

Pluskbd
Scalable OS for 6502/65816
- Size
- 351.8 × 144.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 104
- Pads
- 733
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2015
- Updated
- 26 May 2025
Overview
Pluskbd is an open-source printed circuit board by zuiko21, from the zuiko21/minimOS repository on GitHub, published under the MIT licence. It is a 2-layer board of 351.8 × 144.1 mm with 123 parts on 104 nets.
It is built around the 74HC245D, 74HC595 and 74HC138, with the 74HC174D, 74HC238D and 74HC574D among its other parts. Its parts include 57 switches, 20 diodes, 12 ICs, 6 connectors and 3 resistors.
Main components
874HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers74HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, Decoders74HC174D
SOIC-16-40℃~+125℃ 1 107MHz 28ns@6V,50pF 2V~6V 3.5pF 5.2mA 5.2mA 6 74HC Series 8uA D-Type Reset Rising Edge SOIC-16 Flip Flops ROHSNexperiaFlip Flops74HC238D
SOP-16SOP-16 Signal Switches, Multiplexers, Decoders ROHSMDDSignal Switches, Multiplexers, Decoders74HC574D
SOP-20L-40℃~+125℃ 1 13ns 15ns@6V,50pF 2.7V~6V 20uA 28MHz 5ns 6.5pF 7.8mA 7.8mA 74HC Series 8 D-Type Enable Rising Edge Tri-State SOP-20L Flip Flops ROHSMDDFlip Flops74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops74HC86D
SO-14-40℃~+125℃ 1.5V~4.2V 20ns@6V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series XOR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
README
README.mdThis project is under the MIT License, see LICENSE for details.
minimOS
Please note that this doc is OBSOLETE. Read about updated details in the new architecture.md file.
Minimalistic, portable, scalable Operating System for everything from embedded devices to (quasi) full-featured desktop computers!
Purpose
Currently in a VERY early development stage, hopefully will become a common reference platform for deployment of computer-related appliances -- think about embedded systems, like the original intent: an Actual Exposure Time Meter for classic photographic cameras. But by virtue of its modularity and scalability would equally serve to a whole breed of home-made, retro-inspided computers.
Future ports
Initial target is the venerable 65(C)02 and its big brother, the 16-bit enabled 65816 (port known as minimos·16) which will keep compatibility with existing '02 code. But other ports to many CPU architectures are in mind, like the Motorola 68xx / Hitachi 63xx series (minimOS·63, with the interesting 6809/6309 branch as minimOS·69), 680x0 (minimOS·68), 8080/8085/Z80 (minimOS·80), even (God forbid! :-) the commonly used x86 (minimOS·86). I really have little-to-no knowledge about this CPU family, nor about the usual IBM-based PC architecture; hopefully someone will be able to port minimOS without too much of a chore, that would give a very interesting 'breath' to (otherwise useless) older PCs.
Supported architectures
This section has been moved to the hardware section
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 4148 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 4 | 74HC245 | Package_DIP:DIP-20_W7.62mm_Socket | U3, U5, U101, U102 |
| 3 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 2 | 22K | Resistor_THT:R_Array_SIP9 | RN2, RN101 |
| 2 | 22n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 74HC595 | Package_DIP:DIP-16_W7.62mm_Socket | U201, U202 |
| 2 | IOx | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J2, J3 |
| 1 | 0 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW10 |
| 1 | 1 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | 2 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | 3 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW3 |
| 1 | 3K3 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 4 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW4 |
| 1 | 5 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW5 |
| 1 | 6 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW6 |
| 1 | 7 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW7 |
| 1 | 74HC138 | Package_DIP:DIP-16_W7.62mm_Socket | U1 |
| 1 | 74HC174 | Package_DIP:DIP-16_W7.62mm_Socket | U103 |
| 1 | 74HC238 | Package_DIP:DIP-16_W7.62mm_Socket | U4 |
| 1 | 74HC574 | Package_DIP:DIP-20_W7.62mm_Socket | U2 |
| 1 | 74HC74 | Package_DIP:DIP-14_W7.62mm_Socket | U6 |
| 1 | 74HC86 | Package_DIP:DIP-14_W7.62mm_Socket | U9 |
| 1 | 8 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW8 |
| 1 | 9 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW9 |
| 1 | < | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW48 |
| 1 | A | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW21 |
| 1 | ACUTE | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW55 |
| 1 | APOS | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW49 |
| 1 | B | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW36 |
| 1 | BKSP | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB | SW58 |
| 1 | C | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW34 |
| 1 | CAPS | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW47 |
| 1 | CAPS LOCK | LED_THT:LED_D3.0mm | D19 |
| 1 | COMMA | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW52 |
| 1 | D | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW23 |
| 1 | DEL | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW57 |
| 1 | DOT | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW56 |
| 1 | DOWN | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW63 |
| 1 | E | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW13 |
| 1 | ENTER | Button_Switch_Keyboard:SW_Cherry_MX_ISOEnter_PCB | SW30 |
| 1 | ESC | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW41 |
| 1 | F | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW24 |
| 1 | G | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW25 |
| 1 | GRAVE | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW50 |
| 1 | H | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW26 |
| 1 | I | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW18 |
| 1 | IEXCL | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW53 |
| 1 | J | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW27 |
| 1 | K | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW28 |
| 1 | L | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW29 |
| 1 | L-ALT | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW39 |
| 1 | LCTRL | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW44 |
| 1 | LEFT | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW62 |
| 1 | LEGACY | LED_THT:LED_D3.0mm | D20 |
| 1 | LSHIFT | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW31 |
| 1 | Logo_Open_Hardware_Small | durango:j300 | LOGO2 |
| 1 | M | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW38 |
| 1 | MD/VCS | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | MD/VCS1 | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J101 |
| 1 | MD/VCS2 | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J102 |
| 1 | MINUS | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW60 |
| 1 | N | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW37 |
| 1 | NES 1 | durango:NES gamepad | J201 |
| 1 | NES 2 | durango:NES gamepad | J202 |
| 1 | O | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW19 |
| 1 | ORD | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW45 |
| 1 | P | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW20 |
| 1 | PGDN | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW43 |
| 1 | PGUP | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW42 |
| 1 | PLUS | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW54 |
| 1 | Q | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW11 |
| 1 | R | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW14 |
| 1 | R-ALT | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW65 |
| 1 | RCTRL | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW67 |
| 1 | RIGHT | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW64 |
| 1 | RSHIFT | Button_Switch_Keyboard:SW_Cherry_MX_2.75u_PCB | SW66 |
| 1 | S | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW22 |
| 1 | SPACE | Button_Switch_Keyboard:SW_Cherry_MX_6.25u_PCB | SW40 |
| 1 | T | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW15 |
The 111 most common of 123 parts.
More from zuiko21/minimOS
12- 2 layers177.8 × 130.8 mm

- 2 layers177.8 × 130.8 mm

- 2 layers250.8 × 130.2 mm

- 2 layers

- 2 layers177.8 × 130.8 mm

- 2 layers

- 2 layers99.7 × 63.5 mm

- 2 layers

- 2 layers97.8 × 72.4 mm

- 2 layers97.8 × 72.4 mm

- 2 layers80 × 63.5 mm

- 2 layers97.8 × 72.4 mm

Similar boards
- 4 layers188 × 128.3 mm

- 2 layers369.6 × 127.6 mm
/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
- 2 layers299.7 × 198.1 mm

Cisc-8
nailed-barnacle/Cisc-8-ttl-processor
A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder
319 parts1MIT - 2 layers208 × 110 mm

- 2 layers200 × 150 mm

- 2 layers284.9 × 96.5 mm

- 2 layers142.2 × 99.1 mm

- 2 layers233.4 × 280 mm

Questions
How big is the Pluskbd PCB?
It measures 351.8 × 144.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pluskbd use?
123 parts, built around the 74HC245D, 74HC595, 74HC138 and 74HC174D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pluskbd KiCad files?
From the zuiko21/minimOS repository on GitHub, at the commit this page was made from: the board is hard/kicad/pluskbd/pluskbd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pluskbd design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).