
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

This repository contains the complete hardware design and firmware for a custom, fully functional buillt macropad based on the Seeed Studio XIAO RP2040 microcontroller.
Macropad is an open-source printed circuit board by yansha2903-bot, from the yansha2903-bot/Macropad repository on GitHub, published under the MIT licence. It is a 2-layer board of 133.1 × 47 mm with 9 parts on 18 nets, routed with 58 tracks and 0 vias.
It is built around the 1N4148W. Its parts include 4 diodes, 4 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
This repository contains the complete hardware design and firmware for a custom, fully functional buillt macropad based on the Seeed Studio XIAO RP2040 microcontroller.
KiCad — KiCad project files:*.kicad_pro — KiCad project configuration.*.kicad_sch — Electrical schematic.*.kicad_pcb — Custom PCB routing and layout.*Macropad-DrillFiles.zip - Drill files.*Macropad-Gerbers.zip - Gerbers.Firmware/ — Microcontroller source code:*.ino — Arduino IDE sketch for USB-HID keyboard emulation.Images - Images of my project.License - MIT License.Edge.Cuts layer.D0, D1, D2, and D3.D9.The firmware is written in C++ using the Arduino IDE and the native <Keyboard.h> library.
'1', '2', '3', and '4' respectively.| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 1 | XIAO-RP2040-DIP | Package_DIP:DIP-14_W7.62mm | U1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 133.1 × 47 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yansha2903-bot/Macropad repository on GitHub, at the commit this page was made from: the board is KiCad/Macropad.kicad_pcb and its schematic KiCad/Macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).