
MCP23S18-E/SP
Microchip TechnologyExtended
-40℃~+125℃ 1.8V~5.5V 10MHz Interrupt Output SPI PDIP-28 I/O Expanders ROHS
- Part id
- microchip/MCP23S18-E/SP
- Category
- I, O Expanders
- Package
- PDIP-28
- Pins
- 28
- In stock
- 0 at JLCPCB (C185653)
- Used on
- 1 open-source board
Overview
The MCP23S18-E/SP is an i, O Expander made by Microchip Technology in a PDIP-28 package with 28 pins. -40℃~+125℃ 1.8V~5.5V 10MHz Interrupt Output SPI PDIP-28 I/O Expanders ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP23S18-E_SP, from EasyEDA) and its footprint (Package_DIP:DIP-28_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C185653). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | VSS | Unspecified |
| 2 | NC | Unspecified |
| 3 | GPB0 | Unspecified |
| 4 | GPB1 | Unspecified |
| 5 | GPB2 | Unspecified |
| 6 | GPB3 | Unspecified |
| 7 | GPB4 | Unspecified |
| 8 | GPB5 | Unspecified |
| 9 | GPB6 | Unspecified |
| 10 | GPB7 | Unspecified |
| 11 | VDD | Unspecified |
| 12 | CS# | Unspecified |
| 13 | SCK | Unspecified |
| 14 | SI | Unspecified |
| 15 | SO | Unspecified |
| 16 | RESET# | Unspecified |
| 17 | NC | Unspecified |
| 18 | INTB | Unspecified |
| 19 | INTA | Unspecified |
| 20 | GPA0 | Unspecified |
| 21 | GPA1 | Unspecified |
| 22 | GPA2 | Unspecified |
| 23 | GPA3 | Unspecified |
| 24 | GPA4 | Unspecified |
| 25 | GPA5 | Unspecified |
| 26 | GPA6 | Unspecified |
| 27 | GPA7 | Unspecified |
| 28 | NC | Unspecified |
Open-source boards using it
1- 4 layers243.8 × 171.5 mm

Parts like it
8MCP23S17-E/SP
DIP-28-40℃~+125℃ 1.8V~5.5V 10MHz 16 Interrupt Output Reset function、Cascading and address extension SPI DIP-28 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersMCP23S17-E/SS
SSOP-28-208mil-40℃~+125℃ 1.8V~5.5V 10MHz 16 Interrupt Output Reset function、Cascading and address extension SPI SSOP-28-208mil I/O Expanders ROHSMicrochip TechnologyI/O ExpandersMCP23S17T-E/ML
QFN-28-EP(6x6)-40℃~+125℃ 1.8V~5.5V 10MHz 16 1uA 600mV 8 8mA Interrupt Output Reset function、Cascading and address extension SPI QFN-28-EP(6x6) I/O Expanders ROHSMicrochip TechnologyI/O ExpandersMCP23S08-E/SO
SOIC-18-300mil-40℃~+125℃ 10MHz 1uA 3mA 4 4.5V~5.5V 8 8.5mA Interrupt Output Reset function、Cascading and address extension SPI SOIC-18-300mil I/O Expanders ROHSMicrochip TechnologyI/O ExpandersMCP23S08-E/SS
SSOP-20-208mil-40℃~+125℃ 10MHz 1uA 4 4.5V~5.5V 600mV 8 Interrupt Output Reset function、Cascading and address extension SPI SSOP-20-208mil I/O Expanders ROHSMicrochip TechnologyI/O ExpandersXD71055
DIP-40-40℃~+85℃ 24 4mA 50uA 5V 8MHz、10MHz Interrupt Output Parallel port Tri-State Gate DIP-40 I/O Expanders ROHSXINLUDAI/O ExpandersMCP23S09-E/P
PDIP-18-40℃~+125℃ 1.8V~5.5V 10MHz Interrupt Output Reset function、Cascading and address extension SPI PDIP-18 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersMCP23S09-E/MG
QFN-16-EP(3x3)-40℃~+125℃ 1.8V~5.5V 10MHz 25mA Interrupt Output Reset function、Cascade and address expansion SPI QFN-16-EP(3x3) I/O Expanders ROHSMicrochip TechnologyI/O Expanders
Questions
Is there a KiCad symbol and footprint for the MCP23S18-E/SP?
Yes. The symbol is EasyEDA_Cloud:MCP23S18-E_SP and the footprint Package_DIP:DIP-28_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP23S18-E/SP?
PDIP-28, with 28 pins. Its footprint is drawn on this page.
Where is the MCP23S18-E/SP datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP23S18-E/SP?
JLCPCB lists it as part C185653, with 0 in stock; the sellers' links on this page open their listings.
What can replace the MCP23S18-E/SP?
Parts like it in the library: the MCP23S17-E/SP by Microchip Technology, the MCP23S17-E/SS by Microchip Technology, the MCP23S17T-E/ML by Microchip Technology and the MCP23S08-E/SO by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP23S18-E/SP?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.