Skip to the content
2 layers77 × 115 mmZAIR, the printed circuit board in 3D

MicroMouse Build !

Size
77 × 115 mm
Copper layers
2
Thickness
1.6 mm
Parts
68
Nets
82
Pads
243
Tracks, vias
781, 87
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Oct 2026
Updated
17 Oct 2026

Overview

ZAIR is an open-source printed circuit board by zischl, from the zischl/ZAIR repository on GitHub. It is a 2-layer board of 77 × 115 mm with 68 parts on 82 nets, routed with 781 tracks and 87 vias.

It is built around the STM32F405RGT6 and AMS1117-3.3. Its parts include 23 resistors, 13 capacitors, 10 transistors, 8 diodes and 7 ICs. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

🐭 ZAIR - 4WD Vacuum Micromouse

A custom 4WD vacuum micromouse built for the Sri Lanka IIT Micro Maze 3.0 competition (IEEE 16×16).

The PCB also serves as the robot's structural chassis, with cutouts for the drive wheels and a central aperture for a 1020 coreless motor suction fan.

ZAIR PCB 3D Render


📸 PCB

Top (Components)Bottom
Traces / SilkscreenOutline & Cutouts

⚡ Hardware & Components

  • MCU: STM32F405RGT6 (ARM Cortex-M4 @ 168MHz)
  • Drive Motors: 2× Coreless 1718 motors
  • Motor Driver: TB6612FNG breakout (red module)
  • Vacuum Fan: Coreless 1020 motor switched by an AO3400 N-MOSFET + SS14 flyback diode
  • IMU: LSM6DSV breakout (SPI2)
  • Encoders: 2× MT6701 magnetic encoders (vertical 90° mounts, ABZ quadrature mode to TIM2/TIM3)
  • Sensors: 4 active IR pairs (TEFT4300 phototransistors + SFH4545 850nm emitters, pulsed via AO3400 FETs)
  • Power:
    • 2S LiPo (7.4V nominal)
    • MP2307 Mini360 buck converter stepped down to 3.5V for the vacuum motor
    • AMS1117-3.3 for 3.3V logic
  • Programming / Debug: 7-pin header for SWD (SWDIO, SWDCK, SWO) and USART1 (TX, RX)

🛠️ PCB Specs & Files

Designed in KiCad.

  • Layers: 2-layer FR4
  • Dimensions: ~80mm × 115mm (1.6mm thickness, 1oz copper)
  • Silkscreen: White

Files


⚙️ Drivetrain CAD

Designed in Onshape. A 3-gear direct-drive setup where the central Coreless 1718 motor pinion meshes simultaneously with both geared wheels.

3-Gear MeshDrivetrain Assembly

STEP Models (hardware/cad/)

Parts

68
QtyValueFootprintReferences
1410kResistor_SMD:R_0603_1608MetricR1, R2, R4, R6, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22
633Resistor_SMD:R_0603_1608MetricR7, R8, R9, R10, R11, R12
5100nFCapacitor_SMD:C_0603_1608MetricC7, C8, C9, C10, C16
210uFCapacitor_SMD:C_0603_1608MetricC1, C2
22.2uFCapacitor_SMD:C_0603_1608MetricC14, C15
220pFCapacitor_SMD:C_0603_1608MetricC11, C12
10R/10RResistor_SMD:R_0603_1608MetricR23
1100uFCapacitor_SMD:CP_Elec_6.3x5.4C13
11uFCapacitor_SMD:C_0603_1608MetricC17
122kResistor_SMD:R_0603_1608MetricR3
1330Resistor_SMD:R_0603_1608MetricR5
18MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmX1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1AO3400_DIAGPackage_TO_SOT_SMD:SOT-23Q10
1AO3400_FRONTPackage_TO_SOT_SMD:SOT-23Q8
1AO3400_SIDEPackage_TO_SOT_SMD:SOT-23Q9
1AO3400_VACPackage_TO_SOT_SMD:SOT-23Q1
1LED_BLUELED_SMD:LED_0603_1608MetricD1
1LSM6DSV-BREAKOUTZAIR:LSM6DSV_BreakoutU2
1MOT_LEFTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1MOT_RIGHTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1MP2307-MINI360-MODULEZAIR:MP2307_Mini360_BuckU7
1MT6701-L-01355ZAIR:MT6701_BreakoutU3
1MT6701-R-01355ZAIR:MT6701_BreakoutU4
1SFH4545_DLLED_THT:LED_D3.0mmD6
1SFH4545_DRLED_THT:LED_D3.0mmD7
1SFH4545_FLLED_THT:LED_D3.0mmD2
1SFH4545_FRLED_THT:LED_D3.0mmD3
1SFH4545_LLED_THT:LED_D3.0mmD4
1SFH4545_RLED_THT:LED_D3.0mmD5
1SS14_FLYBACKDiode_SMD:D_SMAD8
1STM32F405RGT6Package_QFP:LQFP-64_10x10mm_P0.5mmU1
1SWD_UART_SWOConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ7
1TB6612FNG-BREAKOUTZAIR:TB6612FNG_Breakout_RedU8
1TEFT4300_DLLED_THT:LED_D3.0mmQ6
1TEFT4300_DRLED_THT:LED_D3.0mmQ7
1TEFT4300_FLLED_THT:LED_D3.0mmQ2
1TEFT4300_FRLED_THT:LED_D3.0mmQ3
1TEFT4300_LLED_THT:LED_D3.0mmQ4
1TEFT4300_RLED_THT:LED_D3.0mmQ5
1USER_BTNConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW1
1VAC_MOTORConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1VBAT_INConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

Similar boards

  • 2 layers59.1 × 99.9 mmCheap FOCer 2 60mm, the printed circuit board in 3D

    Cheap FOCer 2 60mm

    shamansystems/Cheap-FOCer-2

    Low-Cost Motor Controller based on the VESC 6

    193 parts407
  • 4 layers75.2 × 99.5 mmFOC, the printed circuit board in 3D

    FOC

    nordstream3/FOC

    Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…

    261 parts81
  • 4 layers50.8 × 83.8 mmF405 breakout, the printed circuit board in 3D

    F405 breakout

    JordanAceto/STM32F405RGT6_breakout_board

    breakout board for stm32f405

    38 parts3CC-BY-4.0
  • 4 layers132.5 × 105 mmHEXCORE PCB Design v0, the printed circuit board in 3D

    HEXCORE PCB Design v0

    JoshCrouch/HEXCORE

    HEXCORE is a Hexapod-type robot that includes both a custom remote as well as vision system making use of 2.4GHz RF and WiFi respectively.

    160 parts3
  • 4 layers50 × 50 mmSTM32F4 Breakout, the printed circuit board in 3D

    STM32F4 Breakout

    PhilCarPi/STM32F4_Breakout_Board

    4 layer PCB that serves as a breakout board to an STM32F405 chip with an additional IMU chip just for fun. The breakout is for serial ports SPI, USART, I2C, and SWD.

    56 parts2
  • 2 layers71.8 × 48.5 mmJOLT V1, the printed circuit board in 3D

    JOLT V1

    GoTouchGra55/J.O.L.T

    12 degrees of freedom, 1 custom devboard, and 0 off-the-shelf solutions. JOLT is a quadruped robot built entirely from scratch.

    73 parts1MIT
  • 4 layersSTM32F405RGT6-Breakout, the printed circuit board in 3D

    STM32F405RGT6-Breakout

    MURPHYENGINEERING/STM32F405RGT6-Breakout

    Following along with Phil's Lab: https://www.youtube.com/watch?v=t5phi3nT8OU

    62 parts1
  • 4 layers50 × 50 mmSTM32-DevBoard, the printed circuit board in 3D

    STM32-DevBoard

    s-grundner/STM32-DevBoard

    STM32 Breakout Board with various Sensors

    106 parts1

Questions

How big is the ZAIR PCB?

It measures 77 × 115 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ZAIR use?

68 parts, built around the STM32F405RGT6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ZAIR KiCad files?

From the zischl/ZAIR repository on GitHub, at the commit this page was made from: the board is hardware/schematic/ZAIR/ZAIR.kicad_pcb and its schematic hardware/schematic/ZAIR/ZAIR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ZAIR design in my own project?

Its repository states no licence, so its author keeps all rights: ask zischl before reusing the design.