
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

Small breakout pcb for the Spin Semi FV-1 DSP chip
Fv1 board is an open-source printed circuit board by JordanAceto, from the JordanAceto/fv1_breakout_board repository on GitHub. It is a 4-layer board of 33 × 50.8 mm with 50 parts on 34 nets, routed with 290 tracks and 33 vias.
It is built around the 24LC32A/P. Its parts include 23 capacitors, 15 resistors, 6 connectors, 3 ICs and 2 diodes.

| Task | Status |
|---|---|
| Schematic capture | ☑ |
| PCB layout | ☑ |
| Test build | ☑ |
| Safe to order boards | ☑ |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C16, C18, C20, C21, C22, C23 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R5, R9, R10, R11, R12, R13 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C6, C8, C15, C17, C19 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R6 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C13 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric | R8, R14, R15 |
| 2 | 1n COG | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 2n2 | Capacitor_SMD:C_0805_2012Metric | C7, C9 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 12p | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 24LC32 | Package_DIP:DIP-8_W7.62mm_Socket | U2 |
| 1 | 32768Hz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | DC_in | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | L78L33_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | cv_in | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | eeprom_prog_port | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | prog_sel | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | signal_in | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | signal_out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | spin_semi_fv1 | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U1 |

peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

mobilinkd/NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.

MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

mecparts/PicoWiFiModem
A Pico W based RS232 <-> WiFi modem with Hayes AT style commands and LED indicators

dilshan/ir-clone
Open-source infrared remote control signal analysis and generating tool

fietser28/EL-Load
The DCL8010 electronic load module features a DC Electronic Load with several modes and protections. This project is the for the development boards for this project. There is a seperate git project for the firmware.


It measures 33 × 50.8 mm and has 4 copper layers, 1.69 mm thick.
50 parts, built around the 24LC32A/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JordanAceto/fv1_breakout_board repository on GitHub, at the commit this page was made from: the board is kicad_6_docs/fv1_board.kicad_pcb and its schematic kicad_6_docs/fv1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JordanAceto before reusing the design.