
Gbg pcb
gobabygocarswithjoysticks/gbg-pcb
A PCB for controlling the motors in a go baby go car with joystick control

Nmkgmmd v10 brd is an open-source printed circuit board by yuqlid, from the yuqlid/nmkgmmd_v10_brd repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 69 mm with 155 parts on 114 nets, routed with 1,668 tracks and 324 vias.
It is built around the MCP16301-E/CH, PSMN1R0-40YLDX and BSS138, with the SKRPACE010 among its other parts. Its parts include 54 resistors, 38 capacitors, 20 connectors, 18 transistors and 11 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 10k | Resistors_SMD:R_0603 | R3, R11, R12, R13, R14, R16, R18, R19, R23, R24, R27, R28, R29, R30, R33, R34 +12 |
| 16 | 10 | Resistors_SMD:R_0603 | R21, R22, R25, R26, R31, R32, R35, R36, R39, R40, R43, R44, R49, R50, R53, R54 |
| 16 | PSMN1R0-40YLD | SMD_Packages:LFPAK56_SO8_SOT1023 | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17 |
| 14 | 0.1u | Capacitors_SMD:C_0603 | C1, C5, C6, C7, C8, C10, C13, C14, C17, C18, C23, C24, C25, C30 |
| 8 | C | Capacitors_SMD:C_0603 | C31, C32, C33, C34, C35, C36, C37, C38 |
| 8 | CONN_01X01 | Mounting_Holes:MountingHole_2.7mm_Pad_Via | J15, J16, J17, J18, J21, J22, J23, J24 |
| 5 | LED | LEDs:LED_0603 | D1, D2, D3, D4, D5 |
| 4 | 0.283u | Capacitors_SMD:C_0603 | C21, C22, C28, C29 |
| 4 | CONN_01X03 | Connectors_JST:JST_ZH_S03B-ZR_03x1.50mm_Angled | J2, J3, J7, J8 |
| 3 | 10u | Capacitors_SMD:C_0805 | C11, C12, C16 |
| 3 | 1k | Resistors_SMD:R_0603 | R7, R8, R9 |
| 2 | 0 | Resistors_SMD:R_0603 | R20, R38 |
| 2 | 14p | Capacitors_SMD:C_0603 | C2, C3 |
| 2 | 1u | Capacitors_SMD:C_0603 | C4, C9 |
| 2 | 470u | Capacitors_SMD:C_0603 | C19, C26 |
| 2 | 5.66u | Capacitors_SMD:C_0805 | C20, C27 |
| 2 | A4957 | SMD_Packages:Allegro_A4957_QFN-24-1EP_4x4mm_Pitch0.5mm | U4, U6 |
| 2 | ACS711 | Housings_DFN_QFN:QFN-12_3x3mm_Pitch0.5mm_With_Fused_Sensed_Current_Loop | U5, U7 |
| 2 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q18 |
| 2 | CONN_01X04 | Connectors_JST:JST_ZH_S04B-ZR_04x1.50mm_Angled | J4, J5 |
| 2 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.00mm_SMD_Pin1Left | J14, J20 |
| 2 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.00mm_SMD_Pin1Right | J9, J10 |
| 2 | D | Diodes_SMD:D_SOD-123 | D10, D11 |
| 2 | D | Diodes_SMD:D_SOD-323_HandSoldering | D8, D9 |
| 2 | D_Schottky | Diodes_SMD:D_SOD-123 | D6, D7 |
| 2 | L | Inductors_NEOSID:Neosid_Inductor_SM0603CG | L1, L2 |
| 2 | MCP16301 | TO_SOT_Packages_SMD:SOT-23-6 | U2, U3 |
| 2 | R | Resistors_SMD:R_0603 | R1, R2 |
| 1 | 15u | Choke_SMD:Choke_SMD_BOURNS-SRR4028-xxxY | L4 |
| 1 | 20u | Capacitors_SMD:C_0805 | C15 |
| 1 | 22u | Choke_SMD:Choke_SMD_BOURNS-SRR4028-xxxY | L3 |
| 1 | 31.6k | Resistors_SMD:R_0603 | R17 |
| 1 | 40k | Resistors_SMD:R_0603 | R10 |
| 1 | 52.3k | Resistors_SMD:R_0603 | R15 |
| 1 | CONN_01X04 | Connectors_JST:JST_ZH_B04B-ZR_04x1.50mm_Straight | J6 |
| 1 | CONN_01X05 | Connectors_JST:JST_SH_BM05B-SRSS-TB_05x1.00mm_Straight | J1 |
| 1 | Crystal | Crystals:NDK_Crystal_SMD_3225_2Pads | Y1 |
| 1 | SKRPACE010 | SMD_Packages:ALPS_SKRPAxE010 | SW1 |
| 1 | STM32F303CCTx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | SW_DPDT_x2 | Buttons_Switches_SMD:SW_SPDT_PCM12 | SW2 |

gobabygocarswithjoysticks/gbg-pcb
A PCB for controlling the motors in a go baby go car with joystick control

azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.



wiciu15/motoHUDsch
KiCad Schematic and PCB for motoHUD (https://github.com/wiciu15/motoHUDini)

opulo-inc/lumenpnp-archive
This repository is a public archive of the LumenPnP Pick and Place (formerly Index) source material from the beginning in mid-2020 until May 2022. The current source can be found at https://github.com/opulo-inc/lumenpnp

markus-k/led-controller-hardware
KiCAD schematics and design files for my LED controller.

It measures 85 × 69 mm and has 2 copper layers, 1.6 mm thick.
155 parts, built around the MCP16301-E/CH, PSMN1R0-40YLDX, BSS138 and SKRPACE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yuqlid/nmkgmmd_v10_brd repository on GitHub, at the commit this page was made from: the board is nmkgmmd_v10_brd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).