4 layers86 × 34 mm
Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0
2 layers60 × 100 mm
EscPCB
zayinconde/escPCBThree-Phase Brushless Electronic Speed Controller (ESC) designed to drive and control an HW 3660 13.5T BLDC motor.
- Size
- 60 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 89
- Pads
- 290
- Tracks, vias
- 606, 222
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Nov 2024
- Updated
- 12 Dec 2024
Overview
EscPCB is an open-source printed circuit board by zayinconde, from the zayinconde/escPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 100 mm with 88 parts on 89 nets, routed with 606 tracks and 222 vias.
It is built around the RP2040, W25Q16JVSNIQ and BC847, with the BC857, ABM8-272-T3 and LM211N/HG among its other parts. Its parts include 27 resistors, 16 capacitors, 15 transistors, 6 connectors and 3 ICs. It belongs with the robots and motor control boards and the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q16JVSNIQ
SOIC-8-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 133MHz 16Mbit 2.7V~3.6V 20 Years 400us SPI SOIC-8 NOR FLASH ROHSWinbond ElecNOR FLASH
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
LM211N/HG
DIP-8-40℃~+85℃ 1.7nA 200ns 36V 45nA 5V~30V 700uV ±15V DIP-8 Comparators ROHSHGSEMIComparatorsXT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorised
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R25, R27 |
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C9, C10, C11, C12, C13, C14 |
| 9 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q6, Q7, Q8, Q9, Q13, Q14, Q15 |
| 6 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q10, Q11, Q12 |
| 4 | 33k | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R5, R6 |
| 3 | IPD70N | SPROGEE3:IPB70N12S311ATMA1 | AL1, BL1, CL1 |
| 3 | IPD70P | SPROGEE3:IPD70P04P4L08ATMA2 | AH1, BH1, CH1 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C15 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R19, R20 |
| 2 | 431183015816 | SPROGEE3:431183015816 | S1, S2 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R17, R18 |
| 2 | Conn_01x03_Pin | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J4, J5 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 100u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R26 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 2137160001 | SPROGEE3:MOLEX_2137160001 USB-C | J2 |
| 1 | ABM8-272-T3 | SPROGEE3:ABM8-272-T3_ABR | X1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J6 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LM211N | SPROGEE3:DIP-8_STM | CR1 |
| 1 | LOGO | LOGOS:SDU_Logo | G*** |
| 1 | LOGO | LOGOS:Raspberry_Pi_Logo | G*** |
| 1 | LOGO | LOGOS:JLCPCB_Logo | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels | JP3 |
| 1 | Terminal | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J1 |
| 1 | W25Q16JVSNIQ | SPROGEE3:W25Q | IC1 |
| 1 | XT60-M | SPROGEE3:AMASS_XT60-M | J3 |
The 87 most common of 88 parts.
Questions
How big is the EscPCB PCB?
It measures 60 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EscPCB use?
88 parts, built around the RP2040, W25Q16JVSNIQ, BC847 and BC857. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EscPCB KiCad files?
From the zayinconde/escPCB repository on GitHub, at the commit this page was made from: the board is Previous versions/escPCB v1.1/escPCB.kicad_pcb and its schematic Previous versions/escPCB v1.0/escPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EscPCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 64 mm
Rf power monitor rev2
TheKingOfChaos/RF-Power-Monitor
A 2-layer carrier board for the WIZnet W5500-EVB-Pico-PoE. It is 80 x 51.5 mm: exactly as long as the module, so both short edges line up with the module.
129 parts - 4 layers70 × 40 mm
Flight comp srad-2026
vito-pp/FlightComputer-SRAD-2026
HW and SW documentation of a Student Researched And Developed (SRAD) flight computer in charge of telemetry for ITBA's rocketry team 2026
86 parts3 - 4 layers70.8 × 68.5 mm
2026-finals hw
Freakness109/2026-finals-hw
500CHF / 40 = 12.5 CHF (- does not include PCBs themselves)
118 parts - 4 layers111.5 × 83.9 mm
SF2000
jbilander/SF2000
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).
160 parts33CC-BY-SA-4.0 - 6 layers150 × 87 mm
POWERCORE V2.0 MOTHERBOARD
Rack-Robotics/Powercore-V2.0
Open-Source wire EDM power supply by Rack Robotics, Inc.
254 parts258 - 4 layers55 × 73.5 mm
- 4 layers56 × 71.5 mm
Battery powered
homelith/pico-disp-ident
Custom firmware to make some RP2040 board working as DVI display tester & identifier
64 parts2MIT