Skip to the content
123

LM7809CT

HGSEMIExtended

0℃~+125℃@(Ta) 1 1.5A 35V 56dB@(120Hz) 58uV 9V Fixed Positive Short Circuit Protection、Thermal shutdown TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
hgsemi/LM7809CT
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220-3
Pins
3
In stock
865 at JLCPCB (C7432225)
Used on
12 open-source boards

Overview

The LM7809CT is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by HGSEMI in a TO-220-3 package with 3 pins. 0℃~+125℃@(Ta) 1 1.5A 35V 56dB@(120Hz) 58uV 9V Fixed Positive Short Circuit Protection、Thermal shutdown TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AZ7027RTR-G1, from EasyEDA) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. 865 are in stock at JLCPCB (part C7432225). 12 open-source boards in 12 repositories on GitHub use it.

Symbol

3OUT2GND1VCC
EasyEDA_Cloud:AZ7027RTR-G1From EasyEDA

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the LM7809CT
PinNameType
1VCCUnspecified
2GNDUnspecified
3OUTUnspecified

Open-source boards using it

12See all 12
  • 2 layers99.7 × 99.7 mmXpressoSmoothie, the printed circuit board in 3D

    XpressoSmoothie

    TopherMan/XpressoSmoothie

    A Smoothie-compatible board with a modular design.

    129 parts7GPL-3.0
  • 2 layers63.5 × 53.3 mmLaserProjector, the printed circuit board in 3D

    LaserProjector

    yaqwsx/LaserProjector

    Fancy driver for cheap Chinese laser galvos based on ESP32

    67 parts6MIT
  • 2 layers203.2 × 135.9 mmPreamp, the printed circuit board in 3D

    Preamp

    oco2000/AVRForth

    Forth for AVR microcontrollers

    75 parts4GPL-3.0
  • 2 layersAmplificador, the printed circuit board in 3D

    Amplificador

    nachocarballeda/gclass_amplifier

    Diseño de un amplificador clase G para la materia Circuitos Electronicos 2. FIUBA

    92 parts3
  • 2 layers99.1 × 99.1 mmSwitch electronics, the printed circuit board in 3D

    Switch electronics

    dmsherazi/Battery-Management-System

    Solar-battery charge regulator

    95 parts1GPL-3.0
  • 2 layers70 × 70 mmPcbv1, the printed circuit board in 3D

    Pcbv1

    mdiepart/Drone

    Drone's code and PCB

    15 parts
  • 2 layers162.6 × 63.5 mmPitot, the printed circuit board in 3D

    Pitot

    tommy2pq5/kicad

    33 parts
  • 2 layers645.9 × 78.2 mmAnalog esr meter esr meter rev a, the printed circuit board in 3D

    Analog esr meter esr meter rev a

    PCBench/PCBench

    resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…

    71 parts21MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM7809CT?

Yes. The symbol is EasyEDA_Cloud:AZ7027RTR-G1 and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM7809CT?

TO-220-3, with 3 pins. Its footprint is drawn on this page.

Where is the LM7809CT datasheet?

HGSEMI publishes it: the Datasheet link on this page opens it.

Where can I order the LM7809CT?

JLCPCB lists it as part C7432225, with 865 in stock; the sellers' links on this page open their listings.

What can replace the LM7809CT?

Parts like it in the library: the LM7909CT by HGSEMI, the KIA7809AP-U/PK by KEC, the L7809ABV-DG by STMicroelectronics and the LM2940CT-9.0 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM7809CT?

12 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.