2 layers624.6 × 303.9 mm
SPU2
rraider/Seminarkurs2021
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital
736 parts7MIT
2 layers100 × 100 mm
Eigene Steuerplatine Line Decoder
CatoLynx/LAWO-Arduino3Arduino Nano adapter board for LAWO XY5 flipdot displays
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 112
- Pads
- 269
- Tracks, vias
- 518, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Apr 2020
- Updated
- 21 Nov 2023
Overview
Eigene Steuerplatine Line Decoder is an open-source printed circuit board by CatoLynx, from the CatoLynx/LAWO-Arduino repository on GitHub. It is a 2-layer board of 100 × 100 mm with 32 parts on 112 nets, routed with 518 tracks and 40 vias.
It is built around the R-78E5.0-0.5, UDN2981A-T and CD4514BM, with the ULN2803A, LM317T and BC547 among its other parts. Its parts include 9 ICs, 6 resistors, 4 capacitors, 4 connectors and 2 transistors.
Main components
7
R-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
UDN2981A-T
DIP18-3008-Channel Source DriversALLEGRO MICROSYSTEMUncategorised
CD4514BM
SOIC-24-300mil-55℃~+125℃ 100uA 3V~18V 4/16 6.8mA 6.8mA 970ns@5V,50pF CD4000 Decoder Single Supply SOIC-24-300mil Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
LM317T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
IRF740
TO-220-55℃~+175℃ 1 N-channel 1.162nF 100W 10A 17pF 32nC@10V 400V 4V 500mΩ@10V N-Channel TO-220 MOSFETs ROHSMinosMOSFETs
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R5, R6 |
| 4 | MountingHole | Connect:1pin | MH1, MH2, MH3, MH4 |
| 3 | 100n | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C1, C3, C4 |
| 2 | CD4514B | Housings_DIP:DIP-24_W15.24mm_LongPads | U3, U9 |
| 2 | UDN2981A | Housings_DIP:DIP-18_W7.62mm_LongPads | U7, U8 |
| 2 | ULN2803A | Housings_DIP:DIP-18_W7.62mm_LongPads | U4, U5 |
| 1 | custom:Heatsink_Fischer_SK95 | ||
| 1 | 100u | Capacitors_ThroughHole:C_Radial_D5_L11_P2.5 | C2 |
| 1 | 240 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3 |
| 1 | 56 | Resistors_ThroughHole:Resistor_Horizontal_RM20mm | R4 |
| 1 | 5k | Potentiometers:Potentiometer_Bourns_3296Y_3-8Zoll_Angular_ScrewUp | RV1 |
| 1 | Arduino Nano | custom:Arduino_Nano | U6 |
| 1 | BC547 | TO_SOT_Packages_THT:TO-92_Molded_Wide_Oval | Q1 |
| 1 | IRF740 | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q2 |
| 1 | LED | custom:Terminal_Conn_4pin_RM5.08 | P2 |
| 1 | LM317T | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U2 |
| 1 | MATRIX | Connect:IDC_Header_Straight_50pins | P3 |
| 1 | MUX | Connect:IDC_Header_Straight_20pins | P4 |
| 1 | POWER/DATA | custom:Terminal_Conn_4pin_RM5.08 | P1 |
| 1 | R-78E5.0-0.5 | custom:DC_DC_Converter_W11.5_L8.5_P2.54 | U1 |
| 1 | T500mA | custom:Fuseholder5x20_horiz_open_Schurter_0031_8201 | F1 |
Similar boards
- 2 layers100 × 100 mm
Flipdot Controller
Qeteshpony/Flipdot-Controller
Replacement controller for a Lawo Luminator Flipdot Display
58 parts2BSD-2-Clause - 2 layers88 × 78 mm
- 2 layers95 × 70 mm
- 2 layers160 × 100.1 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers100 × 100 mm
BulkyMIDI-32 Channel
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
122 parts80CC-BY-SA-4.0 - 2 layers143 × 118 mm
Multiplexer cell tester
Big-Red-Sat/Perovskite-Curve-Tracer
This repository contains the source hardware and software files for a passive, solar cell, curve tracer.
111 parts2 - 2 layers106.7 × 78.4 mm
Questions
How big is the Eigene Steuerplatine Line Decoder PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eigene Steuerplatine Line Decoder use?
32 parts, built around the R-78E5.0-0.5, UDN2981A-T, CD4514BM and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eigene Steuerplatine Line Decoder KiCad files?
From the CatoLynx/LAWO-Arduino repository on GitHub, at the commit this page was made from: the board is Eigene Steuerplatine Line Decoder.kicad_pcb and its schematic Eigene Steuerplatine Line Decoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eigene Steuerplatine Line Decoder design in my own project?
Its repository states no licence, so its author keeps all rights: ask CatoLynx before reusing the design.