
Kettcar Control HW
CatoLynx/Kettcar_Control_HW
Central controller for my hoverboard-powered Kettcar

hardware design repo
Kontakcount is an open-source printed circuit board by ydnax, from the ydnax/kontaktcount repository on GitHub. It is a 4-layer board of 55 × 90 mm with 55 parts on 60 nets, routed with 406 tracks and 96 vias.
It is built around the LM2596S-3.3, 74HC165D and WS2812, with the 74HC595 and RFM95W-915S2 among its other parts. Its parts include 21 resistors, 6 capacitors and 1 inductor. It belongs with the ESP32 and RISC-V boards of this library.
description goes here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +4 |
| 6 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 4 | D_Schottky | Diode_SMD:D_SMA_Handsoldering | Dpwr1, Dpwr2, ID1, ID2 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 47uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | Cpwr1, Cpwr2, Cpwr3 |
| 2 | 74HC165 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | INPUT1, INPUT2 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | BTN1, BTN2 |
| 2 | WS2812 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | RGB1, RGB2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | Cpwr4 |
| 1 | 33H | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | 74HC595 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | CHSEL1 |
| 1 | ESP32-C3_SUPERMINI | xandy1:MODULE_ESP32-C3_SUPERMINI SMD | ESP32-C3 |
| 1 | LM2596S-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | BUCK1 |
| 1 | RFM95W-915S2 | RF_Module:HOPERF_RFM9XW_SMD | LORA1 |
| 1 | SSD1315 | xandy1:SSD1315 I2C THT | DISPLAY1 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | CFG1 |
| 1 | SW_DIP_x08 | Button_Switch_THT:SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | CFG2 |
| 1 | SW_SPDT | xandy1:POWERSWITCH SLIDE THT | SWPWR1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | BAT1 |

CatoLynx/Kettcar_Control_HW
Central controller for my hoverboard-powered Kettcar



slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

slu4coder/Minimal-UART-Computer-3
Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
It measures 55 × 90 mm and has 4 copper layers, 1.6 mm thick.
55 parts, built around the LM2596S-3.3, 74HC165D, WS2812 and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ydnax/kontaktcount repository on GitHub, at the commit this page was made from: the board is kontakcount.kicad_pcb and its schematic input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ydnax before reusing the design.