Skip to the content
123

LM7909CT

HGSEMIExtended

-20℃~+125℃@(Ta) 1 1.5A 1.5V@(1A) 190uV 25V 5mA 60dB@(120Hz) 9V Fixed Negative Over Current Protection、Short Circuit Protection、Thermal shutdown TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
hgsemi/LM7909CT
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220-3
Pins
3
In stock
426 at JLCPCB (C22446593)
Used on
5 open-source boards

Overview

The LM7909CT is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by HGSEMI in a TO-220-3 package with 3 pins. -20℃~+125℃@(Ta) 1 1.5A 1.5V@(1A) 190uV 25V 5mA 60dB@(120Hz) 9V Fixed Negative Over Current Protection、Short Circuit Protection、Thermal shutdown TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. 426 are in stock at JLCPCB (part C22446593). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

2IN3OUT1GND
Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the LM7909CT
PinNameType
1GNDPower in
2INPower in
3OUTPower out

Open-source boards using it

5
  • 2 layers63.5 × 53.3 mmLaserProjector, the printed circuit board in 3D

    LaserProjector

    yaqwsx/LaserProjector

    Fancy driver for cheap Chinese laser galvos based on ESP32

    67 parts6MIT
  • 2 layersAmplificador, the printed circuit board in 3D

    Amplificador

    nachocarballeda/gclass_amplifier

    Diseño de un amplificador clase G para la materia Circuitos Electronicos 2. FIUBA

    92 parts3
  • 2 layers175 × 85 mmGain box psu pcb, the printed circuit board in 3D

    Gain box psu pcb

    carmisergio/denon-preout-mod

    PCB designs and firmware for the Denon AVR-X1300W Pre-out mod

    80 parts
  • 2 layers80 × 58.4 mmPod 1702A 2708, the printed circuit board in 3D

    Pod 1702A 2708

    DuPAL-PAL-DUmper/DuPAL_Board

    This repository contains the KiCad files and the gerber files for the DuPAL boards.

    15 parts57CC-BY-SA-4.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM7909CT?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM7909CT?

TO-220-3, with 3 pins. Its footprint is drawn on this page.

Where is the LM7909CT datasheet?

HGSEMI publishes it: the Datasheet link on this page opens it.

Where can I order the LM7909CT?

JLCPCB lists it as part C22446593, with 426 in stock; the sellers' links on this page open their listings.

What can replace the LM7909CT?

Parts like it in the library: the LM7809CT by HGSEMI, the KIA7809AP-U/PK by KEC, the L7809ABV-DG by STMicroelectronics and the LM2940CT-9.0 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM7909CT?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.