

UVLight
- Size
- 65.4 × 66.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 24
- Pads
- 135
- Tracks, vias
- 273, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Oct 2022
- Updated
- 11 Oct 2022
Overview
UVLight is an open-source printed circuit board by xLordiz3, from the xLordiz3/PCBs repository on GitHub. It is a 2-layer board of 65.4 × 66.8 mm with 38 parts on 24 nets, routed with 273 tracks and 3 vias.
It is built around the CH330N, ESP-12E and IFX27001TFV33ATMA1, with the IFX27001TFV50ATMA1, FQP30N06L and BS170 among its other parts. Its parts include 11 resistors, 6 capacitors, 5 connectors, 4 ICs and 4 transistors. It belongs with the ESP8266 boards of this library.
Main components
7CH330N
SOP-8-20℃~+70℃ 15mA 2Mbps 3.3V、5V Transceiver SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesIFX27001TFV33ATMA1
TO-252-3Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsInfineon TechnologiesIFX27001TFV50ATMA1
TO-252-3-40℃~+125℃ 1 1.4V@(1A) 1.6mA 1A 40V 5V 65dB@(120Hz) Fixed Over Current Protection、Overheat protection Positive TO-252-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSInfineon TechnologiesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsFQP30N06L
TO-220-3-55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHSonsemiMOSFETsBS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETsFQP47P06
TO-220F-3-55℃~+175℃ 1 P-Channel 1.3nF 110nC@10V 160W 26mΩ@10V 3.6nF 320pF 47A 4V 60V P-Channel ±25V TO-220F-3 MOSFETs ROHSonsemiMOSFETs
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R 10K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R4, R5, R6, R7 |
| 4 | C 10uF | Capacitor_SMD:CP_Elec_5x5.4 | C2, C3, C5, C6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1N4002 | Diode_SMD:D_SMA | D1, D2 |
| 2 | C 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C4 |
| 2 | Conn_01x02_Male | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3, J4 |
| 2 | FQP30N06L | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q2, Q4 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R8, R9 |
| 2 | R 22 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 2 | R 4.7K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R10, R11 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | BS170 | Package_TO_SOT_SMD:SOT-23W_Handsoldering | Q3 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | CH330N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_01x03_Male | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | ESP-12E | ESP:ESP-12E | U4 |
| 1 | FQP47P06 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | IFX27001TFV33ATMA1 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U3 |
| 1 | IFX27001TFV50ATMA1 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J2 |
More from xLordiz3/PCBs
12- 2 layers93.2 × 59.2 mm

- 2 layers

- 2 layers88.9 × 82.6 mm

- 2 layers64.1 × 58.2 mm

- 2 layers64.8 × 49.5 mm

- 2 layers75.1 × 49.2 mm

- 2 layers91 × 96.6 mm

- 2 layers33.2 × 23 mm

- 2 layers111.5 × 93.7 mm

- 2 layers36.5 × 31.3 mm

- 2 layers47.8 × 23.9 mm

- 2 layers55.9 × 47 mm

Similar boards
- 2 layers60 × 40 mm

Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers100 × 50 mm

- 4 layers69.5 × 42 mm

Buck converter breakout
scottchen10/buck_converter_breakout
MIC24066 Buck Converter Breakout Board for the Toronto Met. Robotics Team
44 parts - 2 layers50 × 50 mm

- 2 layers100 × 100 mm

Row driver
CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels
80 parts44 - 2 layers38.9 × 16.4 mm

Release serial i2c atmega328p switch
waynepiekarski/hydro-modem
HydroModem: Underwater Bell 103 modem implementation for low-power microcontrollers
34 parts3GPL-3.0 - 2 layers76.6 × 21.5 mm

Power Breakout
EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech
18 parts2MIT - 2 layers145 × 122.8 mm

Questions
How big is the UVLight PCB?
It measures 65.4 × 66.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UVLight use?
38 parts, built around the CH330N, ESP-12E, IFX27001TFV33ATMA1 and IFX27001TFV50ATMA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UVLight KiCad files?
From the xLordiz3/PCBs repository on GitHub, at the commit this page was made from: the board is UVLight/UVLight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UVLight design in my own project?
Its repository states no licence, so its author keeps all rights: ask xLordiz3 before reusing the design.