Skip to the content
12345678910111213141516

MAX232ACSE+

Maxim Integrated (Analog Devices)Extended

0℃~+70℃ 120Kbps 2 2 5V 5mA Transceiver Yes SOIC-16 RS232 ICs ROHS

Part id
maxim/MAX232ACSE+
Category
RS232 ICs
Package
SOIC-16
Pins
16
In stock
1,554 at JLCPCB (C143392)
Used on
6 open-source boards

Overview

The MAX232ACSE+ is a RS232 IC made by Maxim Integrated (Analog Devices) in a SOIC-16 package with 16 pins. 0℃~+70℃ 120Kbps 2 2 5V 5mA Transceiver Yes SOIC-16 RS232 ICs ROHS.

PCBKit's library has its KiCad symbol (Interface_UART:MAX232, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,554 are in stock at JLCPCB (part C143392). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1C1+2VS+3C1-4C2+5C2-6VS-7T2OUT8R2IN9R2OUT10T2IN11T1IN12R1OUT13R1IN14T1OUT15GND16VCC
Interface_UART:MAX232From KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

Pinout

16
The pins of the MAX232ACSE+
PinNameType
1C1+Passive
2VS+Power out
3C1-Passive
4C2+Passive
5C2-Passive
6VS-Power out
7T2OUTOutput
8R2INInput
9R2OUTOutput
10T2INInput
11T1INInput
12R1OUTOutput
13R1INInput
14T1OUTOutput
15GNDPower in
16VCCPower in

Open-source boards using it

6
  • 2 layers99.9 × 99.9 mmEasy z80, the printed circuit board in 3D

    Easy z80

    skiselev/easy_z80

    An easy to build Zilog Z80 based single board computer

    61 parts180GPL-3.0
  • 2 layers100 × 80 mmMini8085, the printed circuit board in 3D

    Mini8085

    skiselev/minimax8085

    Simple Intel 8085 based Single Board Computer (SBC)

    45 parts60GPL-3.0
  • 2 layers53.3 × 66 mmBulkyMIDI-32 Amiga, the printed circuit board in 3D

    BulkyMIDI-32 Amiga

    tebl/BulkyMIDI-32

    A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.

    23 parts80CC-BY-SA-4.0
  • 2 layers53.3 × 66 mmBulkyMIDI-32 Amiga IDC, the printed circuit board in 3D

    BulkyMIDI-32 Amiga IDC

    tebl/BulkyMIDI-32

    A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.

    25 parts80CC-BY-SA-4.0
  • 2 layers100 × 100 mmBulkyMIDI-32 Extras, the printed circuit board in 3D

    BulkyMIDI-32 Extras

    tebl/BulkyMIDI-32

    A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.

    68 parts80CC-BY-SA-4.0
  • 2 layers36.8 × 44.5 mmPontag, the printed circuit board in 3D

    Pontag

    hkzlab/pontag

    PONTAG is an active adapter that converts a mouse using PS/2 protocol into an RS232 mouse (Microsoft protocol), commonly used on IBM XT/AT and compatibles.

    32 parts9

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX232ACSE+?

Yes. The symbol is Interface_UART:MAX232 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX232ACSE+?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Where is the MAX232ACSE+ datasheet?

Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.

Where can I order the MAX232ACSE+?

JLCPCB lists it as part C143392, with 1,554 in stock; the sellers' links on this page open their listings.

What can replace the MAX232ACSE+?

Parts like it in the library: the SP3232EEN-L/TR by MaxLinear, the SP3232EEN(UMW) by UMW, the MAX3232EID by Texas Instruments and the MAX3232ESE(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX232ACSE+?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.