

Pitot
- Size
- 162.6 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 33
- Pads
- 133
- Tracks, vias
- 164, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Apr 2017
- Updated
- 5 Apr 2017
Overview
Pitot is an open-source printed circuit board by tommy2pq5, from the tommy2pq5/kicad repository on GitHub. It is a 2-layer board of 162.6 × 63.5 mm with 33 parts on 33 nets, routed with 164 tracks and 0 vias.
It is built around the LTC1144CN8#PBF and LM7809CT. Its parts include 12 resistors, 8 capacitors, 6 ICs, 4 connectors and 3 diodes.
Main components
2LTC1144CN8#PBF
PDIP-8-18V~-2V 0℃~+70℃ 10kHz 2V~18V 35uA 56Ω 93% Inverted Not supported PDIP-8 Charge Pumps ROHSAnalog DevicesDC-DC ConvertersLM7809CT
TO-220-30℃~+125℃@(Ta) 1 1.5A 35V 56dB@(120Hz) 58uV 9V Fixed Positive Short Circuit Protection、Thermal shutdown TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHGSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R | Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 6 | C | Capacitors_ThroughHole:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4, C5, C6, C7, C8 |
| 3 | DIL8 | Housings_DIP:DIP-8_W7.62mm | P1, P2, P3 |
| 3 | LT1167CN8PBF | Housings_DIP:DIP-8_W7.62mm | IC1, IC2, IC3 |
| 3 | R | Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R11, R12 |
| 3 | ZENER | Discret:D3 | D1, D2, D3 |
| 2 | CP | Capacitors_ThroughHole:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1, C2 |
| 1 | CONN_01X04 | Connect:Grove_1x04 | P4 |
| 1 | DEV-11114 | Housings_DIP:DIP-24_W7.62mm | IC5 |
| 1 | LM7809CT | Power_Integrations:TO-220 | U1 |
| 1 | LTC1144CN8#PBF | Housings_DIP:DIP-8_W7.62mm | IC4 |
More from tommy2pq5/kicad
1- 2 layers73.7 × 63.5 mm

Similar boards
- 2 layers99.7 × 99.7 mm

XpressoSmoothie
TopherMan/XpressoSmoothie
A Smoothie-compatible board with a modular design.
129 parts7GPL-3.0 - 2 layers63.5 × 53.3 mm

LaserProjector
yaqwsx/LaserProjector
Fancy driver for cheap Chinese laser galvos based on ESP32
67 parts6MIT - 2 layers203.2 × 135.9 mm

- 2 layers

Amplificador
nachocarballeda/gclass_amplifier
Diseño de un amplificador clase G para la materia Circuitos Electronicos 2. FIUBA
92 parts3 - 2 layers99.1 × 99.1 mm

- 2 layers70 × 70 mm

- 2 layers645.9 × 78.2 mm

Analog esr meter esr meter rev a
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
71 parts21MIT - 2 layers117.2 × 47.5 mm

KicadDesign
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
16 parts1
Questions
How big is the Pitot PCB?
It measures 162.6 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pitot use?
33 parts, built around the LTC1144CN8#PBF and LM7809CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pitot KiCad files?
From the tommy2pq5/kicad repository on GitHub, at the commit this page was made from: the board is pitot/pitot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pitot design in my own project?
Its repository states no licence, so its author keeps all rights: ask tommy2pq5 before reusing the design.