Skip to the content
12345678

MCP6002-I/SN

Microchip TechnologyJLCPCB preferred

-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
microchip/MCP6002-I/SN
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
84,947 at JLCPCB (C7377)
Used on
15 open-source boards

Overview

The MCP6002-I/SN is an operational Amplifier made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (4ms_IC:MCP6002, from 4ms) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 84,947 are in stock at JLCPCB (part C7377). 15 open-source boards in 10 repositories on GitHub use it.

Symbol

12-3+
4ms_IC:MCP6002From 4ms

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

9
Supply, least
1.8 V · VDD, recommended operating min · p. 2
Supply, most
5.5 V · VDD, recommended operating max · p. 2
Supply, absolute maximum
7 V · VDD - VSS, absolute max · p. 2
Works from
-40 °C · TA, industrial grade min · p. 3
Works up to
85 °C · TA, industrial grade max · p. 3
Junction, hottest
150 °C · junction temperature absolute max · p. 2
Takes working
200 µA · sum of two amplifiers' typical IQ, IO = 0, VDD = 5.5V, VCM = 5V · p. 2
A pin gives at most
30 mA · output pin source or sink absolute max · p. 2
Junction to air (8L-SOIC (150 mil))
163 K/W · junction to ambient typical · p. 3

What it is and has

3
Gain bandwidth product
1 MHz typical · p. 1
Input/output
Rail-to-rail · p. 1
Phase margin
90° typical · p. 1

Specifications

29
ParameterConditionsAs printedPage
VDD - VSSmax 7 V2
输入引脚电流±2 mAmin -2 · max 2 mA2
输出引脚和供电引脚电流±30 mAmin -30 · max 30 mA2
储存温度min -65 · max 150 °C2
最大结温 (TJ) TJmax 150 °C2
所有引脚 ESD 保护 (HBM;MM)HBMmin 4 kV2
所有引脚 ESD 保护 (HBM;MM)MMmin 200 V2
输入失调电压 VOSVCM = VSS (注 1)min -4.5 · max 4.5 mV2
输入失调温度漂移 ∆VOS/∆TATA = -40°C 至 +125°C, VCM = VSS; typical magnitude ±2.0typ 2 uV/°C2
电源抑制比 PSRRVCM = VSStyp 86 dB2
输入偏置电流: IBTA = +25°C; typical magnitude ±1.0typ 1 pA2
工业温度范围 IBTA = +85°Ctyp 19 pA2
输入失调电流 IOSTypical magnitude ±1.0typ 1 pA2
共模抑制比 CMRRVCM = -0.3V至5.3V, VDD = 5Vmin 60 · typ 76 dB2
DC 开环增益 (大信号) AOLVOUT = 0.3V 至 VDD - 0.3V, VCM = VSSmin 88 · typ 112 dB2
输出短路电流 ISCVDD = 1.8V; typical magnitude ±6typ 6 mA2
输出短路电流 ISCVDD = 5.5V; typical magnitude ±23typ 23 mA2
电源电压 VDDmin 1.8 · max 5.5 V2
每个放大器的静态电流 IQPer amplifier; IO = 0, VDD = 5.5V, VCM = 5Vmin 50 · typ 100 · max 170 uA2
增益带宽积 GBWPtyp 1 MHz3
相位容限 PMG = +1typ 90 °3
转换速率 SRtyp 0.6 V/us3
输入噪声电压 Enif = 0.1 Hz 至 10 Hztyp 6.1 uVp-p3
输入噪声电压密度 enif = 1 kHztyp 28 nV/√Hz3
输入噪声电流密度 inif = 1 kHztyp 0.6 fA/√Hz3
工业温度范围 TAIndustrial grademin -40 · max 85 °C3
工作温度范围 TA注: industrial-grade devices may operate in the extended range with degraded performancemin -40 · max 125 °C3
储存温度范围 TAmin -65 · max 150 °C3
热阻 , 8L-SOIC (150 mil) θJA8L-SOIC (150 mil)typ 163 °C/Ω3

Pins, by the datasheet

8
1 VOUTA
Amplifier A output. · p. 1
2 VINA–
Amplifier A inverting input. · p. 1
3 VINA+
Amplifier A noninverting input. · p. 1
4 VSS
Negative supply. · p. 1
5 VINB+
Amplifier B noninverting input. · p. 1
6 VINB–
Amplifier B inverting input. · p. 1
7 VOUTB
Amplifier B output. · p. 1
8 VDD
Positive supply. · p. 1

Open-source boards using it

15See all 15
  • 4 layers100 × 83 mmModule17-Mainboard, the printed circuit board in 3D

    Module17-Mainboard

    M17-Project/Module_17

    M17 modem board for 9600-baud capable radios

    209 parts129CERN-OHL-W-2.0
  • 4 layers95 × 55 mmGalvanik, the printed circuit board in 3D

    Galvanik

    viridivn/galvanik

    OSHW galvanic hair electrolysis device

    103 parts2
  • 4 layers100 × 100 mmDaisyBoard, the printed circuit board in 3D

    DaisyBoard

    levi2234/ChimeraMultiFX

    ChimeraMultiFX is a dual-MCU effects pedal platform. The Daisy Seed handles audio DSP while the ESP32 manages controls, Wi-Fi, and the browser-based UI.

    142 parts1MIT
  • 2 layers68.6 × 53.3 mmMie1001 daq board, the printed circuit board in 3D

    Mie1001 daq board

    Chaospossum/mie1001-daq

    MIE1001 Team 5: DAQ firmware and Arduino shield designs (preamp, ADS1115, MCP4725)

    40 parts
  • 6 layers160 × 100 mmCourant.before colored actual models 20260918T190457, the printed circuit board in 3D

    Courant.before colored actual models 20260918T190457

    KrasForge/Courant

    A 2D finite-difference physical-modeling synthesis engine in structural VHDL: a vibrating membrane/plate/gong solved on FPGA fabric, with a nonlinear chaos term, playable polyphonically over MIDI/CV.

    199 partsMIT
  • 2 layers60 × 40 mmSensor interface, the printed circuit board in 3D

    Sensor interface

    limatthew01-hue/analog-front-end-lab

    A 60 × 40 mm, two-layer board for connecting two slow, positive voltage signals to a NUCLEO-F401RE. Each channel has a 2:1 resistor divider, an MCP6002 voltage follower, and a 10 kΩ / 1 µF output filter.

    18 parts
  • 8 layers140.9 × 163.4 mmGrandMarquis97 RevA, the printed circuit board in 3D

    GrandMarquis97 RevA

    thomasparlette/BoardLayout

    This repository contains the active R10 eight-layer KiCad candidate for a custom controller in a 1997 Mercury Grand Marquis EEC-V enclosure. The design is still ROUTINGINCOMPLETE.

    246 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6002-I/SN?

Yes. The symbol is 4ms_IC:MCP6002 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6002-I/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6002-I/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6002-I/SN?

JLCPCB lists it as part C7377, with 84,947 in stock; the sellers' links on this page open their listings.

What can replace the MCP6002-I/SN?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6002-I/SN?

15 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.