Skip to the content
4 layers55 × 90 mmKontakcount, the printed circuit board in 3D

hardware design repo

Size
55 × 90 mm
Copper layers
4
Thickness
1.6 mm
Parts
55
Nets
60
Pads
223
Tracks, vias
406, 96
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
24 Apr 2024
Updated
25 Apr 2024

Parts

55
QtyValueFootprintReferences
2010kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +4
610nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C5, C6
4D_SchottkyDiode_SMD:D_SMA_HandsolderingDpwr1, Dpwr2, ID1, ID2
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
347uFCapacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolderCpwr1, Cpwr2, Cpwr3
274HC165Package_SO:SOP-16_3.9x9.9mm_P1.27mmINPUT1, INPUT2
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBBTN1, BTN2
2WS2812LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mmRGB1, RGB2
10Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR23
1220uFCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolderCpwr4
133HInductor_SMD:L_12x12mm_H6mmL1
174HC595Package_SO:SOP-16_3.9x9.9mm_P1.27mmCHSEL1
1ESP32-C3_SUPERMINIxandy1:MODULE_ESP32-C3_SUPERMINI SMDESP32-C3
1LM2596S-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3BUCK1
1RFM95W-915S2RF_Module:HOPERF_RFM9XW_SMDLORA1
1SSD1315xandy1:SSD1315 I2C THTDISPLAY1
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmCFG1
1SW_DIP_x08Button_Switch_THT:SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mmCFG2
1SW_SPDTxandy1:POWERSWITCH SLIDE THTSWPWR1
1Screw_Terminal_01x02TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_HorizontalBAT1

Similar boards

  • 2 layers150 × 100 mmKettcar Control HW, the printed circuit board in 3D

    Kettcar Control HW

    CatoLynx/Kettcar_Control_HW

    Central controller for my hoverboard-powered Kettcar

    121 parts
  • 4 layers175 × 135 mmSystemboard, the printed circuit board in 3D

    Systemboard

    adrianhelfer/Autocast

    AirPlay Car Stereo

    208 parts
  • 2 layers59.1 × 31.6 mmCombo, the printed circuit board in 3D

    Combo

    rocket3989/KiCad

    personal kicad file storage

    18 parts4
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers171.5 × 106.7 mmSequencer, the printed circuit board in 3D

    Sequencer

    westlicht/performer-hardware

    PER|FORMER Eurorack Sequencer - Hardware Design Files

    435 parts110
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers208.9 × 170.8 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-3

    Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

    207 parts54
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36

Questions

How big is the Kontakcount PCB?

It measures 55 × 90 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Kontakcount use?

55 parts, built around the LM2596S-3.3, 74HC165D, WS2812 and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kontakcount KiCad files?

From the ydnax/kontaktcount repository on GitHub, at the commit this page was made from: the board is kontakcount.kicad_pcb and its schematic input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kontakcount design in my own project?

Its repository states no licence, so its author keeps all rights: ask ydnax before reusing the design.