Skip to the content
12345678

ATTINY13A-SSH

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Programmable watchdog SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY13A-SSH
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C1339822)
Used on
2 open-source boards

Overview

The ATTINY13A-SSH is a microcontroller made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Programmable watchdog SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny13A-SS, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1339822). 2 open-source boards in 1 repository on GitHub use it.

Symbol

1RESET/PB52PB33PB44GND5PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny13A-SSFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the ATTINY13A-SSH
PinNameType
1RESET/PB5Input/output
2PB3Input/output
3PB4Input/output
4GNDPower in
5PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

2
  • 2 layers50.5 × 28.5 mmBlinkySWR-0.1, the printed circuit board in 3D

    BlinkySWR-0.1

    bubnikv/BlinkySWR

    Tiny, cheap, simple, accurate, self powered resistive SWR and power meter for SOTA and back packers

    47 parts23GPL-2.0
  • 2 layers34.5 × 26.5 mmBlinkySWR-0.2-S, the printed circuit board in 3D

    BlinkySWR-0.2-S

    bubnikv/BlinkySWR

    Tiny, cheap, simple, accurate, self powered resistive SWR and power meter for SOTA and back packers

    46 parts23GPL-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY13A-SSH?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny13A-SS and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY13A-SSH?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY13A-SSH datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY13A-SSH?

JLCPCB lists it as part C1339822, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY13A-SSH?

Parts like it in the library: the ATTINY13A-SSU by Microchip Technology, the PIC12F1822-I/SN by Microchip Technology, the ATTINY202-SSN by Microchip Technology and the PIC12F675-I/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY13A-SSH?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.