Skip to the content
12345678

MCP2562FD-E/SN

Microchip TechnologyExtended

-40℃~+125℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHS

Part id
microchip/MCP2562FD-E/SN
Category
CAN Transceivers
Package
SOIC-8
Pins
8
In stock
2,947 at JLCPCB (C511335)
Used on
8 open-source boards

Overview

The MCP2562FD-E/SN is a CAN Transceiver made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (MCP2562FDT_SOIC:MCP2562FDT_SOIC, from Antmicro) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 2,947 are in stock at JLCPCB (part C511335). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

1TXD2GND3VCC4RXD5VIO6CAN_L7CAN_H8STDBY
MCP2562FDT_SOIC:MCP2562FDT_SOICFrom Antmicro

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

12
Supply, least
4.5 V · VDD, recommended operating min · p. 9
Supply, most
5.5 V · VDD, recommended operating max · p. 9
Supply, least
1.8 V · VIO, recommended operating min · p. 9
Supply, absolute maximum
7 V · VDD, absolute max · p. 8
Works from
-40 °C · Extended (E) ambient min · p. 1
Works up to
125 °C · Extended (E) ambient max · p. 1
Junction, hottest
190 °C · Virtual junction temperature absolute max · p. 8
Takes working
45.09 mA · sum of VDD and VIO typical dominant supply currents, VTXD = 0V · p. 9
Takes at most
70.5 mA · sum of VDD and VIO max dominant supply currents, VTXD = 0V · p. 9
Takes asleep
5 µA · Standby typical, MCP2562FD; includes IIO · p. 9
Data rate, most
5 Mbit/s · Bit frequency max · p. 13
Junction to air (8L-SOIC)
149.5 K/W · Junction to ambient typical · p. 16

What it is and has

10
CAN FD operation
2, 5 and 8 Mbps · p. 1
Maximum propagation delay
120 ns · p. 1
Loop delay symmetry
-10%/+10% at 2 Mbps · p. 1
VIO
Internal level shifter on digital I/O pins · p. 1
Protection
Permanent dominant detection on TXD · p. 1
Protection
Permanent dominant detection on bus · p. 1
Protection
Automatic thermal shutdown · p. 1
System voltage suitability
12V and 24V systems · p. 1
Package options
PDIP-8L, SOIC-8L and 3x3 DFN-8L · p. 1
Temperature grade
Extended (E): -40°C to +125°C · p. 1

Specifications

79
ParameterConditionsAs printedPage
VDD VDDmax 7 V8
VIO VIOmax 7 V8
DC Voltage at TXD, RXD, STBY and VSSMaximum: VIO + 0.3Vmin -0.3 V8
DC Voltage at CANH, CANL and SPLITmin -58 · max 58 V8
Transient Voltage on CANH, CANLISO-7637; See Figure 2-5min -150 · max 100 V8
Storage temperaturemin -55 · max 150 °C8
Operating ambient temperaturemin -40 · max 150 °C8
Virtual Junction Temperature TVJIEC60747-1min -40 · max 190 °C8
Soldering temperature of leads10 secondsmax 300 °C8
ESD protection on CANH and CANL pins for MCP2562FDMCP2562FD; IEC 61000-4-2min -8 · max 8 kV8
ESD protection on CANH and CANL pinsIEC 801; Human Body Modelmin -8 · max 8 kV8
ESD protection on all other pinsIEC 801; Human Body Modelmin -4 · max 4 kV8
ESD protection on all pinsIEC 801; Machine Modelmin -300 · max 300 V8
ESD protection on all pinsIEC 801; Charge Device Modelmin -750 · max 750 V8
Voltage Range VDDVDD Pin; Extended (E)min 4.5 · max 5.5 V9
Supply Current IDDRecessive; VTXD = VDDtyp 5 · max 10 mA9
Supply Current IDDDominant; VTXD = 0Vtyp 45 · max 70 mA9
Standby Current IDDSMCP2562FD; Includes IIOtyp 5 · max 15 uA9
High Level of the POR Comparator VPORHmin 3.8 · max 4.3 V9
Low Level of the POR Comparator VPORLmin 3.4 · max 4 V9
Hysteresis of POR Comparator VPORDmin 0.3 · max 0.8 V9
Digital Supply Voltage Range VIOVIO Pinmin 1.8 · max 5.5 V9
Supply Current on VIO IIORecessive; VTXD = VIOtyp 4 · max 30 uA9
Supply Current on VIO IIODominant; VTXD = 0Vtyp 85 · max 500 uA9
Standby Current IDDSVIO Pin; Note 1: Characterized; not 100% testedtyp 0.3 · max 1 uA9
Undervoltage detection on VIO VUVD(IO)Note 1: Characterized; not 100% testedtyp 1.2 V9
CANH; CANL: Recessive Bus Output Voltage VO(R)VTXD = VDD; No load; typical = 0.5VDDmin 2 · max 3 V9
CANH; CANL: Bus Output Voltage in Standby VO(S)STBY = VTXD = VDD; No loadmin -0.1 · typ 0 · max 0.1 V9
Recessive Output Current IO(R)-24V < VCAN < +24Vmin -5 · max 5 mA9
CANH: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 2.75 · typ 3.5 · max 4.5 V9
CANL: Dominant Output Voltage VO(D)RL = 50 to 65min 0.5 · typ 1.5 · max 2.25 V9
Symmetry of Dominant Output Voltage (VDD – VCANH – VCANL) VO(D)(M)VTXD = VSS; Note 1min -400 · typ 0 · max 400 mV9
Dominant: Differential Output Voltage VO(DIFF)VTXD = VSS; RL = 50 to 65; Figure 2-2, Figure 2-4min 1.5 · typ 2 · max 3 V9
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDD; Figure 2-2, Figure 2-4min -120 · typ 0 · max 12 mV9
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDD, no load; Figure 2-2, Figure 2-4min -500 · typ 0 · max 50 mV9
CANH: Short Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floatingmin -120 · typ 85 mA10
CANH: Short Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floating; VDD=5V, TAMB = 25°C; Note 1min -100 mA10
CANL: Short Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floatingtyp 75 · max 120 mA10
CANL: Short Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floating; VDD=5V, TAMB = 25°C; Note 1max 100 mA10
Recessive Differential Input Voltage VDIFF(R)(I)Normal Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3min -1 · max 0.5 V10
Recessive Differential Input Voltage VDIFF(R)(I)Standby Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3min -1 · max 0.4 V10
Dominant Differential Input Voltage VDIFF(D)(I)Normal Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3; maximum = VDDmin 0.9 V10
Dominant Differential Input Voltage VDIFF(D)(I)Standby Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3; maximum = VDDmin 1 V10
Differential Receiver Threshold VTH(DIFF)Normal Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3min 0.5 · typ 0.7 · max 0.9 V10
Differential Receiver Threshold VTH(DIFF)Standby Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3min 0.4 · max 1.15 V10
Differential Input Hysteresis VHYS(DIFF)Normal mode, see Figure 2-6; Note 1min 50 · max 200 mV10
Common Mode Input Resistance RINNote 1min 10 · max 30 k10
Common Mode Resistance Matching RIN(M)VCANH = VCANL; Note 1min -1 · typ 0 · max 1 %10
Differential Input Resistance RIN(DIFF)Note 1min 10 · max 100 k10
Common Mode Input Capacitance CIN(CM)VTXD = VDD; Note 1max 20 pF10
Differential Input Capacitance CIN(DIFF)VTXD = VDD; Note 1max 10 pF10
CANH, CANL: Input Leakage ILIVDD = VTXD = VSTBY = 0V; MCP2562FD, VIO = 0V; VCANH = VCANL = 5 Vmin -5 · max 5 uA10
Low-Level Input Voltage VILTXD, STBY; maximum = 0.3VIOmin -0.3 V11
High-Level Input Current IIHTXD, STBYmin -1 · max 1 uA11
TXD: Low-Level Input Current IIL(TXD)min -270 · typ -150 · max -30 uA11
STBY: Low-Level Input Current IIL(STBY)min -30 · max -1 uA11
Low-Level Output Voltage VOLRXD; IOL = 4 mA; typical 8 mAmax 0.4 V11
Shutdown Junction Temperature TJ(SD)-12V < V(CANH, CANL) < +12V; Note 1min 165 · typ 175 · max 185 °C11
Shutdown Temperature Hysteresis TJ(HYST)-12V < V(CANH, CANL) < +12V; Note 1min 20 · max 30 °C11
Bit Time tBITmin 0.2 · max 69.44 us13
Bit Frequency fBITmin 14.4 · max 5000 kHz13
Delay TXD Low to Bus Dominant tTXD-BUSONNote 1: Characterized, not 100% testedtyp 65 ns13
Delay TXD High to Bus Recessive tTXD-BUSOFFNote 1: Characterized, not 100% testedtyp 90 ns13
Delay Bus Dominant to RXD tBUSON-RXDNote 1: Characterized, not 100% testedtyp 60 ns13
Delay Bus Recessive to RXD tBUSOFF-RXDNote 1: Characterized, not 100% testedtyp 65 ns13
Propagation Delay TXD to RXD tTXD - RXDRL = 60; CL = 100 pFtyp 90 · max 120 ns13
Propagation Delay TXD to RXD tTXD - RXDRL = 120; CL = 200 pF; Note 1typ 120 · max 180 ns13
Recessive bit time on RXD - 2 Mbps, Loop Delay Symmetry tBIT(RXD),2MtBIT(TXD) = 500 ns; see Figure 2-10; RL = 60; CL = 100 pFmin 450 · typ 485 · max 550 ns13
Recessive bit time on RXD - 2 Mbps, Loop Delay Symmetry tBIT(RXD),2MtBIT(TXD) = 500 ns; see Figure 2-10; RL = 120; CL = 200 pF; Note 1min 400 · typ 460 · max 550 ns13
Recessive bit time on RXD - 5 Mbps, Loop Delay Symmetry tBIT(RXD),5MtBIT(TXD) = 200 ns; see Figure 2-10min 160 · typ 185 · max 220 ns13
Recessive bit time on RXD - 8 Mbps, Loop Delay Symmetry tBIT(RXD),8MtBIT(TXD) = 120 ns; see Figure 2-10; Note 1min 85 · typ 105 · max 140 ns13
Delay Bus Dominant to RXD (Standby mode) tFLTR(WAKE)Standby modemin 0.5 · typ 1 · max 4 us13
Delay Standby to Normal Mode tWAKENegative edge on STBYmin 5 · typ 25 · max 40 us13
Permanent Dominant Detect Time tPDTTXD = 0Vtyp 1.25 ms13
Permanent Dominant Timer Reset tPDTRThe shortest Recessive pulse on TXD or CAN bus to reset Permanent Dominant Timertyp 100 ns13
Specified Temperature Range TAExtended (E)min -40 · max 125 C16
Operating Temperature Range TAmin -40 · max 150 C16
Storage Temperature Range TAmin -65 · max 155 C16
Thermal Resistance, 8L-SOIC JA8L-SOICtyp 149.5 C/W16

Pins, by the datasheet

8
1 TXD
Transmit Data Input; connect to the CAN controller transmitter data output. · p. 4
2 VSS
Ground. · p. 4
3 VDD
Supply Voltage for the transmitter and receiver, including the wake-up receiver. · p. 4
4 RXD
Receive Data Output; high for Recessive bus state and low for Dominant bus state. · p. 4
5 VIO
Digital I/O Supply Pin. · p. 4
6 CANL
CAN Low-Level Voltage I/O. · p. 4
7 CANH
CAN High-Level Voltage I/O. · p. 4
8 STBY
Standby Mode Input; selects Normal or Standby mode. · p. 4

Open-source boards using it

8
  • 4 layers65 × 56.5 mmCANopy, the printed circuit board in 3D

    CANopy

    taciturnaxolotl/CANopy

    can hat design for raspberry pis

    42 parts1
  • 4 layers94 × 72.8 mmMain board v2, the printed circuit board in 3D

    Main board v2

    BlueJayRacing/22xt_kicad

    As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

    163 parts
  • 4 layers66.7 × 66.2 mmSTM32G474 Dev v3, the printed circuit board in 3D

    STM32G474 Dev v3

    Rennaafi/stm32g474-dev-board

    4-layer STM32G474RE dev board (Nucleo-64 headers, USB-C, CAN-FD, STDC14) designed in KiCad 9: schematic, PCB layout, Gerbers & BOM

    77 partsMIT
  • 4 layers250 × 90 mmVCU V2, the printed circuit board in 3D

    VCU V2

    shutianx180/mk12-vcu-pcb

    366 parts
  • 8 layersFoc control, the printed circuit board in 3D

    Foc control

    sujaygouda123/foc-control

    BLDC field-oriented-control board for a humanoid robot actuator. KiCad 10, Ø80 mm, 8 layers, 1.6 mm.

    104 parts
  • 4 layers96.4 × 65.3 mmMain board v1, the printed circuit board in 3D

    Main board v1

    BlueJayRacing/22xt_kicad

    As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

    160 parts
  • 4 layers85 × 73 mmMain board v3, the printed circuit board in 3D

    Main board v3

    BlueJayRacing/22xt_kicad

    As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

    137 parts
  • 2 layers120 × 64 mmSensor module, the printed circuit board in 3D

    Sensor module

    HasiKe/Hayabusa

    Eigenbau-Motorsteuerung und Umbauprojekte für die Suzuki Hayabusa der ersten Generation (1999–2007).

    138 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2562FD-E/SN?

Yes. The symbol is MCP2562FDT_SOIC:MCP2562FDT_SOIC and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2562FD-E/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP2562FD-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2562FD-E/SN?

JLCPCB lists it as part C511335, with 2,947 in stock; the sellers' links on this page open their listings.

What can replace the MCP2562FD-E/SN?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2562FD-E/SN?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.