Skip to the content
2 layers117.6 × 62.8 mm8x8 LED Module, the printed circuit board in 3D

8x8 LED Module

xAllGood/PCB-Design

This repository contains the schematic, layout, and design files for my PCB project.

Size
117.6 × 62.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
50
Pads
99
Tracks, vias
250, 12
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Mar 2026
Updated
26 Mar 2026

Overview

8x8 LED Module is an open-source printed circuit board by xAllGood, from the xAllGood/PCB-Design repository on GitHub. It is a 2-layer board of 117.6 × 62.8 mm with 19 parts on 50 nets, routed with 250 tracks and 12 vias.

It is built around the SS12D07VG4. Its parts include 9 connectors, 3 switches, 2 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

markdown

PCB Design Project

This repository contains the schematic, layout, and design files for my PCB project.

🛠 Project Overview

  • EDA Software: [Insert software, e.g., KiCad/Altium]
  • Current Status: Initializing repository and documentation.
  • Key Features: [List key components or functions here]

🚀 Git & GitHub Procedure

These are the steps used to initialize this repository and push local changes to GitHub.

1. Initial Setup

Set your identity on this machine (only needs to be done once):

bash
git config --global user.name "Your Name"
bash
git config --global user.email "your_email@example.com"

Use code with caution. 2. Initialize Local Repo Navigate to your project folder and run:

bash
git init
git add .
git commit -m "Initial commit"
git branch -M main

Use code with caution. 3. Connect to GitHub Link the local folder to your remote GitHub repository:

bash
git remote add origin https://github.com

Use code with caution.

  1. Push Changes To upload your files to GitHub:
bash
git push -u origin main

Use code with caution.

  1. Daily Workflow (Update Files) Whenever you make changes to your design:
bash
git add .

git commit -m "Describe your changes here" git push Use code with caution.

Parts

19
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
21825967-1Button_Switch_THT:SW_1825967-1S2, S3
1ArduinoProMiniSimpleModule:ArduinoProMiniCustomU1
1Barrel_JackConnector_BarrelJack:BarrelJack_HorizontalJ5
1LED1OUTConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ2
1LED1_INConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ9
1LED2_INConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ8
1LED2_OUTConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ1
1LED3_INConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ3
1LED3_OUTConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ4
1LED4_INConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ6
1LED4_OUTConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ7
1SS12D07VG4Button_Switch_THT:SW_SS12D07VG4S1

More from xAllGood/PCB-Design

5
  • 4 layers27.9 × 56 mmESP32, the printed circuit board in 3D

    ESP32

    xAllGood/PCB-Design

    This repository contains the schematic, layout, and design files for my PCB project.

    34 parts
  • 2 layers59.1 × 38 mmMCU Datablogger, the printed circuit board in 3D

    MCU Datablogger

    xAllGood/PCB-Design

    This repository contains the schematic, layout, and design files for my PCB project.

    29 parts
  • 2 layers29.3 × 47.9 mmBreadbord Power Supply, the printed circuit board in 3D

    Breadbord Power Supply

    xAllGood/PCB-Design

    This repository contains the schematic, layout, and design files for my PCB project.

    17 parts
  • 2 layersFeatures demo, the printed circuit board in 3D

    Features demo

    xAllGood/PCB-Design

    This repository contains the schematic, layout, and design files for my PCB project.

    14 parts
  • 2 layers56.1 × 16.3 mmLED torch, the printed circuit board in 3D

    LED torch

    xAllGood/PCB-Design

    This repository contains the schematic, layout, and design files for my PCB project.

    5 parts

Similar boards

  • 2 layers91.5 × 78 mmPi Fly, the printed circuit board in 3D

    Pi Fly

    PashMohandes/Pi-Fly

    Significant improvement to OBAL (Open Board Autopilot Linux)

    30 parts7GPL-3.0
  • 2 layers70 × 99 mmCampfire console, the printed circuit board in 3D

    Campfire console

    MeghanaM4/campfire-console

    PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons

    71 parts1MIT
  • 4 layers89 × 81 mmDKWS PCB, the printed circuit board in 3D

    DKWS PCB

    danielkluka/Diploma-Thesis

    Design of a Secure Data Transmission System in NB-IoT Environment

    121 partsMIT
  • 2 layers72.5 × 100 mmSectr soldering kit, the printed circuit board in 3D

    Sectr soldering kit

    SparkMakerspace/sectr-soldering-kit

    This PCB was designed by the nerds at Spark Makerspace for use with Southeastern CT Robotics (SECTR) FLL teams in spring/summer 2023.

    7 parts
  • 2 layers64.1 × 119.8 mmSummer melt badge 2022, the printed circuit board in 3D

    Summer melt badge 2022

    SparkMakerspace/summer_melt_badge_2022

    This badge was designed for the 2022 Summer Melt at Spark Makerspace.

    13 parts
  • 2 layers75.9 × 105.9 mmMonorail badge bottom part, the printed circuit board in 3D

    Monorail badge bottom part

    zacharesmer/monorail-con-badge

    Design files and information for the monorail con badge

    34 parts

Questions

How big is the 8x8 LED Module PCB?

It measures 117.6 × 62.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 8x8 LED Module use?

19 parts, built around the SS12D07VG4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 8x8 LED Module KiCad files?

From the xAllGood/PCB-Design repository on GitHub, at the commit this page was made from: the board is Demo/8x8 LED Module/8x8 LED Module.kicad_pcb and its schematic Demo/8x8 LED Module/8x8 LED Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 8x8 LED Module design in my own project?

Its repository states no licence, so its author keeps all rights: ask xAllGood before reusing the design.