

Zaehler Modul
- Size
- 95 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 100
- Pads
- 244
- Tracks, vias
- 299, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 May 2022
- Updated
- 14 Aug 2024
Overview
Zaehler Modul is an open-source printed circuit board by yannickbock, from the yannickbock/saba repository on GitHub. It is a 2-layer board of 95 × 70 mm with 70 parts on 100 nets, routed with 299 tracks and 23 vias.
It is built around the STM32G030C8T6, UDN2981A-T and LM317, with the ULN2803A and BC847 among its other parts. Its parts include 25 resistors, 15 capacitors, 13 connectors, 6 ICs and 5 transistors. It belongs with the STM32 boards of this library.
Main components
5STM32G030C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2V~3.6V 32 Bit 44 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)UDN2981A-T
DIP18-3008-Channel Source DriversALLEGRO MICROSYSTEMUncategorisedLM317
SOT-223-40℃~+85℃@(Ta) 0.003%Vout 1 1.3V~37V 1A 40V 80dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | Conn_01x01 | Wire_Pads:SolderWirePad_single_1-2mmDrill | J2, J3, J4, J6, J7, J8, J9, J10, J11, J12, J13 |
| 8 | 470 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R30, R31, R32, R33, R34, R35, R36, R37 |
| 6 | 1nF | Capacitors_SMD:C_0805 | C40, C41, C50, C51, C53, C54 |
| 5 | BC847 | TO_SOT_Packages_SMD:SOT-23 | Q40, Q50, Q60, Q61, Q70 |
| 4 | 100k | Resistors_SMD:R_0805 | R40, R50, R61, R71 |
| 4 | 10µF | Capacitors_SMD:C_1206 | C10, C11, C20, C21 |
| 4 | MountingHole_Pad | Mounting_Holes:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1k | Resistors_SMD:R_0805 | R41, R51, R63 |
| 2 | 12pF | Capacitors_SMD:C_0805 | C82, C83 |
| 2 | 240 | Resistors_SMD:R_0805 | R10, R20 |
| 2 | 300 | Resistors_SMD:R_1206 | R1, R2 |
| 2 | 33k | Resistors_SMD:R_0805 | R60, R70 |
| 2 | LM317 | TO_SOT_Packages_SMD:TO-252-2 | U10, U20 |
| 1 | 100k | Potentiometers:Potentiometer_Trimmer_Bourns_3296W | RV80 |
| 1 | 100nF | Capacitors_SMD:C_0805 | C81 |
| 1 | 16MHz | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | Y80 |
| 1 | 2.2µF | Capacitors_SMD:C_0805 | C80 |
| 1 | 22nF | Capacitors_SMD:C_0805 | C52 |
| 1 | 3.3k | Resistors_SMD:R_0805 | R62 |
| 1 | 390 | Resistors_SMD:R_0805 | R21 |
| 1 | 47 | Resistors_SMD:R_0603 | R80 |
| 1 | 680 | Resistors_SMD:R_0805 | R11 |
| 1 | Conn_01x13 | Zaehler-Modul:Conn_01x13_3.5mm | J14 |
| 1 | STM32G030C8T6 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U80 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | J5 |
| 1 | U813BS | Resistors_THT:R_Array_SIP6 | U50 |
| 1 | UDN2981 | Housings_SOIC:SOIC-18W_7.5x11.6mm_Pitch1.27mm | U31 |
| 1 | ULN2803A | Housings_SOIC:SOIC-18W_7.5x11.6mm_Pitch1.27mm | U30 |
More from yannickbock/saba
12- 2 layers252 × 267.5 mm

- 2 layers252 × 172.5 mm

- 2 layers137 × 102 mm

- 2 layers195 × 95 mm

- 2 layers95 × 60 mm

- 2 layers275 × 98 mm
%2B9241/hardware/Skalen-Beleuchtung.kicad_pcb.jpg?size=s&soon)
- 2 layers137 × 102 mm

- 2 layers95 × 60 mm

- 2 layers155 × 47.5 mm

- 2 layers95 × 60 mm

- 2 layers80 × 70 mm

- 2 layers137 × 102 mm

Similar boards
- 2 layers

ControlBoard
knoerk/MicroGasExchange
Software, Circuits and PCB for microcontroller based gas exchange system
106 partsGPL-3.0 - 2 layers100 × 100 mm

Eigene Steuerplatine Line Decoder
CatoLynx/LAWO-Arduino
Arduino Nano adapter board for LAWO XY5 flipdot displays
32 parts3 - 2 layers100 × 100 mm

Flipdot Controller
Qeteshpony/Flipdot-Controller
Replacement controller for a Lawo Luminator Flipdot Display
58 parts2BSD-2-Clause - 2 layers88 × 78 mm

- 2 layers98.9 × 91.4 mm

Coin Cell Tester
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
204 parts17MIT - 2 layers170 × 120 mm

- 4 layers66 × 83.1 mm

Zumo PiZero
wallComputer/PiZumo_Robot
Git Folder to share hardware and software files for PiZumo Robot.
117 parts3GPL-2.0 - 4 layers30 × 37.5 mm

ER TFT1 69-1 Adapter
Wh1teRabbitHU/ER-TFT1.69-1_STM32-Driver
STM32 Driver for the following module: https://www.buydisplay.com/1-69-inch-color-280x240-round-rectangle-ips-tft-lcd-display-panel-st7789
31 parts1GPL-3.0
Questions
How big is the Zaehler Modul PCB?
It measures 95 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zaehler Modul use?
70 parts, built around the STM32G030C8T6, UDN2981A-T, LM317 and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zaehler Modul KiCad files?
From the yannickbock/saba repository on GitHub, at the commit this page was made from: the board is Module/Zaehler-Modul - 9241/hardware/Zaehler-Modul.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zaehler Modul design in my own project?
Its repository states no licence, so its author keeps all rights: ask yannickbock before reusing the design.