
Archive
sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.

Remote Biometric Safe is an open-source printed circuit board by yamahdee, from the yamahdee/KICAD-Biometric-Safe repository on GitHub. It is a 2-layer board of 72 × 62.8 mm with 39 parts on 70 nets, routed with 179 tracks and 15 vias.
It is built around the CP2104EK, ESP32-WROOM-32D and TLV1117-33DCY, with the BC547 and BLM21PG221SH1 among its other parts. Its parts include 10 capacitors, 10 resistors, 4 diodes, 3 ICs and 3 transistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C6, C9 |
| 4 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C8, C10 |
| 4 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R10 |
| 4 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 3 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 3 | P LED | LED_SMD:LED_1206_3216Metric | D1, D3, D5 |
| 2 | 22R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 4u7 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | BLM21PG221 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB2 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | ST01x03 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x03_P3.50mm_Horizontal | J2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | USB_B_Mini | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |

sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.

Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.


Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms

jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design


Pyisoe-Thame/ESP_WROOM_32D
This repository contains files and designs created while following a YouTube tutorial on KiCad. The ESP-WROOM-32D is the same chip used in NodeMCU-32S development board.

YusufAlghoneimy/ESP32-PCB-Design
Youtube PCB reference: made by morten (https://www.youtube.com/watch?v=b-7bMl6fJio&t=8320s)
It measures 72 × 62.8 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the CP2104EK, ESP32-WROOM-32D, TLV1117-33DCY and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yamahdee/KICAD-Biometric-Safe repository on GitHub, at the commit this page was made from: the board is Remote Biometric Safe.kicad_pcb and its schematic Remote Biometric Safe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask yamahdee before reusing the design.