

TipLets Board
- Size
- 28.5 × 87.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 66
- Pads
- 161
- Tracks, vias
- 428, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Sep 2023
- Updated
- 3 Sep 2023
Overview
TipLets Board is an open-source printed circuit board by yunho-c, from the yunho-c/TipLets repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 28.5 × 87.5 mm with 41 parts on 66 nets, routed with 428 tracks and 22 vias.
It is built around the DRV2605LDGS and VG0640001D. Its parts include 12 capacitors, 12 resistors, 6 ICs and 4 connectors.
Main components
2README
README.mdTipLets
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 12 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 6 | DRV2605LDGS | DRV2605:DRV2605YFZR | U1, U2, U3, U4, U5, U6 |
| 6 | VG0640001D | Vybronics:VG0640001D | M1, M2, M3, M4, M5, M6 |
| 2 | Conn_01x08_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x14_MountingPin | Connector_PinHeader_2.00mm:PinHeader_2x07_P2.00mm_Vertical | J3, J4 |
| 1 | SMD_Battery_Clip | Keystone:BK5009 | B1 |
Similar boards
- 2 layers287.8 × 126.7 mm

- 6 layers50.2 × 77.2 mm

Meko
KOEGlike/meko
A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad
274 parts90GPL-3.0 - 2 layers71.1 × 24.1 mm

Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57 - 4 layers82.8 × 33 mm

E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power
162 parts22 - 2 layers55.6 × 71.2 mm

- 4 layers72 × 75 mm

Nrf52480 Dev board
brendena/Nordic_Pebble_Steel
The goal of this project is to replace the main motherboard in the pebble steel with newer parts. Specifically the cpu will be a Nordic NRF52840.
75 parts9 - 4 layers56 × 48 mm

- 4 layers25 × 50 mm

Print and Place PCB
ollyoid/Printegrated-Circuits
GCode post-processor for integrating PCBs into 3D prints
49 parts5
Questions
How big is the TipLets Board PCB?
It measures 28.5 × 87.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TipLets Board use?
41 parts, built around the DRV2605LDGS and VG0640001D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TipLets Board KiCad files?
From the yunho-c/TipLets repository on GitHub, at the commit this page was made from: the board is Board/TipLets_Board.kicad_pcb and its schematic Board/TipLets_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TipLets Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).