

Keyboardproj
custom keyboard
- Size
- 304.3 × 126.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 339
- Nets
- 225
- Pads
- 1,295
- Tracks, vias
- 2,451, 511
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jul 2026
- Updated
- 21 Jul 2026
Overview
Keyboardproj is an open-source printed circuit board by yifanh123, from the yifanh123/keyboard repository on GitHub. It is a 4-layer board of 304.3 × 126.9 mm with 339 parts on 225 nets, routed with 2,451 tracks and 511 vias.
It is built around the SS49E, CD74HC4067SM96 and M24C64-RMN6TP, with the SRV05-4, SK6812 and AP2112K-3.3 among its other parts. Its parts include 137 diodes, 100 capacitors, 22 ICs, 8 resistors and 3 switches. It belongs with the STM32 boards of this library.
Main components
6SS49E
TO-92S-0.7% -40℃~+100℃ 1.4mV/Gs 2.7V~6.5V 6mA ±100mT TO-92S Linear Hall Sensors ROHSHoneywellLinear Hall SensorsCD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersM24C64-RMN6TP
SOIC-8-40℃~+85℃ 1.8V~5.5V 1MHz 2.5mA 200 Years 3uA 4,000,000 Cycles 5ms 64Kbit Hardware write protection function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROMSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
README
README.mdKeyboard
Completely custom keyboard from scratch!
Features
- Custom Layout: 75% (about)
- Microcontroller: STM32
- Firmware: VIA
- Mounting Style: Integrated plate
- Connectivity: USB-C
- Extras: Per-key RGB, OLED Screen, Rotary Encoders, Hotswap Keys
PCB
- custom built on kicad
- integrated multiplexers with digital signals
Switches
- all basic switches are compatible, hotswapable
- currently have pinks on (best keys frfr)
- wooting lekker tikken mediums for HE switches (these are pretty good)
Keycaps
- Beautiful keycaps painted by my goats Kathleen and Truman (and me)
- 3D printed with PLA
Case & Plate
- all designed on onshape (pls sponsor me i need this)
Working on
- Currently major flaw in PCB design, as hall effect sensors are front mounted.
- PCB already manufactured :goff: improvise and adapt.
Parts
339| Qty | Value | Footprint | References |
|---|---|---|---|
| 77 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +61 |
| 60 | D | Diode_SMD:D_SOD-123 | D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +44 |
| 59 | SK6812 | LED_SMD:sk6812_reverse_1 | D1, D2, D10, D11, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +43 |
| 59 | SW_Push | Kailh:CPG151101S11_fixed | -1, ,1, ;1, .1, '1, /1, =1, ESC1, F1, F2, F3, F4, F8, F10, F11, F12 +43 |
| 19 | C | Capacitor_SMD:C_0603_1608Metric | C79, C80, C84, C85, C86, C87, C88, C89, C90, C91, C92, C93, C94, C95, C96, C100 +3 |
| 18 | SK6812 | LED_SMD:sk6812_reverse | D119, D120, D121, D122, D123, D124, D125, D126, D127, D128, D129, D130, D131, D132, D133, D134 +2 |
| 17 | SS49E | Package_TO_SOT_SMD:SOT-23 | U6, U7, U8, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22 +1 |
| 5 | , , , , | ||
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C78, C81 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U4, U5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C82 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C83 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | stab1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | M24C64-RMN6TP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | usb1 |
Similar boards
- 4 layers310 × 123 mm

- 2 layers139 × 113.5 mm

- 2 layers284.2 × 55.6 mm

- 2 layers

- 2 layers275.7 × 105.3 mm

Hector
RickKross/hector
Hector is a 38-key column staggered keyboard with HE magnetic sensors
224 parts18CERN-OHL-W-2.0 - 2 layers62.5 × 55.1 mm

Shield V1p2
FOSSEE/FLOSS-Arduino-Book
Book on Microcontroller Programming with Arduino and FLOSS
25 parts5 - 2 layers112.1 × 52.2 mm

Pcb phone controller
Inertie-Production/Phone-Controller
A simple slim gamepad/controller for any phone
43 parts5GPL-3.0 - 2 layers240 × 239.9 mm

KiCad chessLab
dev-campusfab/chessLab
Interactive Chess board that brings visuals to the game and can help the player to learn.
295 parts2AGPL-3.0
Questions
How big is the Keyboardproj PCB?
It measures 304.3 × 126.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Keyboardproj use?
339 parts, built around the SS49E, CD74HC4067SM96, M24C64-RMN6TP and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboardproj KiCad files?
From the yifanh123/keyboard repository on GitHub, at the commit this page was made from: the board is keyboardproj.kicad_pcb and its schematic keyboardproj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboardproj design in my own project?
Its repository states no licence, so its author keeps all rights: ask yifanh123 before reusing the design.