Skip to the content
123

BAT54SLT1G

DOWOExtended

Part id
dowo/BAT54SLT1G
Category
Schottky Diodes
Package
SOT-23
Pins
3
In stock
27,074 at JLCPCB (C27636109)
Used on
11 open-source boards

Overview

The BAT54SLT1G is a schottky Diode made by DOWO in a SOT-23 package with 3 pins.

PCBKit's library has its KiCad symbol (Diode:BAT54S, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 27,074 are in stock at JLCPCB (part C27636109). 11 open-source boards in 11 repositories on GitHub use it.

Symbol

1A2K3COM
Diode:BAT54SFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the BAT54SLT1G
PinNameType
1APassive
2KPassive
3COMPassive

Open-source boards using it

11See all 11
  • 4 layers130 × 25 mmCurrent sense, the printed circuit board in 3D

    Current sense

    westonb/little-bee-B1

    A high performance current & magnetic field probe

    113 parts331CC-BY-SA-4.0
  • 4 layers138.2 × 200.4 mmHV servo drive v1, the printed circuit board in 3D

    HV servo drive v1

    ExcessiveMotion/drive-hardware

    383 parts175CERN-OHL-W-2.0
  • 2 layers9.7 × 9.8 mmG6 Mag Charger, the printed circuit board in 3D

    G6 Mag Charger

    kicker22004/Dexcom-G6-Mag-Recharge

    Board and steps for creating a rechargeable Dexcom device.

    13 parts5
  • 8 layers64 × 56 mmPS GAN-60W, the printed circuit board in 3D

    PS GAN-60W

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    89 parts4MIT
  • 2 layers90 × 85 mmMultiBench, the printed circuit board in 3D

    MultiBench

    M-Mrk/MultiBench

    A bench multimeter with the usual functions, but also with usb connectivity to log, stream and monitor readings.

    87 parts1
  • 2 layers120 × 49 mmSensor hat, the printed circuit board in 3D

    Sensor hat

    mikedahlgren/Pool-Controller

    This runs a pool from a Waveshare ESP32-S3-RELAY-6CH and the PoolVeras sensor hat plugged onto its Pico headers.

    69 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BAT54SLT1G?

Yes. The symbol is Diode:BAT54S and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BAT54SLT1G?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the BAT54SLT1G datasheet?

DOWO publishes it: the Datasheet link on this page opens it.

Where can I order the BAT54SLT1G?

JLCPCB lists it as part C27636109, with 27,074 in stock; the sellers' links on this page open their listings.

What can replace the BAT54SLT1G?

Parts like it in the library: the BAT54S by MDD, the BAT54S by hongjiacheng, the BAT54S by GOODWORK and the BAT54S by SEP. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BAT54SLT1G?

11 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.