2 layers252 × 267.5 mm
2 layers11.6 × 23.9 mm
M190B
yannickbock/saba- Size
- 11.6 × 23.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 24
- Pads
- 57
- Tracks, vias
- 97, 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 May 2022
- Updated
- 14 Aug 2024
Overview
M190B is an open-source printed circuit board by yannickbock, from the yannickbock/saba repository on GitHub. It is a 2-layer board of 11.6 × 23.9 mm with 8 parts on 24 nets, routed with 97 tracks and 3 vias.
It is built around the ATTINY1616-MN. Its parts include 3 capacitors, 3 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_SMD:C_0402 | C101, C103 |
| 2 | Conn_01x09 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | J3, J5 |
| 1 | 4µ7 | Capacitors_SMD:C_0402 | C102 |
| 1 | ATtiny1616-M | Housings_DFN_QFN:UQFN-20-1EP_3x3mm_Pitch0.4mm | U1 |
| 1 | Conn_01x03_Male | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | L78L05_SOT89 | TO_SOT_Packages_SMD:SOT-89-3 | U101 |
More from yannickbock/saba
12- 2 layers252 × 172.5 mm
- 2 layers137 × 102 mm
- 2 layers95 × 70 mm
- 2 layers195 × 95 mm
- 2 layers95 × 60 mm
- 2 layers275 × 98 mm
%2B9241/hardware/Skalen-Beleuchtung.kicad_pcb.jpg?size=s&soon)
- 2 layers137 × 102 mm
- 2 layers95 × 60 mm
- 2 layers155 × 47.5 mm
- 2 layers95 × 60 mm
- 2 layers80 × 70 mm
Similar boards
- 4 layers62.1 × 83.8 mm
Ss main board
loopj/short-stack
World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs
69 parts804 - 2 layers80 × 50 mm
- 4 layers100 × 68 mm
- 2 layers56.9 × 23.6 mm
Hexagon
kieraneglin/hexagon-art
A passive breakout board: two lever-terminal inputs, three JST XH outputs, all six conductors (RX bus, two spares, +12V, GND, +5V) paralleled straight across. No active components, no regulation, nothing to configure.
24 parts19 - 4 layers44.5 × 44.5 mm
Flashlight
engineerbo/flashlight-dev-hw
This repository contains design files for the development board for a flashlight boost driver. The test firmware can be found in the firmware repository.
73 parts15MIT - 2 layers29 × 36 mm
Flux Capacitor Micro Pin Badge
hojadurdy/Flux_Capacitor_Micro
A tiny (36mm x 29mm) pin badge and keychain PCB version of Flux Capacitor featuring 25 animated LEDs that animate to create the “fluxxing” effect.
48 parts6 - 4 layers50.3 × 21.5 mm
- 2 layers25.4 × 52 mm
Questions
How big is the M190B PCB?
It measures 11.6 × 23.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M190B use?
8 parts, built around the ATTINY1616-MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M190B KiCad files?
From the yannickbock/saba repository on GitHub, at the commit this page was made from: the board is Sonstiges/M190B/M190B.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M190B design in my own project?
Its repository states no licence, so its author keeps all rights: ask yannickbock before reusing the design.