
Neotron Common Hardware
Neotron-Compute/Neotron-Common-Hardware
Contains KiCad footprints and symbols shared across multiple Neotron projects.
Microchip TechnologyExtended
-40℃~+125℃ 1.8V~5.5V 10MHz 16 Interrupt Output Reset function、Cascading and address extension SPI DIP-28 I/O Expanders ROHS
The MCP23S17-E/SP is an i, O Expander made by Microchip Technology in a DIP-28 package with 28 pins. -40℃~+125℃ 1.8V~5.5V 10MHz 16 Interrupt Output Reset function、Cascading and address extension SPI DIP-28 I/O Expanders ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP23S17-E_SO, from EasyEDA) and its footprint (Package_DIP:DIP-28_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 20 are in stock at JLCPCB (part C148096). 6 open-source boards in 6 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GPB0 | Input/output |
| 2 | GPB1 | Input/output |
| 3 | GPB2 | Input/output |
| 4 | GPB3 | Input/output |
| 5 | GPB4 | Input/output |
| 6 | GPB5 | Input/output |
| 7 | GPB6 | Input/output |
| 8 | GPB7 | Input/output |
| 9 | VDD | Unspecified |
| 10 | VSS | Unspecified |
| 11 | CS# | Unspecified |
| 12 | SCK | Unspecified |
| 13 | SI | Unspecified |
| 14 | SO | Unspecified |
| 15 | A0 | Unspecified |
| 16 | A1 | Unspecified |
| 17 | A2 | Unspecified |
| 18 | RESET# | Unspecified |
| 19 | INTB | Unspecified |
| 20 | INTA | Unspecified |
| 21 | GPA0 | Input/output |
| 22 | GPA1 | Input/output |
| 23 | GPA2 | Input/output |
| 24 | GPA3 | Input/output |
| 25 | GPA4 | Input/output |
| 26 | GPA5 | Input/output |
| 27 | GPA6 | Input/output |
| 28 | GPA7 | Input/output |

Neotron-Compute/Neotron-Common-Hardware
Contains KiCad footprints and symbols shared across multiple Neotron projects.

dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.

Neotron-Compute/Neotron-Expansion-Template
Example Neotron Expansion card

gloveboxes/pcb-z80
pcb-z80 is a container-only, repeatable build of the four-layer Z80 ROMless SBC PCB engineering design. It regenerates the KiCad schematic, places the four-layer board, routes a fresh Specctra session, imports and fills…


RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
Yes. The symbol is EasyEDA_Cloud:MCP23S17-E_SO and the footprint Package_DIP:DIP-28_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
DIP-28, with 28 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C148096, with 20 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the MCP23S18-E/SP by Microchip Technology, the MCP23S17-E/SS by Microchip Technology, the MCP23S17T-E/ML by Microchip Technology and the MCP23S08-E/SO by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.