

DAC80501-Budget Voltage Reference
A Programmable voltage reference using DAC80501
- Size
- 47.4 × 20.6 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 31
- Nets
- 23
- Pads
- 92
- Tracks, vias
- 209, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 May 2022
- Updated
- 19 May 2022
Overview
DAC80501-Budget Voltage Reference is an open-source printed circuit board by zemonkey, from the zemonkey/DAC80501-Budget-Voltage-Reference repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 47.4 × 20.6 mm with 31 parts on 23 nets, routed with 209 tracks and 13 vias.
It is built around the ICL7660N and OP07. Its parts include 11 capacitors, 5 resistors, 4 ICs, 3 connectors and 2 diodes.
Main components
2Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C8, C9, C10 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C11 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 20k | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV1, RV1 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_AE | J1 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | DAC80501MDGSR | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | ICL7660 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LM317L_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U1 |
| 1 | OP07 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J3 |
Similar boards
- 2 layers130 × 80 mm

- 2 layers118 × 103.5 mm

- 2 layers144.8 × 88.9 mm

- 2 layers256 × 121 mm

Forte PA Deck
SP6GK/Forte-600-HF-RF-Amplifier
Project of 600 W LDMOS amlifier based on 2xMRF300.
170 parts17GPL-3.0 - 2 layers71 × 51 mm

- 2 layers245.6 × 85.9 mm

- 2 layers114 × 95 mm

- 4 layers70 × 70.5 mm

PCB FINAL UPDATED
bash227/ECG-Motor-Control-Power-Management-PCB
A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.
111 parts2MIT
Questions
How big is the DAC80501-Budget Voltage Reference PCB?
It measures 47.4 × 20.6 mm and has 2 copper layers, 1.69 mm thick.
What parts does the DAC80501-Budget Voltage Reference use?
31 parts, built around the ICL7660N and OP07. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DAC80501-Budget Voltage Reference KiCad files?
From the zemonkey/DAC80501-Budget-Voltage-Reference repository on GitHub, at the commit this page was made from: the board is DAC80501 Budget Voltage Reference.kicad_pcb and its schematic DAC80501 Budget Voltage Reference.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DAC80501-Budget Voltage Reference design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).