

Dock connection board
ZeroPhone mod board PCB files
- Size
- 33 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 14
- Pads
- 46
- Tracks, vias
- 66, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2017
- Updated
- 19 Apr 2019
Overview
Dock connection board is an open-source printed circuit board by ZeroPhone, from the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 33 × 27.9 mm with 14 parts on 14 nets, routed with 66 tracks and 3 vias.
It is built around the 24LC32A/P. Its parts include 7 connectors, 1 capacitor, 1 resistor and 1 IC.
Main components
1README
README.mdZeroPhone-Mod-PCBs
ZeroPhone mod board PCB files
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 24LC32 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | ADC | Connect:GS2 | JP3 |
| 1 | ANI | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
| 1 | AUXI | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | CHG | Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | CUVCC | Connect:GS2 | JP1 |
| 1 | I2CI | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J4 |
| 1 | I2CO | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J7 |
| 1 | USBI | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J2 |
| 1 | USBO | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |
| 1 | WP | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1 |
| 1 | ZUVCC | Connect:GS2 | JP2 |
More from ZeroPhone/ZeroPhone-Mod-PCBs
12- 2 layers35.6 × 30.5 mm

- 2 layers

- 2 layers17 × 36.8 mm

- 2 layers40 × 60 mm

- 2 layers40 × 60 mm

- 2 layers40 × 36 mm

- 2 layers36.5 × 31 mm

- 2 layers12.7 × 13.5 mm

- 2 layers26 × 17.2 mm

- 2 layers40 × 10 mm

- 2 layers40 × 27.5 mm

- 2 layers26 × 18 mm

Similar boards
- 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers66 × 99 mm

Nucleo32TNC
mobilinkd/NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.
54 parts110GPL-3.0 - 2 layers94.5 × 74.4 mm

Ax58100-stm32-ethercat
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
184 parts93 - 2 layers100 × 66.1 mm

PicoWiFiModem
mecparts/PicoWiFiModem
A Pico W based RS232 <-> WiFi modem with Hayes AT style commands and LED indicators
39 parts64GPL-3.0 - 2 layers32.1 × 41.2 mm

Ir signalgen lite
dilshan/ir-clone
Open-source infrared remote control signal analysis and generating tool
40 parts58MIT - 4 layers185 × 95 mm

EL Load Analog
fietser28/EL-Load
The DCL8010 electronic load module features a DC Electronic Load with several modes and protections. This project is the for the development boards for this project. There is a seperate git project for the firmware.
344 parts15 - 2 layers129.5 × 72.6 mm

- 4 layers33 × 50.8 mm

Questions
How big is the Dock connection board PCB?
It measures 33 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dock connection board use?
14 parts, built around the 24LC32A/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dock connection board KiCad files?
From the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, at the commit this page was made from: the board is dock_connection_board/dock_connection_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dock connection board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).