

Warduxere append
Wireless Arduino with low power consumption
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 31
- Pads
- 424
- Tracks, vias
- 1,004, 40
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 12 Nov 2015
- Updated
- 2 Aug 2018
Overview
Warduxere append is an open-source printed circuit board by josefjebavy, from the josefjebavy/warduxere repository on GitHub. It is a 2-layer board with 140 parts on 31 nets, routed with 1,004 tracks and 40 vias.
It is built around the ATMEGA328P-AU and MCP6042-I/P. Its parts include 24 resistors, 16 capacitors, 8 ICs, 4 diodes and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MCP6042-I/P
PDIP-8-40℃~+85℃ 1.4V~6V 14kHz 15uV/℃ 170nV/√Hz@1kHz 1pA 1pA 2 20mA 3V/ms 3mV 600nA 75dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
README
README.mdWarduxere
Wireless Arduino with low power consumption
Warduxere (old name was Warduino) was awarded the prize in a magazine for the design of electronic journals PE-AR.
About
This project is open-source alternative for other proprietary platform.
It is base on Arduino - CPU AVR ATmega328. This device is designed for wireless comunication and long run on battery.
Using
directories contain
- arduino - example program for arduino - wiring language
- pcb - scheme in Kicad and pcb
Scheme

3D view of device
First model from year 2014.


warduxere DPS v2

Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | CONN_1 | 1PIN_SMDxx | A2, A2, A2, A2, A3, A3, A3, A3, A4, A4, A4, A4, A5, A5, A5, A5 +28 |
| 20 | CONN_1 | 1PIN_SMDx | 1w-data1, 1w-data1, 1w-data1, 1w-data1, 1w-gnd1, 1w-gnd1, 1w-gnd1, 1w-gnd1, 1w-vcc1, 1w-vcc1, 1w-vcc1, 1w-vcc1, term+1, term+1, term+1, term+1 +4 |
| 12 | 100n | c_1206 | C1, C1, C1, C1, C2, C2, C2, C2, C3, C3, C3, C3 |
| 12 | 10k | SM1206 | R2, R2, R2, R2, R4, R4, R4, R4, R5, R5, R5, R5 |
| 8 | CONN_1 | 1PIN_SMD | BAT-1, BAT-1, BAT-1, BAT-1, BAT+1, BAT+1, BAT+1, BAT+1 |
| 4 | 10K | SM1206 | R6, R6, R6, R6 |
| 4 | 10u | c_1206 | C4, C4, C4, C4 |
| 4 | 330R | SM1206 | R1, R1, R1, R1 |
| 4 | 4k7 | SM1206 | R3, R3, R3, R3 |
| 4 | ATMEGA328P-A | TQFP32 | IC2, IC2, IC2, IC2 |
| 4 | CONN_3 | GS3 | K1, K1, K1, K1 |
| 4 | LED | LED-1206 | D1, D1, D1, D1 |
| 4 | MCP1700 3.3V | sot23 | U1, U1, U1, U1 |
| 4 | MCP6042 | SO8E | OP1, OP1, OP1, OP1 |
| 4 | SI4432 | si4432 | WIRELESS1, WIRELESS1, WIRELESS1, WIRELESS1 |
| 4 | UART-USB | PINHEAD1-6x | P1, P1, P1, P1 |
More from josefjebavy/warduxere
1- 2 layers

Similar boards
- 4 layers52.5 × 59.7 mm

ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0 - 2 layers83.8 × 50.8 mm

Shunt charge controller
grillbaer/solar-power-supply
Solar power harvesting for micro controller projects with li-Ion battery and highly efficient charge controller
16 parts3MIT - 2 layers138 × 162 mm

Remora Nucleo F446ZE Hat
ben-jacobson/RemoraNucleoHatPCB
Cost-effective, customisable LinuxCNC motion control unit.
179 parts1GPL-3.0 - 2 layers99.1 × 99.1 mm

Messplatine
PhyPiDAQ/EducatorsGuide
Tutorial for educators and examples of educational physics experiments
51 parts1BSD-2-Clause - 2 layers100 × 75 mm

- 2 layers80 × 110 mm

NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers50.5 × 128.5 mm

- 2 layers152 × 88 mm

RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222
Questions
What parts does the Warduxere append use?
140 parts, built around the ATMEGA328P-AU and MCP6042-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Warduxere append KiCad files?
From the josefjebavy/warduxere repository on GitHub, at the commit this page was made from: the board is pcb/warduxere-append.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Warduxere append design in my own project?
Its repository states no licence, so its author keeps all rights: ask josefjebavy before reusing the design.