6042-I/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6042-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6042-I/P?

JLCPCB lists it as part C640408, with 3 in stock; the sellers' links on this page open their listings.

What can replace the MCP6042-I/P?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM258P by Texas Instruments and the LM741CN/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6042-I/P?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.